• Title/Summary/Keyword: Multipath Transmission

Search Result 270, Processing Time 0.026 seconds

Performance Evaluation of MC-DS-CDMA Transmission Technique using MRRC Antenna Scheme (MRRC 안테나 기법을 이용한 MC-DS-CDMA 전송방식의 성능 분석)

  • Choi, Seung-Kuk
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.14 no.4
    • /
    • pp.817-823
    • /
    • 2010
  • MC-DS-CDMA is technique where a single data symbol is transmitted at multiple subcarriers which are orthogonal to each other. With this technique, frequency diversity can be achieved. The performance of PSAM MC-DS-CDMA system with the application of MRRC antenna diversity is analyzed. The BER performance of this system over multipath fading environment is evaluated, considering the channel estimation error, carrier frequency offset, and the nonlinear high power amplifier.

Performance Analysis of Blind Channel Estimation for Precoded Multiuser Systems

  • Xu, Zhengyuan
    • Journal of Communications and Networks
    • /
    • v.4 no.3
    • /
    • pp.189-198
    • /
    • 2002
  • Precoder has been shown to be able to provide source diversity and design flexibility. In this paper we employ precoding techniques for block transmission based on a multirate filterbank structure. To accommodate multiuser communication with variable data rates, different precoders with corresponding coefficients and up/down sampling rates are used. However, due to unknown multipath distortion, different interferences may exist in the received data, such as multiuser interference, intersymbol interference and interblock interference. To estimate channel parameters for a desired user, we employ all structured signature waveforms associated with different symbols of that user and apply subspace techniques. Therefore better performance of channel estimator can be achieved than the conventional subspace method based only on the signature of the current symbol. The delay for that user can also be jointly estimated. Channel identifiability conditions and asymptotic channel estimation error are investigated in detail. Numerical examples are provided to justify the proposed method. gest either multicode (MC) or multiple processing gain (MPG) mechanism [2], while requiring data rates to be integral multiples of some basic low-rate. In order to support variable rate transmission however, a comprehensive scheme needs to be investigated.

A Comparisons of TCM Schemes with OFDM in Mobile Communication Channel (이동통신 채널에서 OFDM을 적용한 TCM방식 비교분석)

  • 박성호;조범준
    • Proceedings of the Korea Multimedia Society Conference
    • /
    • 2003.05b
    • /
    • pp.49-52
    • /
    • 2003
  • OFDM(Orthogonal Frequency Division Multiplexing) scheme can compensate for distortions caused by multipath delay spread and reduce the burst errors caused by the Doppler effect since OFDM signals have long symbol durations. However, OFDM is required to be improved for high speed data transmission and large capacity. Therefore, coding schemes should be combined with OFDM. In this paper, it was studied that the performance of OFDM transmission scheme was improved in mobile communication channel by applying TCM, which has advantages of error correction and bandwidth efficiency. Simulation was carried out for two TCM models with different code efficient length. By mapping two models to square 16QAM, the model with the code efficient length of 2 achieved 3dB better than the other for the BER of 10/sub -3/. In conclusion, if we want to achieve a better performance with TCNA in OFDM applications, we should select a TCM with larger code efficient length.

  • PDF

Improving the performance of Multipath TCP using Delay Alerted Path-blocking Scheduler in Heterogeneous Networks (이종 망에서의 지연경보 경로차단 스케줄러를 이용한 MPTCP성능 개선방안)

  • Kim, Min Sub;Lee, Jae Yong;Kim, Byung Chul
    • Journal of the Institute of Electronics and Information Engineers
    • /
    • v.54 no.2
    • /
    • pp.28-37
    • /
    • 2017
  • Multipath TCP (MPTCP), which is a layer 4 protocol that can get the reliability and the efficiency of the transmission by using multipath transfer, was standardized by the IETF. MPTCP provides superior performance when compared to a single TCP when used in a homogeneous network with similar network characteristics. However, MPTCP degrades performance when used in heterogeneous networks with different network characteristics. In this paper, we propose 'Delay-alerted path-blocking scheduler'. It measures the delay of each path and blocks the path with a long delay to reduce the order of packets in the receive buffer. If the duplicated packet is sent to the blocked path to measure the delay and the congestion on the blocking path is reduced, the blocked path is unblocked. For performance analysis, the proposed scheduler was implemented in the Linux kernel and improved performance was obtained in the test bed. We also confirmed that the proposed scheduler reduces the degradation of MPTCP performance in real wireless networks with heterogeneous path characteristics.

A Single-User ]deceiver using Pilot-Assisted Channel Equalizer for DS-CDMA Downlink (DS-CDMA 하향링크에서 파일럿지원 채널등화기를 이용한 단일사용자 수신기)

  • 남옥우;김재형;김응배
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.4 no.3
    • /
    • pp.661-669
    • /
    • 2000
  • DS-CDMA downlink distinguishes actual user by orthogonal spreading codes ,but its orthogonality may be lost by the multiple access interference(MAI) caused by the multipath channel. Therefore in this paper, we proposed the single-user receiver, which use linear channel equalizer to eliminate the interference due to multipath channel and to recover orthogonality and then use code-matched filter to detect transmitted data. Unlike existing research, which mainly assumed ideal channel information, we use pilot channel assisted methods that is a kind of transmission of a parallel reference method to estimate the channel coefficients. Especially we use guard symbols which are inserted periodically to estimate channel coefficients exactly without interference from user signal. The results show that we accepted an approximately ideal channel information and achieved excellent performance improvement using proposed receiver compared with the conventional receiver especially user populations are high.

  • PDF

Performance Analysis of Multicarrier Code Select CDMA System for PAPR Reduction in Multipath Channels

  • Ryu, Kwan-Woong;Jin, Jiyu;Park, Yong-Wan;Choi, Jeong-Hee
    • Journal of Communications and Networks
    • /
    • v.11 no.1
    • /
    • pp.11-19
    • /
    • 2009
  • Multicarrier direct sequence code division multiple access (MC DS-CDMA) is an attractive technique for achieving high data rate transmission. This is valid regardless of whether or not the potentially large peak-to-average power ratio (PAPR) is an important factor for its application. On the other hand, code select CDMA (CS-CDMA) is an attractive technique with constant amplitude transmission of multicode signal regardless of subchannels. This is achieved by introducing a code select method. In this paper, we propose a new multiple access scheme based on the combination of MC DS-CDMA and CS-CDMA. The proposed scheme, which we call MC CS-CDMA, includes as special cases the subclasses of MC DS-CDMA and CS-CDMA. This paper investigates the performance of these systems over a multipath frequency selective fading channel using a RAKE receiver with maximal ratio combiner. In addition, the PAPR of the proposed system is compared with that of both MC DS-CDMA and CS-CDMA. Simulation results demonstrate that the proposed system provides better PAPR reduction than MC DS-CDMA, at the expense of the complexity of the receiver and the number of available users. The numerical result demonstrates that the proposed system has better performance than MC DS-CDMA due to the increased processing gain and time diversity gain.

The automatic generation of MPTCP session keys using ECDH (MPTCP에서 ECDH를 이용한 세션 키 자동생성에 관한 연구)

  • Sun, Seol-hee;Kim, Eun-gi
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.20 no.10
    • /
    • pp.1912-1918
    • /
    • 2016
  • MPTCP(Multipath Transmission Control Protocol) is able to compose many TCP paths when two hosts connect and the data is able to be transported through these paths simultaneously. When a new path is added, the authentication between both hosts is necessary to check the validity of host. So, MPTCP exchanges a key when initiating an connection and makes a token by using this key for authentication. However the original MPTCP is vulnerable to MITM(Man In The Middle) attacks because the key is transported in clear text. Therefore, we applied a ECDH(Elliptic Curve Diffie-Hellman) key exchange algorithm to original MPTCP and replaced the original key to the ECDH public key. And, by generating the secret key after the public key exchanges, only two hosts is able to make the token using the secret key to add new subflow. Also, we designed and implemented a method supporting encryption and decryption of data using a shared secret key to apply confidentiality to original MPTCP.

DOA(Direction of Arrival) Estimation based Beamforming technique for VBeam Reception Performance Enhancement (VBeam 수신 성능 개선을 위한 입사각 추정 기반의 빔형성 알고리즘 연구)

  • Lee, Jae-Eun;Shim, Tae-Bo
    • Journal of the Institute of Electronics Engineers of Korea SP
    • /
    • v.47 no.5
    • /
    • pp.212-221
    • /
    • 2010
  • The bubbles could be created from multiple source in the surface of ocean. The bubbles which are created like this affect to the intensity and the sound speed of acoustic wave which are used from the ocean. From the research, it observed Reverberation from the sea surface, using Vbeam transmission and reception equipment that was a cross-shaped Array, from 2008 July 2nd to July 3rd at 4Km from the East Sea Mookho port. It is difficult to analyze data because the received signal has ambient noise and occurrence ISI(Inter Symbol Interference) for multipath. This paper remove that ambient noise and ISI using the directions of arrival beamforming and the filter and sum beamforming. After beamforming, a following DFE(Decision Feedback Equalizer) removes the remaining multipath components. Experimental results show that the proposed technique reduce the errors caused by ISI.

Performance Analysis for Optimization of the Wireless Local Loop System (WLL (Wireless Local Loop) 시스템의 최적화를 위한 성능 분석)

  • Hwang, Sang-Woo;Park, Doo-Yeong
    • The Journal of Engineering Research
    • /
    • v.3 no.1
    • /
    • pp.97-106
    • /
    • 1998
  • In this paper, we analyze the WLL systems with high chip rate, which virtually eliminates the multipath fading effects by appling space diversity functions. First, we found out the capacity of reverse link which resulted from performing computer simulation of the transmission and reception of the WLL systems to evaluate the performance of the WLL systems in real environment. Besides, we analyze the radio propagation medium and the link budget and from the results, made RCSU for providing of the AWGN multipath fading channel. This RCSU is produced to characterize the urban radio propagation medium in various environments. From the simulation results, diversity gains increase as depth of fading becomes deeper. We also confirm that the systems applied diversity reduce the effects of multipath fading phenomena which cause to degrade the performance of WLL systems, based on the results $E_b/N_o$ and BER curve.

  • PDF

A Channel Estimation Method for Multipath Feedback Interference Signal Cancellation of RF Repeaters (RF 중계기의 다중 궤환 간섭 신호 제거를 위한 채널 추정 방식)

  • Lee, Sang-Dae;Park, Jin;Sung, Won-Jin
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.33 no.2A
    • /
    • pp.98-106
    • /
    • 2008
  • To reduce the outage probability and to increase the transmission capacity, the importance of repeaters in cellular systems keeps increasing. Unlike optical repeaters which require wireline connections, RF repeaters are easy to install, have low limitations in location and also have a reduced operational expense such as the optical fiber maintenance cost. On the other hand, RF repeaters suffer the interference due to the feedback signals between the transmitter and receiver antennas, hence require an extra interference cancellation method when the amount of the feedback signal reduction by using the shielding is not sufficient. In this paper, a channel estimation method for two-path feedback interference signals in the ICS (Interference Cancellation System) repeaters using baseband signal processing is proposed and its performance is evaluated. When compared with the conventional method which estimates each multipath individually, the proposed method achieves 10 dB performance gain in terms of the normalized mean-squared-error.