• 제목/요약/키워드: Multiple-Chain

검색결과 566건 처리시간 0.024초

P2P 기반의 UCC 방송에서 협상을 통한 업로드 트래픽의 개선 (Improvement of Upload Traffic through Negotiation in UCC Broadcasting System)

  • 김지훈
    • 디지털산업정보학회논문지
    • /
    • 제10권3호
    • /
    • pp.171-179
    • /
    • 2014
  • Among the P2P based multimedia streaming architecture, multiple chain architecture has advantage in adapting to dynamically changing network topology simply and rapidly, so this architecture is used for UCC broadcasting system. In UCC broadcasting system, general peer involved in DSLAM becomes UCC server rather than broadcasting system that transfers data from ISP servers. Therefore UCC data generated from UCC server peers is transmitted to peers through DSLAM, and this transmission uses uplink bandwidth of DSLAM. In this paper, I propose an efficient management method of DSLAM uplink bandwidths through negotiating tracker and UCC server peer or head peers of DSLAM. I propose the method that tracker restricts a bitrate of uplink stream of UCC servers when used uplink bandwidth of DSLAM exceeds a certain point of maximum uplink bandwidths. I will show the improved performance of proposed scheme rather than general method with respect to the uplink bandwidth of DSLAM by numerical analysis and simulation.

Position Control of Chained Multiple Mass-Spring-Damper Systems - Adaptive Output Feedback Control Approaches

  • S. S. Ge;L. Huang;Lee, T. H.
    • International Journal of Control, Automation, and Systems
    • /
    • 제2권2호
    • /
    • pp.144-155
    • /
    • 2004
  • This paper addresses the issue of position control of a chain of multiple mass-spring-damper (CMMSD) units which can be found in many physical systems. The dynamic model of a CMMSD system with any degrees of freedom is expressed in a closed-form for the convenience of the controller design. Backstepping and model reference adaptive control (MRAC) approaches are then used to develop two adaptive output feedback controllers to control the position of a CMMSD system. The proposed controllers rely on the measurements of the input (force) and the output (position of the mass unit at the end of the chain) of the system without the knowledge of its parameters and internal states. Simulations are used to verify the effectiveness of the controllers

트리즈와 공리적 설계를 이용한 새로운 자전거용 자동변속장치의 개념설계에 대한 연구 (A Conceptual Design of New Automatic Bicycle Transmission by TRIZ and Design Axiom)

  • 이건상;최준호
    • 대한기계학회논문집A
    • /
    • 제33권3호
    • /
    • pp.269-275
    • /
    • 2009
  • This paper represents a study on the conceptual design of new automatic bicycle transmission. The gear change in a commercial bicycle is carried out by moving the chain between sprockets. By the use of a multiple sprocket for speed change the power loss and transmission shock may occur. To solve the problem of bicycle transmission, the improved solution was derived by the technical contradiction matrix of TRIZ. The conceptual solution is one sprocket which replaces the function of multiple sprockets and adapts actively to the pitch of chain. And it was confirmed to be an adequate design through the Independence Axiom of design axiom.

A CONCEPTUAL DESIGN OF NEW AUTOMATIC BICYCLE TRANSMISSION BY TRIZ AND DESIGN AXIOM

  • 이건상;최준호
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2008년도 추계학술대회A
    • /
    • pp.1022-1027
    • /
    • 2008
  • This paper represents a study on the conceptual design of new automatic bicycle transmission. The gear change in a commercial bicycle is carried out by moving the chain between sprockets. By the use of a multiple sprocket for speed change the power loss and transmission shock may occur. To solve the problem of bicycle transmission, the improved solution was derived by the technical contradiction matrix of TRIZ. The conceptual solution is one sprocket which replaces the function of multiple sprockets and adapts actively to the pitch of chain. And it was confirmed to be an adequate design through the Independence Axiom of design axiom.

  • PDF

WSN 환경에서 이중체인 구성을 통한 LECEEP 프로토콜 개선(A-LECEEP) (Improvement of LECEEP Protocol through Dual Chain Configuration in WSN Environment(A-LECEEP, Advanced LEACH based Chaining Energy Efficient Protocol))

  • 김찬혁;권태욱
    • 한국멀티미디어학회논문지
    • /
    • 제24권8호
    • /
    • pp.1068-1075
    • /
    • 2021
  • Wireless sensor network (WSN) can be usefully used in battlefields requiring rapid installation and operation by enabling surveillance and reconnaissance using small sensors in areas where any existing network infrastructure is not formed. As WSN uses battery, energy efficiency acts as a very important issue in network survivability. Layer-based routing protocols have been studied a lot in the aspect of energy efficiency. Many research selected LEACH and PEGASIS protocols as their comparison targets. This study examines the two protocols and LECEEP, a protocol designed by combining their advantages, and proposes a new protocol, A-LECEEP, which is more energy efficient than the others. The proposed protocol can increase energy efficiency compared to the existing ones by eliminating unnecessary transmissions with multiple chains configuration.

다중플랜트 네트워크에서의 공급사슬계획 (Supply Chain Planning in Multiplant Network)

  • 정재혁;문치웅;김종수
    • 한국산업경영시스템학회:학술대회논문집
    • /
    • 한국산업경영시스템학회 2002년도 춘계학술대회
    • /
    • pp.203-208
    • /
    • 2002
  • In case of the problems with multiple plants, alternative operation sequence, alternative machine, setup time, and transportation time between plants, we need a robust methodology for the integration of process planning and scheduling in supply chain. The objective of this model is to minimize the tardiness and to maximize the resource utilization. So, we propose a multi-objective model with limited-capacity constraint. To solve this model, we develope an efficient and flexible model using adaptive genetic algorithm(AGA), compared to traditional genetic algorithm(TGA)

  • PDF

다중 노드 네트워크를 이용한 내공변위 계측 시스템 (Design of Inner Section Displacement Measurement System Using Multiple Node Networks)

  • 서석훈;우광준
    • 조명전기설비학회논문지
    • /
    • 제15권6호
    • /
    • pp.20-26
    • /
    • 2001
  • 본 논문에서는 터널의 내공변위를 측정하고 측정된 데이터를 효율적으로 관리하는 계측 시스템을 설계하였다. 계측 시스템은 마이크로콘트롤러로와 포텐시오메터형 변위센서로 구성되는 Intelligent Sensing Head와 계측 시스템을 운용하고 측정된 데이터를 관리하는 호스트 컴퓨터로 구성된다. Intelligent Sensing Mead와 호스트 컴퓨터는 다중노드 통신방식에 의하여 연결되며 다중노드 네트워크의 안정된 동작을 위하여 Daisy-Chain 형태로 네트워크를 구성하였고 Fail-Safe 회로를 설계하였으며 Modbus 프로토콜을 사용하여 시스템의 범용성을 높였다. 호스트 컴퓨터는 종합관리 소프트웨어에 의하여 다양한 측정조건을 선택할 수 있으며 데이터베이스를 이용하여 측정된 데이터를 관리한다. 설계된 시스템은 터널에 설치되어 효용성을 확인하였다.

  • PDF

Detection of RNA Mycoviruses in Wild Strains of Lentinula edodes in Korea

  • Kim, Eunjin;Park, Mi-Jeong;Jang, Yeongseon;Ryoo, Rhim;Ka, Kang-Hyeon
    • 한국균학회지
    • /
    • 제49권3호
    • /
    • pp.285-294
    • /
    • 2021
  • In general, mycoviruses remain latent and rarely cause visible symptoms in fungal hosts; however, some viral infections have demonstrated abnormal mycelial growth and fruiting body development in commercial macrofungi, including Lentinula edodes. Compared to other cultivated mushrooms, L. edodes is more vulnerable to viral infections as it is still widely cultivated under near-natural conditions. In this study, we investigated whether Korean wild strains of L. edodes were infected by RNA mycoviruses that have previously been reported in other parts of the world (LeSV, LePV1, LeV-HKB, LeNSRV1, and LeNSRV2). Using specific primer sets that target the RNA-dependent RNA polymerase genes of each of the RNA mycovirus, reverse transcription-polymerase chain reaction (RT-PCR) was used to detect viral infection. Viral infection was detected in about 90% of the 112 wild strains that were collected in Korea between 1983 and 2020. Moreover, multiple infections with RNA mycoviruses were detected in strains that had normal fruiting bodies. This work contributes to our understanding of the distribution of RNA mycoviruses in Korea and the impact of multiple viral infections in a single strain of L. edodes.

복수 제품의 병렬 생산 설비별 생산량 할당 방법에 관한 연구 (Apportioning the Production Quantities into Parallel Production Facilities for Multiple Products)

  • 김태복
    • 경영과학
    • /
    • 제24권1호
    • /
    • pp.63-76
    • /
    • 2007
  • To realize the mass customization entails the optimized supply chain design for efficiently producing and delivering the various products. In this study, we considered the problem obtaining the optimized production policy under the situation wherein the multiple products are apportioned into multiple parallel production facilities. More specifically, the production set-up costs incurs according to whether the production facilities are utilized or not. The facility-dependent set-up costs increase the problem complexity in solving the production apportioning problem for multiple products. This problem can be formulated as concave minimization problem, which is known as NP-hard problem. In this paper, a heuristic algorithm is proposed to solve two conjoint problems : one is to select the cost-effective facilities from alternative multiple production facilities and the other is to apportion the production lot to those selected facilities.

LVDS를 이용한 daisy-chain 방식의 다중 LCD 시스템 개발 (Multiple LCD System Development of daisy-chain Method using LVDS)

  • 김재철
    • 한국정보통신학회논문지
    • /
    • 제16권12호
    • /
    • pp.2747-2754
    • /
    • 2012
  • 본 논문에서 PC 컨텐츠의 활용을 극대화시키는 부가기능을 갖는 다중 LCD(Liquid Crystal Display) 시스템을 개발하였다. 이는 host LCD와 slave LCD로 구성되어 있다. Host LCD는 NTSC(National Television System Committee), PAL(Phase Alternation Line), SECAM(S$\acute{e}$quentiel couleur avec m$\acute{e}$moire) 신호를 받아 영상 및 음성을 데코딩하여 출력한다. 이 데코딩된 신호들을 LVDS(Low Voltage Differential Signaling) 신호로 변환하여 slave LCD단으로 전송을 하는 기능을 갖는다. 그리고 CF 메모리, USB 메모리등을 장착하여 멀티미디어 데이터를 출력하도록 한다. Slave LCD는 host LCD와 달리 튜너부분이 없고 메모리 장착이 되지 않아 자체 TV 신호 수신 및 영상 신호 재생을 하지 못한다. 다만, LVDS 영상 신호를 받아 LCD 팬널에 출력하는 기능만 갖도록 한다. 본 논문에서 개발한 다중 LCD 시스템은 제품이 단순하여 상대적으로 고장률이 낮고, 가격이 저렴하고 제어부분의 간소화로 디스플레이의 전력이 낮으며, host LCD의 채널, 볼륨 및 영상 출력에 대하여 전체 slave LCD를 제어할 수 있는 제품으로서의 가격 및 기능 경쟁력을 갖추고 있다.