• Journal of Magnetics
• /
• 제20권3호
• /
• pp.322-329
• /
• 2015

This paper presents a new overlapped coilgun configuration to launch medium weight projectiles. The proposed configuration consists of a two-stage coilgun with overlapped coil covers with spacing between them. The theoretical operation of a multi-stage coilgun is introduced, and a transient simulation was conducted for projectile motion through the launcher by using a commercial transient finite element software, ANSOFT MAXWELL. The excitation circuit design for each coilgun is reported, and the results indicate that the overlapped configuration increased the exit velocity relative to a non-overlapped configuration. Different configurations in terms of the optimum length and switching time were attempted for the proposed structure, and all of these cases exhibited an increase in the exit velocity. The exit velocity tends to increase by 27.2% relative to that of a non-overlapped coilgun of the same length.

• Journal of Electrical Engineering and Technology
• /
• 제8권3호
• /
• pp.572-580
• /
• 2013

Power metering and monitoring system is a basic element of Smart Grid technology. This paper proposes a new Non-Intrusive Load Monitoring (NILM) method for a residential buildings sector using the measured total active power consumption. Home electrical appliances are classified by ON/OFF state models, Multi-state models, and Composite models according to their operational characteristics observed by experiments. In order to disaggregate the operation and the power consumption of each model, an algorithm which includes a switching function, a truth table matrix, and a matching process is presented. Typical profiles of each appliances and disaggregation results are shown and classified. To improve the accuracy, a Time Lagging (TL) algorithm and a Permanent-On model (PO) algorithm are additionally proposed. The method is validated as comparing the simulation results to the experimental ones with high accuracy.

• 대한기계학회논문집
• /
• 제17권7호
• /
• pp.1813-1822
• /
• 1993

An algorithm of fuzzy variable structrue control is proposed to design a closed loop fuel-injection system for the emission control of automotive gasoline engines. Fuzzy control is combined with sliding control at the switching boundary layer to improve the chattering of the stoichiometric air to fuel ratio. Multi-staged fuzzy rules are introduced to improve the adaptiveness of control system for the various operating conditions of engines, and a simplified technique of fuzzy inference is also adopted to improve the computational efficiency based on nonfuzzy micro-processors. The proposed method provides an effective way of engine controller design due to its hybrid structure satisfying the requirements of robustness and stability. The great potential of the fuzzy variable structure control is shown through a hardware-testing with an Intel 80C186 processor for controller and a typical engine-only model on an AD-100 computer.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2010년도 하계학술대회 논문집
• /
• pp.3-5
• /
• 2010

본 논문은 연료전지를 이용한 가정용 발전시스템의 계통 연계를 위한 3kW급 전력변환 시스템의 개발에 관한 것이다. 저전압 대전류 출력특성을 갖는 연료전지의 전류리플 최소화를 위해 멀티페이즈 컨버터를 적용한 DC/DC 승압 컨버터를 제안하고자 한다. 특히 고밀도 전력변환 시스템의 스위칭 손실 극소화를 위해 고효율 ZVS Soft-Switching 동작을 구현하였다. 또한 본 연구에서는 높은 승압비로 변환된 전압을 통해 계통운전 동작을 수행하기 위한 DC/AC 단상 인버터와 고효율 무결점 기능을 갖는 디지털 방식의 DSP를 적용한 제어기 개발도 병행하여 수행되었다. 제안하는 3kW급 멀티페이즈 컨버터 및 계통연계형 인버터의 Proto-Type을 제작하고 실험을 통해 본 방식의 타당성을 검증하였다.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2008년도 추계학술발표논문집
• /
• pp.227-230
• /
• 2008

본 논문에서는 MPEG-4 기반으로 다시점 동영상 재생을 위한 전송방법을 제안한다. 그리고 MP4 파일포맷을 분석하여 OSMO4에서 제공하는 MP4BOX를 이용해서 동영상을 MP4 파일로 변환한다. 기존의 MPEG4 플레이어는 다시점 동영상을 전송하기 위한 정보들이 부족하여 활용하지 못하지만, 새로운 객체 기술자와 BIFS 구조를 추가하여 OSMO4 플레이어에 입력되는 MP4 파일이 다시점 동영상임을 알 수 있게 하여 OSMO4에서 다시점 동영상 시점 전환이 가능하도록 한다. 실험은 여러 개의 영상에 대한 시점의 스위칭을 수행했으며, N개의 다시점 동영상으로도 확장이 가능함을 보여준다.

• 융합신호처리학회논문지
• /
• 제8권3호
• /
• pp.199-204
• /
• 2007

This paper presents design of interleave configured dc-dc converter for high power distributed power system applications. The multi channel interleaving buck converter with small inductance has proved to be suitable for micro-grid, requiring medium output voltages, high output currents and fast transient response. Integrated magnetic components are used to reduce the size of the converter and improve efficiency. Unlike conventional methods, the distributed approach requires no centralized control, automatically accommodates varying numbers of converter cells, and is highly tolerant of subsystem failures. A general methodology for achieving distributed interleaving is proposed, along with a specific implementation approach. The design and simulation verification of switching frequency 10 kHz system is presented with interleaved clocking of the converter cells. The simulation (simulated by PSIM 6.1) results corroborate the analytical predictions and demonstrate the tremendous benefits of the distributed interleaving approach.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 B
• /
• pp.440-442
• /
• 1998

In this paper, new sliding mode surfaces are proposed by defining novel virtual states. These sliding surfaces have nominal dynamics of an original system and makes it possible that the Sliding Mode Control(SMC) technique is used with the various types of controllers. Its design is based on the augmented system whose dynamics have m-th higher order than those of the original system where m is the number of inputs. The reaching Phase is removed by setting the initial virtual states which makes the initial switching functions equal to zero.

• 대한전자공학회논문지
• /
• 제27권1호
• /
• pp.10-19
• /
• 1990

A fault tolerant control system, in which a digital back-up controller system is added on the existing analog control system, is developed for enhancing reliability of boiler control system in power plant. The digital back-up controller system(DBCS) has a multi-processor structure with capabilities of fault diagnosis, back-up control, self test, and graphic monitoring. Specifically, switching mechanism composed of expandable modules is designed so that back-up controller takes over any faulty control loops and the number of back-up control loops is determined as that of simultaneous faults. A process simulator that simulates the boiler analog control system is developed for safety test and performance evaluation prior to real plant application. DBCS is installed at the Ulsan thermal power plant, and fault tolerant control performance is assured under the faults that some controller modules are pulled out.

• 한국경영과학회지
• /
• 제20권2호
• /
• pp.109-123
• /
• 1995

Weight of the factors to be considered in layout development with improvement-type heuristics is discussed in this paper. Determination of weight is especially important if it is designed to be used with an improvement-type heuristic. It is same as the value of variable coefficients in a multi-objective function as well as indices for departmental switching orders in the heuristic. Various weights are examined through computer simulation to verify whether the numerical values collected from machinery industries can be used as weights. And then a method to be used for searching an optimum or optimum-tending layout for machinery industries is presented using the weight.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2002년도 가을 학술발표논문집 Vol.29 No.2 (3)
• /
• pp.124-126
• /
• 2002

Voice over Internet Protocol(VoIP) is expected to be a major application on the Internet in the future This paper propose an approach to VoIP that uses Differentiated Service and Multi-protocol Label Switching(MPLS) to provide quantitative QoS guarantees over an IP network. An algorithm that determines QoS-constrained routes is proposed and a framework that uses such an algorithm for traffic engineering is outlined. the key component of this framework is a Centralize Resource Manager(CRM) responsible for monitoring and managing resources within the network and making all decisions to route／reroute traffic according to QoS requirement