• 산업경영시스템학회지
• /
• 제28권1호
• /
• pp.55-63
• /
• 2005

This paper is to analyze the travel distance and the transport size of the vehicle when the AGV carries multiple-load in the tandem automated guided vehicle systems. The size of multiple-load represents the number of load that the AGV can carry simultaneously. The AGV can carry simultaneously multiple-load that load types are different. The transport system of the manufacturing system is a tandem configuration automated guided vehicle system, which is based on the partitioning of all the stations into several non-overlapping single closed loops. Each loop divided has only one vehicle traveling unidirectionally around it. The AGV of each loop has to have sufficient transport capacity that can carry all loads for given unit time. In this paper, the average loaded travel distance and the size of feasible multiple-load of the vehicle are analyzed. A numerical example is shown.

• 한국지반공학회논문집
• /
• 제34권6호
• /
• pp.37-47
• /
• 2018

본 연구에서는 모래다짐말뚝(sand compaction pile, SCP)과 자갈다짐말뚝(gravel compaction pile, GCP)으로 보강된 지반의 극한지지력을 예측할 수 있는 식을 제안하고자 34개의 국내외 실내재하시험 데이터를 수집하고 이를 분석하였다. 수집된 자료를 기존의 이론식에 의한 극한지지력 산정 값과 비교하여 기존 이론식의 예측 정도를 파악하였다. 또한 극한 지지력 예측식을 제안하고자 다중회귀분석을 수행하였으며, 단일잔류 교차검증에 따른 예측오차평가를 통하여 가장 효율적인 입력변수의 수 및 조합을 선정하였다. 최종적으로 SCP와 GCP의 실내재하시험에 대한 극한 지지력을 예측하기 위한 다중회귀식을 제안하였으며 그 성능을 평가하였다.

• 조명전기설비학회논문지
• /
• 제29권2호
• /
• pp.33-39
• /
• 2015

Power supplying capacity of the distribution feeder should be maintained within thermal capacity of the wire. This paper presents the minimum spanning tree based load balancing technique to release multiple overloading of distribution feeders. In order to minimize number of involved backup feeders, Dijkstra and Prim algorithm are adopted to construct minimum spanning tree. Simulation testing result based on part of KEPCO's commercial distribution systems shows effectiveness of proposed scheme.

• 산업공학
• /
• 제19권1호
• /
• pp.1-8
• /
• 2006

The mobile communication network has to offer good quality of services (QoS), high capacity, and more coverage at a lower cost. However, with the increase of cellular user, the shortage of capacity due to unbalanced call distribution and lack of QoS are common. This paper deals with dynamic sectorization for efficient resource management to solve load unbalancing among microcells in CDMA (Code Division Multiple Access) microcellular system. Dynamic load balancing can be effected by grouping micro-cells properly and grouping can be developed through a routing mechanism. Therefore, we use ants and their routes to choose the optimum grouping of micro-cells into sectors using Multiple Ant Colony System (MACS)in this paper.

• 한국터널지하공간학회 논문집
• /
• 제8권3호
• /
• pp.273-287
• /
• 2006

본 연구에서는 숏크리트 라이닝과 2차 콘크리트 라이닝 사이에 방수막으로 분리된 기존 이중구조의 터널 라이닝과 터널 라이닝 단면상에 전단력 전달을 저해하는 장치를 포함하지 않은 일체화 싱글쉘 구조의 터널 라이닝의 파괴양상 및 하중 지지성능에 관해 고찰한다. 하중지지력 평가를 위하여 우선적으로 수치해석적인 사전 평가가 실시되었으며, 새롭게 고안된 실대형 터널 라이닝 하중재하 실험이 실시되었다. 이때, 이완하중이나 암괴하중을 모사하기 위해 터널 천단부 집중하중이 고려되었다. 본 연구를 통하여, 동일한 터널라이닝 강도 관리기준에서 이중구조 라이닝보다 싱글쉘 라이닝 구조가 약 20%정도 높은 지지력을 보였으며, 다중 숏크리트 타설 단계마다 고성능 첨가재료 투입량의 조절로 복합재료 싱글쉘 라이닝 구조를 형성함으로써 보다 적은 고성능화 첨가재료 투입량으로 유사한 지지성능을 확보할 수 있는 가능성을 보였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제15권1호
• /
• pp.189-197
• /
• 2011

구조실험에서 정확성과 효율성을 높이기 위해서는 적절한 실험장치를 적용하는 것은 중요한 요소이다. 특히, 대규모의 구조 실험에서 적절한 실험장치는 비용과 시간을 절감할 수 있다. 액츄에이터와 유압잭 및 UTM은 실험체의 휨 능력을 평가하는 데 일반적으로 적용되고 있다. 그러나, 대규모 실험체에서 다점 다하중 가력하중이 적용되어야 하는 경우에는 기존의 UTM 등을 이용하는 실험방법은 정확한 하중을 가력하기에 어려움이 많다. 이를 해결하기 위하여 본 연구에서는 실험결과의 정확성과 효율성을 높이기 위하여 기존의 실험장치로 조합된 새로운 방법을 개발하였다.

• 한국통신학회논문지
• /
• 제29권9B호
• /
• pp.771-777
• /
• 2004

In a COMA system, the capacity is variable and mainly depends on multiple access interference. The multiple access interference has a deep relationship with transmitted or received power. The capacity of COMA2000 system is considered to be limited by the forward link capacity. In this paper, we show that the forward link cell load can be represented by the total transmitted power of base station and we propose a forward link call admission control (CAC) strategy for COMA2000 system. The proposed call admission scheme adopts the rate control algorithm for data call. This call admission scheme enables the system to utilize radio resource dynamically by controlling data rate according to the cell load status, and enhance the system throughput and grade of service (GoS). quality of service(QoS) such as blocking and outage probability.

• Steel and Composite Structures
• /
• 제25권5호
• /
• pp.603-615
• /
• 2017

This experimental research presents the seismic performance of steel reinforced high-strength concrete (SRHC) short columns. Eleven SRHC column specimens were tested under simulated earthquake loading conditions, including six short column specimens and five normal column specimens. The parameters studied included the axial load level, stirrup details and shear span ratio. The failure modes, critical region length, energy dissipation capacity and deformation capacity, stiffness and strength degradation and shear displacement of SRHC short columns were analyzed in detail. The effects of the parameters on seismic performance were discussed. The test results showed that SRHC short columns exhibited shear-flexure failure characteristics. The critical region length of SRHC short columns could be taken as the whole column height, regardless of axial load level. In comparison to SRHC normal columns, SRHC short columns had weaker energy dissipation capacity and deformation capacity, and experienced faster stiffness degradation and strength degradation. The decrease in energy dissipation and deformation capacity due to the decreasing shear span ratio was more serious when the axial load level was higher. However, SRHC short columns confined by multiple stirrups might possess good seismic behavior with enough deformation capacity (ultimate drift ratio ${\geq}2.5%$), even though a relative large axial load ratio (= 0.38) and relative small structural steel ratio (= 3.58%) were used, and were suitable to be used in tall buildings in earthquake regions.

• 한국철도학회논문집
• /
• 제3권2호
• /
• pp.84-91
• /
• 2000

The general concept of reinforced roadbed in the high-speed railway is to cope with the soft ground for the bearing capacity and settlement of foundation soil. The cyclic plate load tests were performed to determine the behavior of reinforced ground with multiple layers of geogrid underlying by soft soil. With the test results, the bearing capacity ratio, elastic rebound ratio, subgrade modulus and the strain of geogrids under loading were investigated. Based on these plate load tests, laboratory model tests under cyclic loading were conducted to estimate the effect of geogrid reinforcement in particular for the high-speed rail roadbed. The permanent settlement and the behavior of earth pressure in reinforced roadbed subjected to a combination of static and dynamic loading are presented.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 가을 학술발표회 논문집
• /
• pp.285-292
• /
• 1999

The cyclic plate load test were peformed to determine the behavior of reinforced soft ground with multiple layers of geogrid. Five series of test were conducted with varying the soil profile conditions which including the ground level, type of soil, and the thickness of each soil layer. The plate load test equipment was slightly modified to apply the cyclic load. Based on the cyclic plate load test results, the bearing capacity ratio(BCR), subbase modules, shear modules, the elastic rebound ratio, and reinforcing parameters are presented.