Structural Engineering and Mechanics

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

New optimization method of patch shape to improve the effectiveness of cracked plates repair

  • Bouchiba, Mohamed S. (Department of Mechanical Engineering, University of Sidi Bel Abbes) ;
  • Serier, Boualem (Department of Mechanical Engineering, University of Sidi Bel Abbes)
  • Received : 2015.11.07
  • Accepted : 2016.01.26
  • Published : 2016.04.25
⟨ Previous Next ⟩

Abstract

An optimization method of patch shape was developed in this study, in order to improve repair of cracked plates. It aimed to minimize three objectives: stress intensity factor, patch volume and shear stresses in the adhesive film. The choice of these objectives ensures improving crack repair, gaining mass and enhancing the adhesion durability between the fractured plate and the composite patch. This was a multi-objective optimization combined with Finite elements calculations to find out the best distribution of patch height with respect to its width. The implementation of the method identified families of optimal shapes with specific geometric features around the crack tip and at the horizontal end of the patch. Considerable mass gain was achieved while improving the repair efficiency and keeping the adhesive shear stress at low levels.

Keywords

References

  1. ABAQUS (2007), ABAQUS Standard/User's Manual, Version 6.5, Hibbit Karlsson & Sorensen, Inc, Pawtucket, RI, USA.
  2. Achour, T., Bachir Bouiadjra, B. and Serier, B. (2003), "Numerical analysis of the performances of the bonded composite patch for reducing stress concentration and repairing cracks at notch", Comput. Mater. Sci., 28, 41-48. https://doi.org/10.1016/S0927-0256(03)00054-5
  3. Baker, A., Rose, L.R.F. and Jones, R. (2002), Advances in the Bonded Composite Repair of Metallic Aircraft Structure, Volume 1, Elsevier, Kidlington, Oxford, UK.
  4. Belhouari, M., Bachir Bouidjra, B., Megueni, A. and Kaddouri, K. (2004), "Comparison of double and single bonded repairs to symmetric composite structures: a numerical analysis", Compos. Struct., 65, 47-53. https://doi.org/10.1016/j.compstruct.2003.10.005
  5. Brighenti, R., Carpinteri, A. and Vantadori, S. (2006), "A genetic algorithm applied to optimisation of patch repairs for cracked plates", Comput. Meth. Appl. Mech. Eng., 196, 466-475. https://doi.org/10.1016/j.cma.2006.07.004
  6. Brighenti, R. (2007), "Patch repair design optimisation for fracture and fatigue improvements of cracked plates", Int. J. Solid. Struct., 44, 1115-1131. https://doi.org/10.1016/j.ijsolstr.2006.06.006
  7. Deb, K. (2001), Multi-objective Optimization using Evolutionary Algorithms, John Wiley & Sons Ltd, England, UK.
  8. De Boor, C. (2001), Practical Guide to Splines, Springer-Verlag, New York, Inc.
  9. Gu, L., Ram, A., Kasavajhala, M. and Zhao, S. (2011), "Finite element analysis of cracks in aging aircraft structures with bonded composite-patch repairs", Compos. Part B, 42, 505-510. https://doi.org/10.1016/j.compositesb.2010.11.014
  10. Hauschild, M. and Pelikan, M. (2001), "An introduction and survey of estimation of distribution algorithms", Swarm Evol. Comput., 1, 111-128.
  11. Jamal-Omidi, M., Falah, M. and Taherifar, D. (2014), "3-D fracture analysis of cracked aluminum plates repaired with single and double composite patches using XFEM", Struct. Eng. Mech., 50(4), 525-539. https://doi.org/10.12989/sem.2014.50.4.525
  12. Kaddouri, K., Ouinas, D. and Bachir Bouiadjra, B. (2008), "FE analysis of the behaviour of octagonal bonded composite repair in aircraft structures", Comput. Mater. Sci., 43, 1109-1111. https://doi.org/10.1016/j.commatsci.2008.03.003
  13. Kashfuddoja, M. and Ramji, M. (2014), "Design of optimum patch shape and size for bonded repair on damaged Carbon fibre reinforced polymer panels", Mater. Des., 54, 174-183. https://doi.org/10.1016/j.matdes.2013.08.043
  14. Kumar, M.A. and Hakeem, S.A. (2000), "Optimum design of symmetric composite patch repair to centre cracked metallic sheet", Compos. Struct., 49, 285-292. https://doi.org/10.1016/S0263-8223(00)00005-2
  15. Mhamdia, R., Serier, B., Bachir Bouiadjra, B. and Belhouari, M. (2012), "Numerical analysis of the patch shape effects on the performances of bonded composite repair in aircraft structures", Compos. Part B, 43, 391-397. https://doi.org/10.1016/j.compositesb.2011.08.047
  16. Mokadem, S., Bachir Bouiadjra, B., Mechab, B. and Kaddouri, K. (2015), "Elastic-plastic analysis of the J integral for repaired cracks in plates", Adv. Mater. Res., 4(2), 87-96. https://doi.org/10.12989/amr.2015.4.2.087
  17. Neapolitan, R.E. (2004), Learning Bayesian Networks, Pearson Prentice Hall.
  18. Papanikos, P., Tserpes, K.I. and Pantelakis, S. (2007), "Initiation and progression of composite patch debonding in adhesively repaired cracked metallic sheets", Compos. Struct., 81, 303-311. https://doi.org/10.1016/j.compstruct.2006.08.022
  19. Ramji, M., Srilakshmi, R. and Prakash, M.B. (2013), "Towards optimization of patch shape on the performance of bonded composite repair using FEM", Compos. Part B, 45, 710-720. https://doi.org/10.1016/j.compositesb.2012.07.049
  20. Shiuh-Chuan, H. and Chao, M. (2011), "Adhesively bonded patch repair of composite laminates", J. Adhes. Sci. Tech., 25(18), 2569-2585. https://doi.org/10.1163/016942411X580234
  21. Tsai, G. and Shen, S.B. (2004), "Fatigue analysis of cracked thick aluminum plate bonded with composite patches", Compos. Struct., 4, 79-90.

Cited by

  1. Geometrical parameters optimizations of scarf and double scarf bounded joint vol.5, pp.3, 2016, https://doi.org/10.12989/aas.2018.5.3.401
  2. Study of buckling stability of cracked plates under uniaxial compression using singular FEM vol.69, pp.4, 2016, https://doi.org/10.12989/sem.2019.69.4.417
  3. Performance assessment and optimization of hybrid composite patch repair of aircraft structure vol.16, pp.5, 2016, https://doi.org/10.1108/mmms-03-2019-0052
  4. Numerical Analysis of the Bonded Composite Shape Effects under Thermal Loading in Aircraft Structures vol.1167, pp.None, 2016, https://doi.org/10.4028/www.scientific.net/amr.1167.1