• 한국소음진동공학회논문집
• /
• 제25권4호
• /
• pp.255-265
• /
• 2015

Shelter system is applying to weapon systems as usage of performing specific mission with arranging several electronic equipments and operators. Recently the electronic equipments is changing from development products to COTS(commecial off-the-shelf) for demonstrating high performance at low cost. As internal operators of shelter system conduct several missions for specific or long time in this present situation, one of the most important element considering the best combat power is internal noise level. Therefore, I desire to analyze the features and foresee multiple noise level with test for conforming whether requirements of design is met or not in this research paper.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.367-371
• /
• 2005

Social noise survey on multiple residential noises such as nut impact, air-borne, bathroom, drainage and traffic noises was conducted to investigate major variables affecting the overall satisfaction for noise environment The effect of individual noise perception on the evaluation of the overall noise environment was investigated through a questionnaire survey on annoyance, disturbance and noise sensitivity. Auditory experiments was also undertaken to determine noise level according to the percent of satisfaction for individual noise source. As a result of survey, it was found that satisfaction for floor impact noise most greatly affects the overall satisfaction for noise environment and annoyance most greatly affects the satisfaction for individual noise sources. Result of auditory experiment showed that the noise level of floor impact noise by bang machine, airborne, drainage and traffic noise corresponding to 50% satisfaction is 44dB($L_{i,Fmax,AW}$) and 40dBA, respectively.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.789-792
• /
• 2005

The dominant noise sources of Diesel Multiple Units are powerpack, which is composed of engine, transmission and cooling system, noise and wheel-rail rolling noise. The interior noise of a running vehicle is determined by structure-borne noise and air-borne noise from these noise sources. The contributions of interior noise from each noise source are calculated by air-borne transfer functions and structure-borne transfer functions of noise sources. In this paper, source separation technique is proposed to determine these transfer functions from the results of stationary and running tests of existing vehicle. With this technique, it is possible to get hold of contributions of interior noise from .noise sources of running vehicle. This source separation technique makes it possible to take efficient measures for reduction of interior noise at the early car-development stage.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.649-653
• /
• 2006

Engine Noise is composed of the mechanical and combustion noise. The contribution of combustion noise is generally bigger than the contribution of the mechanical noise at idle condition in DI diesel engine. That noise usually makes a roughness problem at the fundamental engine order. It is difficult to remove the modulation frequency so we have to directly reduce the combustion noise. The key effect of combustion noise reducing solution is the modification of the combustion pressure profile. It is accomplished by the multiple injection method and we solved the 400Hz combustion noise and improved the sound quality at idle condition in DI diesel engine.

• 감성과학
• /
• 제16권4호
• /
• pp.481-492
• /
• 2013

이 연구는 성인 남녀 462명을 대상으로 사전 설문검사를 통해 성별, 손잡이, 혈액형, 연령 등의 개인별 특성 집단과 다중지능 유형별 점수를 분류하였다. 그런 다음 뇌파측정시스템을 이용하여 전전두엽 부위인 Fp1과 Fp2 부위에 측정 전극을 부착하고 무자극 상태와 순수한 Pink noise 청각자극 상태에서의 집중력의 변화와 다중지능과의 관계를 알아보고자 하였다. 공분산분석 결과, 무자극에 비해 Pink noise 자극 시 대상자 전체의 평균 집중력이 유의하게 높게 나타났다. 개인별 특성에서는 남녀 성별을 제외한 왼손잡이, A형, 30대 집단에서 집중력이 유의하게 높게 나타났다. 그리고 무자극에 비해 Pink noise 상태의 집중력은 공간적 지능과의 관계가 더욱 강화되었고, 음악적 지능과는 음적 상관관계를 형성하였다. 이러한 결과는 집중력 향상을 위한 Pink noise 활용 시 개인별 특성을 반영해야할 필요성이 있음을 시사하였다.

• 한국소음진동공학회논문집
• /
• 제14권9호
• /
• pp.884-890
• /
• 2004

In this paper, an index for the evaluation of vehicle intake booming noise is developed through a correlation analysis of objective measurement data and subjective evaluation data. First, intake orifice noise is measured at the wide-open test condition. And then, acoustic transfer function between intake orifice noise and interior noise at the steady state condition is estimated. Simultaneously, subjective evaluation was carried out with a ten-scale score by 8 engineers. Next, the correlation analysis between the psycho-acoustic parameters derived from the measured data and the subjective evaluation is performed. The most critical factor was determined and the corresponding index for the intake booming noise is obtained from the multiple factor regression method. At last, the effectiveness of the proposed index is validated.

• 한국소음진동공학회논문집
• /
• 제16권11호
• /
• pp.1093-1099
• /
• 2006

In general, a measuring instrument of sound noise use only one wired channel by one sensor. Therefor the measuring instrument use wired cables as the number of channels are provided by instrument. In a point of observed target it needs data from multiple sensors and In case of measured point is a large numbers the environment of constitution would be complicated because that is in need of channel and cable. So we need the method that can improve the existing transmission channel and cable environment even the measured point is increased. If we use the Code Division Multiple Access(CDMA) we transmit a large numbers of sensor data by using a common transmission channel. We present the method that transmits data of multiple sensor to wireless by using CDMA. This method can simplify the measurement environment dramatically when collecting data by using multiple sensor. We expect this study to contribute the part of multiple access technology and relation technologies on the measuring environment.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.133-137
• /
• 2006

In general, a measuring instrument of sound noise use only one wired channel by one sensor. Therefor the measuring instrument use wired cables as the number of channels are provided by instrument. In a point of observed target it needs data from multiple sensors and In case of measured point is a large numbers the environment of constitution would be complicated because that is in need of channel and cable. So we need the method that can improve the existing transmission channel and cable environment even the measured point is increased. If we use the Code Division Multiple Access(CDMA) we transmit a large numbers of sensor data by using a common transmission channel. We present the method that transmits data of multiple sensor to wireless by using CDMA. This method can simplify the measurement environment dramatically when collecting data by using multiple sensor. We expect this study to contribute the part of multiple access technology and relation technologies on the measuring environment.

• 한국소음진동공학회논문집
• /
• 제26권5호
• /
• pp.616-624
• /
• 2016

Design of shelter system requires consideration of noise at operators’ positions, because noise can injure person’s health. That is why studies which analyze and predict noise at operator’s positions is essential. To analyze noise sources of shelter system, this study measured noise of each equipment and obtained new equations by comparing the measured noise data and the equation which is relation noise and distance. The new equations predict noise level at operators’ positions. Actran analysis is performed to obtain noise level at operators’ positions too. At last, the noise level at operators’ positions measured in real shelter system is compared with the noise level predicted the new equations and Actran analysis.

• 한국소음진동공학회논문집
• /
• 제15권8호
• /
• pp.939-944
• /
• 2005

In this paper, a sound quality index for the evaluation of the vehicle intake noise was developed through a correlation analysis of the objective measurement and the subjective evaluation. First, intake orifice noise was measured at the wide-open throttle sweep condition. And then, the acoustic transfer function between intake orifice noise and interior noise was measured. Simultaneously, subjective evaluation was carried out with a 10-scale score by 8 special engineers. The correlation analysis between the psychoacoustic parameters derived from the measurement and the subjective evaluation was performed. The most critical factor was determined and the corresponding sound quality index for intake noise was obtained from the multiple factor regression analysis method. Finally, the effectiveness of the proposed index was validated.