• Journal of electromagnetic engineering and science
• /
• v.11 no.3
• /
• pp.201-206
• /
• 2011

This paper presents a miniaturized epsilon negative (ENG) zeroth-order resonance (ZOR) patch antenna with an improved bandwidth. The miniaturization and the broad bandwidth of the ENG ZOR patch antenna are achieved by using a meandered via and a high permeability substrate instead of a straight via and a dielectric substrate. The use of a meandered via allows miniaturization of the ENG ZOR patch antenna without narrowing the bandwidth. The use of a high permeability substrate allows further miniaturization of the ENG ZOR patch antenna and improvement of the bandwidth. A high permeability substrate consisting of a multi-layered substrate is designed to have a small material loss. The antenna (kr=0.32) has a 10 dB fractional bandwidth of ~1 %, which is 1.74 times as broad as that of an antenna with a dielectric substrate.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.13 no.4
• /
• pp.300-307
• /
• 2003

This paper presents the multi-mode noise reduction of smart panels of which passive piezoelectric shunt damping is introduced. For the piezoelectric shunt damping, a passive shunt circuit composed of inductors and a load resistor is connected to the piezoelectric patch mounted on the panel structure. An electrical impedance model is introduced for the system based on the measured electrical impedance, and the criteria for maximum energy dissipation at the shunt circuit is used to find the optimal shunt parameters. For multi-mode shunt damping, the shunt circuit is modified by the introduction of a block circuit. Also the optimal location of the piezoelectric patch is studied by finite element analysis in order to cause the maximum admittance from the patch for each mode of the structure. An acoustic test is performed for the panels and a remarkable noise reduction is obtained in multiple modes of the panel structure.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2003.05b
• /
• pp.492-498
• /
• 2003

본 논문에서는 실사와 같은 사실적인 3차원 Facial Model 제작을 위해 해부학 접근을 통한 근육기반의 자연스러운 Facial Modeling 제작을 연구하였다 한국인 기본형 얼굴을 연구 대상으로 선정하여 안면근육 비례를 분석한 후 Multi-patch Surface Modeling 방법을 적용하며 제작하였다. 이 방법에는 통계적 분석기법 중 L/sub 27/(3/sup 13/) 3수준계 직교배열표를 이용하여 검증하였다. 본 연구를 통하여 Facial Model 제작 시 최소의 UV spans 수로 최대 시각화 즉, 원본의 형상을 최대한 유지하면서 작업시간과 Rendering 시간 단축 및 Data 용량을 줄일 수 있는 Modeling 방법을 제안하였고, 향후 자연스런 Facial Animation 제작 및 연구에도 많은 도움이 될 것으로 기대된다.

• Journal of KIISE:Software and Applications
• /
• v.37 no.4
• /
• pp.264-272
• /
• 2010

Example-based super resolution is a method to restore a high resolution image from low resolution images through training and retrieval of image patches. It is not only good in its performance but also available for a single frame low-resolution image. However, its time complexity is very high because it requires lots of comparisons to retrieve image patches in restoration process. In order to improve the restoration speed, an efficient patch retrieval algorithm is essential. In this paper, we applied various high-dimensional feature retrieval methods, available for the patch retrieval, to a practical example-based super resolution system and compared their speed. As well, we propose to apply the multi-phase candidate reduction approach to the patch retrieval process, which was successfully applied in character recognition fields but not used for the super resolution. In the experiments, LSH was the fastest among conventional methods. The multi-phase candidate reduction method, proposed in this paper, was even faster than LSH: For $1024{\times}1024$ images, it was 3.12 times faster than LSH.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.773-776
• /
• 1998

In this paper, we propose an efficient multi-view images coding algorithm which finds the optimal texture from the restricted number of multi-view images. The X-Y plane of the normalized object space is divided into triangular patches. The depth value of the node is determined by applying the block based disparity compensation method and then the texture of the each patch is extracted by applying the affine transformation patch is extracted by applying the affine transformation based disparity compensation method to the multi-view images. We restricted the number of images contributed to determining the texture comapred to traditional methods which use all the multi-view images in the texture extraction. Experimental results show that the SNR of images encoded by the proposed algorithm is better than that of imaes encoded by the traditional method by the amount about 0.2dB for the test sets of multi-view images called dragon, kid, city and santa. The recovered images from the encoded data by the proposed method show the better visual images than the recovered images from the encoded data by the traditional methods.

• Structural Engineering and Mechanics
• /
• v.58 no.2
• /
• pp.301-326
• /
• 2016

An optimization method of patch shape was developed in this study, in order to improve repair of cracked plates. It aimed to minimize three objectives: stress intensity factor, patch volume and shear stresses in the adhesive film. The choice of these objectives ensures improving crack repair, gaining mass and enhancing the adhesion durability between the fractured plate and the composite patch. This was a multi-objective optimization combined with Finite elements calculations to find out the best distribution of patch height with respect to its width. The implementation of the method identified families of optimal shapes with specific geometric features around the crack tip and at the horizontal end of the patch. Considerable mass gain was achieved while improving the repair efficiency and keeping the adhesive shear stress at low levels.

• Smart Structures and Systems
• /
• v.12 no.5
• /
• pp.523-545
• /
• 2013

Piezoelectric and dielectric behaviors of a piezoceramic patch adhesively centered on a carbon composite plate are identified using a robust multi-objective optimization procedure. For this purpose, the patch piezoelectric stress coupling and blocked dielectric constants are automatically evaluated for a wide frequency range and for the different identifiable behaviors. Latters' symmetry conditions are coded in the design plans serving for response surface methodology-based sensitivity analysis and meta-modeling. The identified constants result from the measured and computed open-circuit frequencies deviations minimization by a genetic algorithm that uses meta-model estimated frequencies. Present investigations show that the bonded piezoceramic patch has effective three-dimensional (3D) orthotropic piezoelectric and dielectric behaviors. Besides, the sensitivity analysis indicates that four constants, from eight, dominate the 3D orthotropic behavior, and that the analyses can be reduced to the electromechanically coupled modes only; therefore, in this case, and if only the dominated parameters are optimized while the others keep their nominal values, the resulting piezoelectric and dielectric behaviors are found to be transverse-isotropic. These results can help designing piezoceramics smart composites for various applications like noise, vibration, shape, and health control.

• The Journal of the Korea Contents Association
• /
• v.6 no.2
• /
• pp.99-104
• /
• 2006

This paper proposed a method to design the offset slotted rectangular microstrip patch antenna which can be used for GPS antenna. The multi-port connection method and the desegmentation technique had been used to analyze !he characteristics of this antenna. To reduce a size of this antenna, a dielectric substrate with a high permittivity($\varepsilon_{\gamma}$=10.2) was used and a offset rectangular slot was inserted in the microstrip patch antenna. The dimension of a manufactured antenna is $20\times30\times1.27$[mm]. Accordingly this small antenna can be used directly GPS antenna or cellular phone.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.5
• /
• pp.81-86
• /
• 2011

In this paper, fractal microstrip patch antenna in a semicircle, by designing a multi-resonant antenna was improved by bandwidth issues, including the IEEE 802.11 wireless LAN and IEEE802.16e-band mobile WiMax specification both of which can contain non-directional antenna design and measured characteristics of the antenna for multi-resonant resonant frequency, impedance matching, radiation pattern, brilliantly polarity and multiple independent frequencies that can be controlled to meet the three semicircular wireless communications by inserting fractal patch antenna was designed.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.10
• /
• pp.3642-3667
• /
• 2021

Texture synthesis technology has the advantages of repairing texture and structure at the same time. However, during the filling process, the size of the patch is fixed, and the content of the filling is not fully considered. In order to be able to adaptively change the patch size, we used the exemplar-based inpainting technique as the test algorithm, considering the image structure and texture, calculated the image structure patch size and texture patch size, and comprehensively determined the image patch size. This can adaptively change the patch size according to the filling content. In addition, we use multi-layer images to calculate the priority, so that the order of image repair was more stable. The proposed repair algorithm is compared with other image repair algorithms. The experimental results showed that the proposed adaptive image repair algorithm can better repair the texture and structure of the image, which proved the effectiveness of the proposed algorithm.