• Journal of the Korean Ceramic Society
• /
• v.34 no.8
• /
• pp.908-913
• /
• 1997

Multilayer NbCxC1-x/Y2O3/Ti were sputter-coated on the alumina substrate, starting with a 0.7 ㎛ thick NbCxC1-x layer grown on substrate, followed by 0.7 ㎛ thick Y2O3 layer and 1 ㎛ thick Ti layer. To find out the optimum conditions for thickness uniformity and adhesion, sputtering works have been done with the variation of sputtering power and Ar pressure. After vacuum annealing at 950℃ and 1000℃, the thermal stability of the NbCxC1-x/Y2O3/Ti coated alumina substrates has been investigated by peel off test. The coating scheme didn't cause any debonded layer after an annealing at 950℃ for 3hrs. However, it was peeled off after annealing at 1000℃ for 3hr. It was found that the thermal stability of Al2O3/NbCxC1-x/Y2O3/Ti coating scheme changed with the NbCxC1-x composition.

• Proceedings of the KIEE Conference
• /
• 2006.10a
• /
• pp.123-124
• /
• 2006

The sandwiched PZT/$BaTiO_3$/PZT thick films were fabricated by two different methods thick films of the PZT by screen printing method on alumina substrateselectrodes with Pt, thin films of $BaTiO_3$ by the spin-coating method on the PZT thick films and once more thick films of the PZT by the screen printing method on the $BaTiO_3$ layer. The structural and the dielectric properties were investigated for effect of various stacking sequence of sol-gel prepared $BaTiO_3$ coating solution at interface of the PZT thick films, The insertion of BaTi03 interlayer yielded the PZT thick films with homogeneous and dense grain structure with the number of $BaTiO_3$ layers. The leakage current density of the $PZT/BaTiO_3-1$ film is less that $4.41{\times}10^{-9}A/cm^2$ at 5 V.

• Journal of the Korean Solar Energy Society
• /
• v.23 no.3
• /
• pp.81-91
• /
• 2003

본 연구에서는 복층으로 구성된 $WSio_2Al$ 금속절연체의 상세를 보여주고 있는데, 금속과 절연체의 합성물질은 태양 흡수율의 설계와 열적인 현상을 보여주기 위해 종종 사용된다. 금속의 접착기면 위에 얇은 복층 코팅으로 구성되는 디자인은 태양 스펙트럼의 파장권역에서 선택적 흡수를 위함이다. 본 연구는 태양 복사의 열성능 평가를 위해 금속과 절연체 필름의 방사율, 태양흡수율, 코팅순서, 미 반사층(AR)의 두께, 코팅 두께와 코팅 면수, 전체 코팅 두께 등에 대해 시뮬레이션 하였다. 그 결과 네 겹의 코팅설계에서 $Sio_2AR$ 75 nm 두께와 각각의 층에서 $0.5\sim0.7$의 가변 금속부분 구성이 가장 우수한 성능을 갖는 것으로 나타났다. 또한 시뮬레이션으로 금속과 절연체 합성물의 최적의 구성과 각각의 코팅 두께에 대한 예측이 가능했으며, 최대 태양흡수율은 0.94, 방사율은 0.115의 금속과 절연체의 합성물을 구성할 수 있었다.

• Korean Journal of Optics and Photonics
• /
• v.9 no.6
• /
• pp.380-384
• /
• 1998

As the development of ultrahigh power laser system, the laser mirrors must require high-resistant and effectively cooled. So, the study for the optical multilayer systems having large thermal diffusivity become important. In this study, we designed and fabricated two-layer anti-reflection (AR) optical coating samples, in different evaporation conditions of coating speeds (10, 20 $\AA$/s) and substrate temperatures (50, 100, 150, 20$0^{\circ}C$), using two dielectric materials $MgF_2$ and ZnS which have different refractive indices and measured the through-plane thermal diffusivity by using photoacoustic effect. The optical thicknesses of $MgF_2$ and ZnS layer were fixed as 5/4λ (λ=514.5nm) and λ, respectively, and the thermal diffusivity of the samples fabricated in the different conditions was obtained from the measured amplitude of photoacoustic signals by changing chopping frequency of $Ar^+$ layer beam. The results told us that the thermal diffusivity of the sample fabricated in the condition of 10 $\AA$/s and 15$0^{\circ}C$ showed the largest value.

• Nuclear Engineering and Technology
• /
• v.50 no.2
• /
• pp.229-236
• /
• 2018

Accident-tolerant fuels (ATFs) are currently of high interest to researchers in the nuclear industry and in governmental and international organizations. One widely studied accident-tolerant fuel concept is multilayer cladding (also known as coated cladding). This concept is based on a traditional Zr-based alloy (Zircaloy-4, M5, E110, ZIRLO etc.) serving as a substrate. Different protective materials are applied to the substrate surface by various techniques, thus enhancing the accident tolerance of the fuel. This study focuses on the results of testing of Zircaloy-4 coated with pure chromium metal using the cold spray (CS) technique. In comparison with other deposition methods, e.g., Physical vapor deposition (PVD), laser coating, or Chemical vapor deposition techniques (CVD), the CS technique is more cost efficient due to lower energy consumption and high deposition rates, making it more suitable for industry-scale production. The Cr-coated samples were tested at different conditions ($500^{\circ}C$ steam, $1200^{\circ}C$ steam, and Pressurized water reactor (PWR) pressurization test) and were precharacterized and postcharacterized by various techniques, such as scanning electron microscopy, Energy-dispersive X-ray spectroscopy (EDX), or nanoindentation; results are discussed. Results of the steady-state fuel performance simulations using the Bison code predicted the concept's feasibility. It is concluded that CS Cr coating has high potential benefits but requires further optimization and out-of-pile and in-pile testing.

• Journal of Sensor Science and Technology
• /
• v.31 no.4
• /
• pp.249-254
• /
• 2022

To achieve high-performance colloidal quantum dot light-emitting diodes (QD-LEDs), the use of a densely packed QD film is crucial to prevent the formation of leakage current pathways and increase in interface resistance. Spin coating is the most common method to deposit QDs; however, this method often produces pinholes that can act as short-circuit paths within devices. Since state-of-the-art QD-LEDs typically employ mono- or bi-layer QDs as an emissive layer because of their low conductivities, the use of a densely packed and pinhole-free QD film is essential. Herein, we introduce the Langmuir-Blodgett (LB) technique as a deposition method for the fabricate densely packed QD films in QD-LEDs. The LB technique successfully transfers a highly dense monolayer of QDs onto the substrate, and multilayer deposition is performed by repeating the transfer process. To validate the comparability of the LB technique with the standard QD-LED fabrication process, we fabricate and compare the performance of LB-based QD-LEDs to that of the spin-coating-based device. Owing to the non-destructiveness of the LB technique, the electroluminescence efficiency of the LB-based QD-LEDs is similar to that of the standard spin coating-based device. Thus, the LB technique is promising for use in optoelectronic applications.

• KSBB Journal
• /
• v.7 no.4
• /
• pp.278-283
• /
• 1992

Rat hepatocytes were isolated and cultured on the petri dishes treated with various coating materials. Untreated or collagen coated petri dish gave monolayer culture of hepatocyte and proteoglycan, dermatan sulfate, and BSA treated petri dish gave hemispheroid. The untreated Primaria petri dish gave spheroid type of hepatocyte, and heparin and hyaluronic acid treatment gave multilayers. To sustain high cell viability, monolayer cultured hepatocytes was more useful, while it was found that the hemispheroid or spheroid type hepatocytes was more active in the hepatic functions such as ammonia metabolism and albumin synthesis.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.119-119
• /
• 2003

탄화규소나 열분해 탄소는 고온 특성 및 화학적인 안정성 이 우수하여 단미 혹은 코팅재로로 소재의 성능을 향상시키기 위하여 에너지 관련 분야, 반도체 치구 분야, 방위산업 및 항공우주 분야와 원자력 분야에서 다양하게 사용된다. 특히 원자력 분야에서는 고온형 원자로의 노심 요소 부품으로 적용 및 개발을 고려하고 있으며, 대표적인 예로 수소생산용 초고온 가스냉각로의 코팅 핵연료 입자를 들 수 있다. 일반적으로 TRISO라 불리는 가스냉각로 핵연료는 구형 $UO_2$ kemel의 주변을 PyC-SiC -PyC의 삼중 코팅층으로 둘러싸는 구조를 하고 있으며, 이 코팅층들은 kernel물질이 분열하는 동안 발생되는 내부 기체 압력을 견디는 압력용기 역할과 기체나 금속 핵분열 생성물들을 가두는 확산 장벽 역할을 하게 된다. 본 연구에서는 구형의 $UO_2$대신 선행연구를 위하여 구형 ZrO$_2$를 이용하여 증착온도나 시간 및 입력기체비 등의 화학증착 변수로 조절하여 SiC 및 PyC을 코팅하고, 각 변수들에 의한 증착층의 거동을 고찰하고자 하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.4B
• /
• pp.391-399
• /
• 2001

In this paper, electromagnetic wave scattering from a bianisotropicaly coated cylinder is formulated by using wave functions for bianisotropic media and boundary-value method. The cross section of the cylinder is made of a conducting core, a lossless dielectric layer which is both electrically magnetically bianisotropic, and a bianisotropic impedance sheet and a different uniaxial bianisotrpic coating. The solutions to arbitrary polarization angles are presented in two-dimensional. This paper presents and exact solution to the problem of scattering by a long composite circular cylinder using the boundary method. The validity of this solution is verified by comparing numerical results with those in literature. The numerical results for various geometrical and electrical parameters on bistatic scattering cross-section are presented.

• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.2209-2210
• /
• 2006

In this paper, PZT(20/80) thick films were fabricated by the screen-printing method. And the PZT(80/20) coating solution was synthesized by the sol-gel method. PZT(20/80) thick films were screen-printed on the alumina substrates. PZT(80/20) thin film was spin-coaled on the PZT(20/80) thick films to obtain densification. And the structural and electrical properties of PZT thick films were investigated with variation of sintering temperature. The PZT specimen sintered at $650^{\circ}C$ showed good relative dielectric constant of 219 and dielectric loss of 2.45%. Also the remanent polarization and the coercive field wore 16.48 ${\mu}C/cm^2$ and 35.48kV/cm, respectively.