• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.42 no.1
• /
• pp.151-157
• /
• 2019

This study is about the process capability index (PCI). In this study, we introduce several indices including the index $C_{PR}$ and present the characteristics of the $C_{PR}$ as well as its validity. The difference between the other indices and the $C_{PR}$ is the way we use to estimate the standard deviation. Calculating the index, most indices use sample standard deviation while the index $C_{PR}$ uses range R. The sample standard deviation is generally a better estimator than the range R. But in the case of the panel process, the $C_{PR}$ has more consistency than the other indices at the point of non-conforming ratio which is an important term in quality control. The reason why the $C_{PR}$ using the range has better consistency is explained by introducing the concept of 'flatness ratio'. At least one million cells are present in one panel, so we can't inspect all of them. In estimating the PCI, it is necessary to consider the inspection cost together with the consistency. Even though we want smaller sample size at the point of inspection cost, the small sample size makes the PCI unreliable. There is 'trade off' between the inspection cost and the accuracy of the PCI. Therefore, we should obtain as large a sample size as possible under the allowed inspection cost. In order for $C_{PR}$ to be used throughout the industry, it is necessary to analyze the characteristics of the $C_{PR}$. Because the $C_{PR}$ is a kind of index including subgroup concept, the analysis should be done at the point of sample size of the subgroup. We present numerical analysis results of $C_{PR}$ by the data from the random number generating method. In this study, we also show the difference between the $C_{PR}$ using the range and the $C_P$ which is a representative index using the sample standard deviation. Regression analysis was used for the numerical analysis of the sample data. In addition, residual analysis and equal variance analysis was also conducted.

• The Journal of the Acoustical Society of Korea
• /
• v.37 no.2
• /
• pp.99-109
• /
• 2018

The precision of the vibration-sensors, contact or non-contact types, is usually satisfactory for the practical measurement applications, but a sensor is confined to the measurement of a point or a direction. Although the precision and frequency span of the low-cost camera are inferior to these sensors, it has the merits in the cost and in the capability of simultaneous measurement of a large vibrating area. Furthermore, a camera can measure multi-degrees-of-freedom of a vibrating object simultaneously. In this study, the calibration method and the dynamic characteristics of the low-cost machine vision camera as a sensor are studied with a demonstrating example of the two-dimensional vibration of a cantilever beam. The planar image of the camera shot reveals two rectilinear and one rotational motion. The rectilinear vibration motion of a single point is first measured using a camera and the camera is experimentally calibrated by calculating error referencing the LDV (Laser Doppler Vibrometer) measurement. Then, by measuring the motion of multiple points at once, the rotational vibration motion and the whole vibration motion of the cantilever beam are measured. The whole vibration motion of the cantilever beam is analyzed both in time and frequency domain.

• Journal of Sasang Constitution and Immune Medicine
• /
• v.20 no.3
• /
• pp.70-81
• /
• 2008

1. Objective Recently we have known 'First Impression' is the major factor to check the review point for the classification of sasangin. And we want to find out the objected data contribute to dignosis of female sasang constitution using Sasangins Face. 2. Methods We analysed the datum collected by multi-center researchers in 2007-2008. And this study analysed the datum of the measurement of the face by 3D-AFRA (3-Dimensional Automatic Face Recognition Apparatus) and the items of impression by SDQ. We used chi-square test to define the relationship between the item and sasang constitutions. We used independent samples t - test with classifying measuring variables of the face. 3. Results and Conclusion We put out specific female sasangin's constitutional measuring variables of face. The measuring variables of count is Taeyangin 30point, Soyangin 15point, Taeumin 32point, Soeumin 21point. There is the need to accumulate more accurate pictures about sasangin's external shape.

• Journal of Distribution Science
• /
• v.15 no.1
• /
• pp.51-56
• /
• 2017

Purpose - The study verified the effects of consumers' knowledge perception upon word-of-mouth intention and purchase intention of consumers who were exposed to a lot of information, and examined consumer's behavior from multi-dimensional points of view. Research design, data, and methodology - The study conducted the test of difference between consumer's cognition on importance and satisfaction of HMR product by gap of HMR (Home Meal Replacement) product for IPA analysis. The consumer's reliability and words-of-mouth were measured by the questionnaire method with 4 questions according to Likert 7-point scale. Conversion into z-score removed the difference of variables. Results - The causal relation model for importance, satisfaction and gap, not relying upon multi-dimensional scaling and others, could construct causal relation model to give implications. Difference (d) of the products could lessen consumer's reliability to increase consumer's knowledge perception, word-of-mouth intention, knowledge perception, and purchase intention. Therefore, enterprises should make an effort to lessen consumers' complaint for the products and to elevate consumers' reliability. Enterprises also try to give consumers exact information and to promote purchase intention. Conclusions - Difference (d) of consumers' complaint and/or disappointment decreased consumers' reliability to increase knowledge perception. Enterprises should supply consumers with products according to their requirements to minimize the gap and to give them proper information.

• Proceedings of the KSRS Conference
• /
• v.1
• /
• pp.372-375
• /
• 2006

The MSC is a high resolution multi-spectral camera system which is mounted on the KOMPSAT-II satellite. The electro-optic camera system has a refocusing mechanism which can be used in-orbit by ground commands. By adjusting locations of some elements in optics, the system can be focused precisely. The focus mechanism in MSC is implemented with stepper motor and potentiometer. By reading the value of the potentiometer, rough position of the motor can be understood. The exact location of the motor can not be acquired because the information from the potentiometer can not be so accurate. However, before and after certain events of the satellite, like a satellite launch, the direction of the movement or order of the magnitude of the movement can be understood. In this paper, the trend analysis of the focus motor position during the ground test phase is introduced. This result can be used as basic information for the focus calibration after launch. By studying the long term trend, deviation from the best focal point can be understood. The positions of the focus motors after launch are also compared.

• Journal of Institute of Control, Robotics and Systems
• /
• v.4 no.4
• /
• pp.487-493
• /
• 1998

Camera calibration is the process of determining the coordinate relationship between a camera image and its real world space. Accurate calibration of a camera is necessary for the applications that involve quantitative measurement of camera images. However, if the camera plane is parallel or near parallel to the calibration board on which 2 dimensional objects are defined(this is called "ill-conditioned"), existing solution procedures are not well applied. In this paper, we propose a neural network-based approach to camera calibration for 2D images formed by a mono-camera or a pair of cameras. Multi-layer perceptrons are developed to transform the coordinates of each image point to the world coordinates. The validity of the approach is tested with data points which cover the whole 2D space concerned. Experimental results for both mono-camera and stereo-camera cases indicate that the proposed approach is comparable to Tsai's method［8］. Especially for the stereo camera case, the approach works better than the Tsai's method as the angle between the camera optical axis and the Z-axis increases. Therefore, we believe the approach could be an alternative solution procedure for the ill -conditioned camera calibration.libration.

• The Journal of Asian Finance, Economics and Business
• /
• v.6 no.1
• /
• pp.149-158
• /
• 2019

Due to the rapid development of IT (information technology) and internet, products become smart and able to collect, process and produce information and can think of themselves to provide better service to consumers. However, research on the characteristics of smart product is still sparse. In this paper, we report the systemic development of a scale to measure the perceived product smartness associated with smart product. To develop product smartness scale, this study follows systemic scale development processes of item generation, item reduction, scale validation, reliability and validity test consequently. And, after acquiring a large amount of qualitative interview data asking the definition of smart product, we add a unique process to reduce the initial items using both a text mining method using 'r' s/w and traditional reliability and validity tests including factor analysis. Based on an initial qualitative inquiry and subsequent quantitative survey, an eight-factor scale of product smartness is developed. The eight factors are multi-functionality, human-like touch, ability to cooperate, autonomy, situatedness, network connectivity, integrity, and learning capability consequently. Results from Korean samples support the proposed measures of product smartness in terms of reliability, validity, and dimensionality. Implications and directions for further study are discussed. The developed scale offers important theoretical and pragmatic implications for researchers and practitioners.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.6
• /
• pp.109-114
• /
• 2013

The biological active points (BAP) are known as low resistance spots or good electro-permeable points. In this paper, a new method for BAP detection using the bio-impedance measurement system based on the adaptive frequency tracking filter (AFTF) and the transition event detector is presented. Also, the microcontroller process continuous time demodulation of the modulated signal by multi frequency components using the AFTF. The transition event detector based on the phase space method is applied about each frequency using the BAP equivalent model which is proposed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.3 s.174
• /
• pp.761-768
• /
• 2000

In order to investigate how the fatigue damage effects on the critical properties of superconductor, a fatigue test at room temperature and an Ic measurement test at 4.2K were carried out in this study, respectively, using a 9 strand Cu-Ni/NbTi/Cu composite cable. Through the fatigue test of a 9 strand Cu-NUNbTi/Cu composite cable, a conventional S-N curve was plotted even though there was a possibility of fretting among strands. It was found that the maximum stress corresponding to the inflection point on the S-N curve obtained was nearly the same value as the yielding strength of cable obtained from the static tensile test. However, the effect of cabling in multi-strands superconducting cable on the fatigue strength was not noticeable. The critical current(Ic) measurement was carried out at 4.2K in a NbTi strand out of the fatigued cable. It showed a degradation of lc at high stress amplitude regions over 380NTa, and the degradation became significant as the applied stress amplitude increased.

• Journal of Radiation Industry
• /
• v.17 no.4
• /
• pp.359-367
• /
• 2023

In this study, the function and purpose of the disposal cover, which is an engineering barrier installed to isolate the disposal vault of the near-surface disposal facility for radioactive waste from natural/man-made intrusion, and the design details of the demonstration facility for performance verification were described. The Demonstration facility was designed in a partially divided form to secure the efficiency of measurement while being the same as the actual size of the surface disposal facility to be built in the Intermediate & low-level radioactive waste disposal site of the Korea Radioactive Waste Agency (KORAD). The instruments used for measurement consist of a multi-point thermometer, FDR (Frequency Domain Reflectometry) sensor, inclinometer, acoustic sensor, flow meter, and meteorological observer. It is used as input data for the monitoring system. The 3D monitoring system was composed of 5 layers using the e-government standard framework, and was developed based on 4 components: screen, control module, service module, and DBIO(DataBase Input Output) module, and connected them to system operation. The monitoring system can provide real-time information on physical changes in the demonstration facility through the collection, analysis, storage, and visualization processes.