• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2003년도 추계 학술발표회논문집
• /
• pp.376-383
• /
• 2003

For more rational and economical seismic design of long span bridges, it is essential to include in the analysis the effects of multiple input motions and structural or soil nonlinearity which are not considered in the current design practice. In this paper, the effects of these factors on the seismic behavior of long span bridges are studied. First, for the effect of multiple input motions, we take into account the differences in arrival times of seismic waves. To consider nonlinear soil properties we utilize SHAKE which is based on the equivalent linearization method. As a numerical example, a cable-stayed bridge is modelled using the analytical procedures described above. It is shown from the results that the these factors influence the seismic response of the bridge significantly and should never be neglected in design.

• 정보처리학회논문지A
• /
• 제9A권3호
• /
• pp.271-280
• /
• 2002

본 논문에서는 Perfect Shuffle 기법과 Kronecker 곱에 의한 다치 신호처리회로의 입출력 상호연결에 대하여 논하였고, 다치 신호처리회로의 입출력 상호연결 방법을 이용하여 유한체 GF$(p^m)$상에서 다치 신호처리가 용이한 다치 Reed-Muller 전개식의 회로설계 방법을 제시하였다. 제시된 다치 신호처리회로의 입출력 상호연결 방법은 모듈구조를 기반으로 하여 행렬변환을 이용하면 회로의 가산게이트와 승산게이트를 줄이는데 매우 효과적임을 보인다. GF$(p^m)$상에서 다치 Reed-Muller 전개식에 대한 다치 신호처리회로의 설계는 GF（3）상의 기본 게이트들을 이용하여 다치 Reed-Muller 전개식의 변환행렬과 역변환행렬을 실행하는 기본 셀을 설계하였고, 다치 신호처리회로의 입출력 상호연결 방법을 이용하여 기본 셀들을 상호연결하여 실현하였다. 제안된 다치 신호처리회로는 회선경로 선택의 규칙성, 간단성, 배열의 모듈성과 병렬동작의 특징을 가지므로 VLSI 화에 적합하다

• Journal of electromagnetic engineering and science
• /
• 제18권2호
• /
• pp.144-144
• /
• 2018

• ETRI Journal
• /
• 제30권6호
• /
• pp.765-773
• /
• 2008

Spatial correlation is a result of insufficient antenna spacing among multiple antenna elements, while temporal correlation is caused by Doppler spread. This paper compares the effect of spatial and temporal correlation in order to investigate the performance of multiuser scheduling algorithms in multiple-input multiple-output (MIMO) broadcast channels. This comparison includes the effect on the ergodic capacity, on fairness among users, and on the sum-rate capacity of a multiuser scheduling algorithm utilizing statistical channel state information in spatio-temporally correlated MIMO broadcast channels. Numerical results demonstrate that temporal correlation is more meaningful than spatial correlation in view of the multiuser scheduling algorithm in MIMO broadcast channels. Indeed, the multiuser scheduling algorithm can reduce the effect of the Doppler spread if it exploits the information of temporal correlation appropriately. However, the effect of spatial correlation can be minimized if the antenna spacing is sufficient in rich scattering MIMO channels regardless of the multiuser scheduling algorithm used.

• Journal of information and communication convergence engineering
• /
• 제8권4호
• /
• pp.393-398
• /
• 2010

For multi-cell environments, coordinated random beamforming technique in multiuser MIMO(multiple-input multiple-output) broadcast channel is considered. In order to mitigate severe interference at receivers, the multi-cell environments might require complex transmitter and receiver design because the scheduler decision based on full channel state information (CSI) in one cell must be intertwined with decision made by other cells' CSI. With limited CSI, however, this paper considers a scheme of randomizing transmitters' beamforming but being coordinated with other cell transmitters. The transmitters in each cell share random beamforming patterns and schedule data transmission within coherent scheduling period. The corandomized beams allow the users to be selected with the highest SINRs even in multi-cell environments. We analyze the performance of the proposed scheme. And numerical results show that the scheme achieves better performance than the conventional random beamforming when applying to multi-cell environments.

• Journal of Communications and Networks
• /
• 제9권3호
• /
• pp.254-264
• /
• 2007

A promising approach to improve the performance of mobile location system is the use of antenna arrays in both transmitter and receiver sides. Using advanced array signal processing techniques, such multiple-input multiple-output (MIMO) communication systems can offer more mobile location information by exploiting the spatial properties of the multipath channel. In this paper, we propose a novel approach to determine the position of mobile terminal based on estimated multipath signal parameters using only one base station in MIMO communication systems. This approach intends to minimize the error occurring from the estimation of multiple paths and gives an optimal estimation of the position of mobile terminal by simultaneously calculating a set of nonlinear location equations. This solution breaks the bottleneck of conventional mobile location systems which have to require multilateration of at least three base stations.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2008년도 정보통신설비 학술대회
• /
• pp.525-530
• /
• 2008

There are a few core technologies to enable high-performance $4^{th}$ generation (4G) broadband wireless communication system. A multiple input multiple output (MIMO) provides high-rate transmission through expended channels by multiple array antennas in both sender and receiver side. Also orthogonal frequency division multiplexing (OFDM) is well-known as the most appropriate technique for high data rate transmission such as Mobile WiMAX and WLAN. Efficient decrease of inter-carrier interference (ISI) and inter-carrier interference (ICI) are the reasons for why OFDM is suitable for high-performance transmission, 4G mobile communication. In this paper, we mainly focus on two of objects, combination between MIMO and OFDM, and OFDM channel simulator using Ray-tracing algorithm. The results of this paper can be used implementation of a Wireless Software Platform for 4G Mobile Communication Systems.

• 한국통신학회논문지
• /
• 제37권5C호
• /
• pp.376-383
• /
• 2012

본 논문은 상호 간 간섭을 주는 두 개의 다중입력 다중출력 간섭 브로드캐스트 채널 (MIMO-IBC: Multiple input multiple output-interfering broadcast channel)에서 공통된 잡음 없는 백본(backbone)망을 통해 두 기지국이 상호간의 사용자 데이터를 공유할 수 있을 때의 공간적 다중화 이득 (SMG: Spatial multiplexing gain)의 일반적인 공식을 유도하였다. 본 MIMO-IBC 모델은 다중안테나를 갖는 두 개의 기지국과 각각 다수의 다중안테나 사용자가 있고, 모두 고정된 채널을 통해 독립적인 메시지를 송신한다고 가정한다. 최종 유도된 결과로부터 다양한 상황의 안테나 분포뿐 만 아니라 기지국 협력 유무에 따른 공간적 다중화 이득의 변화를 정량적으로 관찰할 수 있다. 그리고 사용자들 사이에 완전한 협력이 되는 상황과 본 MIMO-IBC 모델에서의 유도된 SMG 결과를 비교하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제7권10호
• /
• pp.2464-2478
• /
• 2013

Image stitching techniques produce an image with a wide field-of-view by aligning multiple images with a narrow field-of-view. While conventional algorithms successfully stitch images with a small parallax, structure misalignment may occur when input images contain a large parallax. This paper presents an image stitching algorithm that aligns images with a large parallax by regional linear warping. To this end, input images are first approximated as multiple planar surfaces, and different linear warping is applied to each planar surface. For approximating input images as multiple planar surfaces, the concept of dominant edges is introduced. Dominant edges are defined as conspicuous edges of lines in input images, and extracted dominant edges identify the boundaries of each planar surface. Dominant edge extraction is conducted by detecting distinct changes of local characteristics around strong edge pixels. Experimental results show that the proposed algorithm successfully stitches images with a large parallax without structure misalignment.

• 한국인쇄학회지
• /
• 제25권1호
• /
• pp.11-26
• /
• 2007

In this paper, an experiment was done where the input device used the linear multiple regression and the sRGB color space to perform a color transformation. The output device used the GOG, GOGO and sRGB for the color transformation. After the input device underwent a color transformation, a $3\;{\times}\;20\;size$ matrix was used in a linear multiple regression and the scanner's color representation of scanner was better than a digital still camera's color representation. When using the sRGB color space, the original copy and the output copy had a color difference of 11. Therefore it was more efficient to use the linear multiple regression method than using the sRGB color space. After the input device underwent a color transformation, the additivity of the LCD monitor's R, G and B signal value improved and therefore the error in the linear formula transformation decreased. From this change, the LCD monitor with the GOG model applied to the color transformation became better than LCD monitors with other models applied to the color transformation. Also, the color difference varied more than 11 from the original target in CRT and LCD monitors when a sRGB color transformation was done in restricted conditions.