• Journal of Magnetics
• /
• 제16권4호
• /
• pp.417-422
• /
• 2011

This paper presents the characteristics of PM eddy current loss and harmonic iron loss for PM step-skewed Interior Permanent Magnet Synchronous Motor (IPMSM) with concentrated windings and multi-layered PM under the running condition of maximum torque per ampere (MTPA) and flux-weakening control. In particular, PM eddy current loss and harmonic iron loss in IPMSM have been numerically computed with three-dimensional Finite Element Analysis (3D FEA), whereby IPMSM with concentrated windings and multi-layered PM has been designed to identify the optimized skew angle contributing to the reduced PM eddy current loss and torque ripples, while maintaining the required average torque. Furthermore, numerical investigation on PM eddy current loss and iron loss at MTPA and flux-weakening control has been carried-out in terms of PM step-skew.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1157-1158
• /
• 2006

Internally nitrided dilute W-Ti alloy specimens having a heavily deformed surface microstructure were prepared by a multi-step internal nitriding at 1573-2073 K. Primary nitriding below their recrystallization temperature induced a precipitation of ultrafine TiN particles. After secondary and tertiary nitriding, those precipitates grew into rod-like TiN with a length of 20-60 nm. The recrystallization temperature after nitriding was elevated above 2073 K. The yield strength at 1773 K obtained from nitrided W-0.5 mass% Ti alloy was about 5 times as large as that of the recrystallized specimen. DBTT of the nitrided alloys was about 373 K.

• Journal of Information Science Theory and Practice
• /
• 제2권2호
• /
• pp.16-32
• /
• 2014

As Topic Modeling has been applied in increasingly various domains, the difficulty in naming and characterizing topics also has been recognized more. This study, therefore, explores an approach of combining text mining with network analysis in a multi-step approach. The concept of synchronization was applied to re-assign the top author keywords in more than one topic category, in order to improve the visibility of the topic-author keyword network, and to increase the topical cohesion in each topic. The suggested approach was applied using 16,548 articles with 2,881 unique author keywords in construction and building engineering indexed by KSCI. As a result, it was revealed that the combined approach could improve both the visibility of the topic-author keyword map and topical cohesion in most of the detected topic categories. There should be more cases of applying the approach in various domains for generalization and advancement of the approach. Also, more sophisticated evaluation methods should also be necessary to develop the suggested approach.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 ITC-CSCC -1
• /
• pp.474-477
• /
• 2000

This paper presents an algorithm for simplification of 3D triangular mesh data, based on mesh simplification. The proposed algorithm is first attempt to segment the entire mesh into several parts using the orientation of triangles. Then simplification algorithm is applied to each segment that has similar geometric property. The proposed two step multi-resolution modeling scheme would yield better performance then conventional algorithm like edge collapse technique, since the segmentation step can give global information on the input shape. The experimental results show that the proposed algorithm is performed efficiently.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.307-308
• /
• 2007

At present, there are unnecessary electrical consumes and a lot of fuel-losses by the vaporized gas due to the rising of fuel temperature because the fuel pump of the fuel supply system rotates regularly regardless to the driving condition. In this paper, we designed the multi-step controller for controlling fuel pump to supply fuel according to RPM of each moment by measuring the real time RPM of the engine at ECU of the vehicle. Also, it can judge the existence or nonexistence of disorder by measuring the pressure of the fuel supply line, in case of abnormal state, it can supply the fuel intelligently by changing the mode to self-compensation mode.

• Journal of Power Electronics
• /
• 제3권1호
• /
• pp.24-32
• /
• 2003

The commutation and control in matrix converters is more complicated as in voltage source converters. Natural freewheeling paths do not exist and the theoretic absent storage elements result in a direct coupled system of load and line currents as well as voltages. The paper offers an overview about staggered commutation and control policies in matrix converters. Based on the knowledge about load current direction and the signs of the line to line input voltages different multi-step commutation policies were derived. This paper examines the application of that policies in the case of space vector modulation and direct control methods with the focus on the resulting effects to the reference output voltage deviation.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.251-254
• /
• 1999

A new multi-seeding process for the growth of YBa$_2$Cu$_3$Oxx single crystals was developed. This process introduces an additional heating step to peritectic temperature and a subsequent slow cooling step to the growth temperature following the point when the crystals contacted. The crystal growth was resumed thereafter. The results obtained with this new process were compared with those of the conventional growth process, in which materials were only kept at the growth temperature. It was observed that the liquid phase between crystals were almost completely eliminated, but that Y2ll grains were grown during this new process. There was no significant improvement in trapped magnetic field over the conventional process, which is believed to be due to the cracks generated during the oxygen heat treatment or to the growth of YBa$_2$Cu$_3$Ox grains.

• International Journal of Control, Automation, and Systems
• /
• 제6권1호
• /
• pp.135-141
• /
• 2008

A new approach to $H_{\infty}$ multi-step prediction is developed by applying the innovation analysis theory. Although the predictor is derived by resorting to state augmentation, nevertheless, it is completely different from the previous works with state augmentation. The augmented state here is considered just as a theoretical mathematic tool for deriving the estimator. A distributed algorithm for the Riccati equation of the augmented system is presented. By using the reorganized innovation analysis, calculation of the estimator does not require any augmentation. A numerical example demonstrates the effect in reducing computing burden.

• Journal of Electrical Engineering and Technology
• /
• 제9권2호
• /
• pp.471-477
• /
• 2014

The novel permanent magnetic actuator (PMA) and its optimal design method were proposed in this paper. The proposed PMA is referred to as the separated permanent magnetic actuator (SPMA) and significantly superior in terms of its cost and performance level over a conventional PMA. The proposed optimal design method uses the evolutionary strategy algorithm (ESA), the kriging meta-model (KMM), and the multi-step optimization. The KMM can compensate the slow convergence of the ESA. The proposed multi-step optimization process, which separates the independent variables, can decrease time and increase the reliability for the optimal design result. Briefly, the optimization time and the poor reliability of the optimum are mitigated by the proposed optimization method.

• 한국수학교육학회지시리즈B:순수및응용수학
• /
• 제20권4호
• /
• pp.277-286
• /
• 2013

In this paper, we suggest and analyze a family of multi-step iterative methods which do not involve the high-order differentials of the function for solving nonlinear equations using a different type of decomposition (mainly due to Noor and Noor [15]). We also discuss the convergence of the new proposed methods. Several numerical examples are given to illustrate the efficiency and the performance of the new iterative method. Our results can be considered as an improvement and refinement of the previous results.