• 한국표면공학회지
• /
• 제45권1호
• /
• pp.43-52
• /
• 2012

Recently, it has been developed for Eco-environment, Super light, Multi-functional nano materials. As needed mobile parts in Smart phone or TV, computer, information communication for high pass signal, multi-function, Magnetic thin film materials have been developed. As last, magnetic powder, sintered and sputtering parts were thick and low purity than electroplating layer, low pass signal and noise were resulted, vibrated TV screen. Because chemical complex temperature was high and ununiform surface layer, it has been very difficult for data pass in High Frequency (GHz) area. Large capacity data pass is used to GHz. Above GHz, signal pass velocity is dependent on Skin Effect of surface layer. If surface layer is thick or ununiform, attachment is poor, low pass signal and cross talk, noise are produced and leaked. It has been reported technical trend of Electrochemically plating and Surface treatment of Metal, Polymer, Ceramic etc. by dispersion/complex for Multi functional nano-magnetic material in this paper.

• 한국주거학회논문집
• /
• 제11권1호
• /
• pp.171-181
• /
• 2000

The purpose of the resent research is to investigate the characteristics of sound insulation at the circular voided concrete slab in the multi-housing. In order to do this research, the method for field measurement of floor impact sound level was used following the Korea Standard F2810-1996. For the multi-housing, three kinds of circular voided concrete slabs are used to measure the characteristics of sound insulation.The results are as follows; 1.The main factor affecting the characteristics of sound insulation at the circular voided concrete slab in the multi-housing is sound-absorbing materials in the circular tube. 2. The main factor to effect the difference of sound pressure level is circular tube in the concrete slab. 3. The forms of circular tubes effect the characteristics of sound insulation at the circular tube. 4. Sound Pressure Level resulting from the piping direction of circular tubes in little different to octave band level.More study will be needed about the depth and distance of sound insulation materials, and the components of sound insulation materials for the multi-housing.

• 전기학회논문지
• /
• 제62권2호
• /
• pp.190-195
• /
• 2013

Vacuum circuit breaker(VCB) has been widely used for interruption of load current and fault current for high voltage motor in the industrial field. Its arc extinguishing capability is excellent compared to other breakers. But it has the potential to cause multi reignition surge by high extinguishing capability. Surge voltage is generated by the opening and closing of VCB. Multi reignition surge of VCB is steep-fronted waveform. It may have a detrimental effect on the motor winding insulation. So, most of users install a protection device to limit steep-front waveform at the motor terminal or breaker side. So, most of users install a protection device at the motor terminal or breaker side. This protective device is surge absorber(SA) such as ZnO and RC type. In this study, we analyzed whether there is any effect when two type SA is applied to the VCB multi reignition surge. We confirmed that ZnO SA is slightly more effective than RC SA for reduction of multi reignition surge.

• 대한원격탐사학회지
• /
• 제37권5_1호
• /
• pp.999-1011
• /
• 2021

다중 센서 영상으로부터 공간 및 시간해상도가 모두 높은 영상을 예측하는 시공간 융합에서 다중 센서 영상의 방사학적 불일치는 예측 성능에 영향을 미칠 수 있다. 이 연구에서는 다중 센서 위성영상의 서로 다른 분광학적 특성을 보정하는 방사보정이 융합 결과에 미치는 영향을 분석하였다. 두 농경지에서 얻어진 Sentinel-2, PlanetScope 및 RapidEye 영상을 이용한 사례연구를 통해 상대 방사보정의 효과를 정량적으로 분석하였다. 사례연구 결과, 상대 방사보정을 적용한 다중 센서 영상을 사용하였을 때 융합의 예측 정확도가 향상되었다. 특히 입력 자료 간 상관성이 낮은 경우에 상대 방사보정에 의한 예측 정확도 향상이 두드러졌다. 분광 특성의 차이를 보이는 다중 센서 자료를 서로 유사하게 변환함으로써 예측 성능이 향상된 것으로 보인다. 이 결과를 통해 상대 방사보정은 상관성이 낮은 다중 센서 위성영상의 시공간 융합에서 예측 능력을 향상시키기 위해 필요할 것으로 판단된다.

• 한국산업정보학회논문지
• /
• 제25권3호
• /
• pp.61-82
• /
• 2020

본 연구는 멀티채널 환경 내에서 소비자의 쇼루밍에서 웹루밍으로의 쇼핑 행동 전환에 대한 연구로 밀고 당기기 이주 (Push-pull-mooring: PPM) 이론을 적용하였다. 웹루밍 의도에 영향을 미치는 변수로는 푸쉬 효과 (Push effect), 풀 효과 (Pull effect), 그리고 계류 효과 (Mooring effect)로 설정하고, 쇼루밍의 실용적 쇼핑가치의 결핍을 푸쉬 효과로, 웹루밍의 경험적 쇼핑가치를 풀 효과로, 그리고 쇼루밍 락인을 계류 효과로 개념화하였으며, 각각에 영향을 미치는 선행변수들을 문헌연구를 통해 도출하고 연구모형을 설계하였다. 276부의 설문을 대상으로 실증분석을 실시하였으며, 구조방정식 모형을 검증한 결과, 쇼루밍의 실용적 쇼핑가치 결핍과 웹루밍의 경험적 쇼핑가치는 웹루밍 의도에 긍정적인 영향을 미치며, 쇼루밍 계류는 웹루밍 의도에 부정적 영향을 미친다는 것이 확인되었다.

• 한국해양공학회지
• /
• 제25권2호
• /
• pp.29-35
• /
• 2011

In order to effectively control waves in a coastal zone, Multi-Cylinder Piles have been suggested as economic structures. A numerical analysis was conducted using the Delft-3D: WAVE module based on SWAN, which considered wave shoaling and refraction. Moreover, irregular waves were used to investigate the hydrodynamic characteristics of the wave interaction with the structure. In this paper, a numerical analysis was carried out to research the effect of wave control through a wave height analysis concerning an existing, concrete wave breaker and multi-cylinder piles placed at the same location. As a result, the effect of the wave control is shown using the wave breaker, multi-cylinder piles, and existing data.

• Journal of the Optical Society of Korea
• /
• 제14권4호
• /
• pp.351-356
• /
• 2010

We investigated the combined effect of fiber chromatic dispersion and self-phase modulation (SPM) in multi-channel subcarrier multiplexed (SCM) optical transmission systems. We theoretically analyzed the transmission characteristics of the SCM signals with the effect of SPM and chromatic dispersion in a single-mode optical fiber by numerical simulations based on the nonlinear Schrodinger equation. The numerical simulation results revealed that the effect of fiber dispersion and SPM could occur independently between subcarrier channels in two-channel SCM systems for small optical modulation index (OMI) and large channel spacing. However, for large OMI, small channel spacing, and large fiber launching power, we found a performance degradation of the two-channel system compared to that of a single-channel system. These parameters are therefore important for the optimization of multi-channel SCM systems applicable to radio over fiber networks.

• 한국소음진동공학회논문집
• /
• 제16권9호
• /
• pp.912-918
• /
• 2006

A modeling method for the vibration analysis of rotating multi-blade systems considering the coupling stiffness effect is presented in this paper. Blades are assumed as cantilever beams and the coupling stiffness effect originates from disc or shroud between blades. As the angular speed, hub radius ratio, and the coupling stiffness vary, the natural frequencies of the system vary. Numerical results show that the coupling stiffness is very important to estimate the natural frequencies. Along with the natural frequencies, associated mode shapes, critical angular speed, and critical hub radius ratio are obtained through the analysis.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.1354-1359
• /
• 2006

A modeling method for the vibration analysis of rotating multi-blade systems considering the coupling stiffness effect is presented in this paper. Blades are assumed as cantilever beams and the coupling stiffness effect originates from disc or shroud between blades. As the angular speed, hub radius ratio, and the coupling stiffness vary, the natural frequencies of the system vary. Numerical results show that the coupling stiffness is very important to estimate the natural frequencies. Along with the natural frequencies, associated mode shapes, critical angular speed, and critical hub radius ratio are obtained through the analysis.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 D
• /
• pp.2337-2340
• /
• 2002

This paper presents the method of AGV(Automatic guided vehicle)'s moving environment(plane, corner, edge) recognition using SONAR sensor configuration. As for the SONAR sensor, the Crosstalk effect has been generally considered as an inevitable noisy phenomenon in the indoor environment. However, this effect can be used as a clue for classifying and localizing targets in the indoor environment if those can be controlled and used well. EERUF(error eliminate rapid ultrasonic firing) is a method for firing multiple ultrasonic sensors in mobile robot application and multi-echo mode of POLARIOD Device can reduce the Crosstalk effect. Here, Crosstalk effect was reduced using EERUF and applied to the AGV with a simple wall-following algorithm in the indoor environment. This method was tesed by a typical AGV with multi SONAR sensors in the laboratory environment.