• Journal of the Korean Wood Science and Technology
• /
• v.27 no.1
• /
• pp.88-104
• /
• 1999

This study was carried out to classify the Hanjis into three groups that were indigenous Hanji, traditional Hanji, and improved Hanji handmade by paper making method according to the physical properties of each paper sheet such as tensile, bursting and tearing strength, folding endurance and fiber orientation in each layer. The results obtained were summarized as follows: 1. The multi-layered Hanjis made by "Oebal" Hanji making method in different direction of fiber orientation have good properties in tearing resistance. 2. The multi-layered Hanji in different direction of fiber orientation has good properties in the tearing resistance, but the burst index and the breaking length results were lower than the single layered Hanjis. 3. The different fiber orientation and multi-layered method didn't increase, the three indexes(burst index, tear index, breaking length). Only, the different direction of fiber orientation decreased the difference of width and length strength (tensile, tear) of the Hanji. 4. "Dochim"(Korean finishing touch process for indigenous Hanji by fulling round sticks) greatly increase folding endurance(double folds, not $log_{10}$) and good effect to tensile strength and burst strength. 5. The today's Oebal Hanji were the maximum of 2 layers and the indigenous Oebal Hanji were 16 layers the maximum. In addition, average of the indigenous Oebal Hanji was 4 layers(all 4-layer Hanji were the different fiber orientation of each layer). 6, The indigenous Hanji(multi-layered, and different fiber orientation) was good condition with "Dochim". Dochim increased tensile strength and burst strength of the indigenous Hanji. So the three-strength indexes were similar level("--"). 7. When the number of layer which were same fiber orientation increase, the increased Hanji became similar strength pattern("V", breaking length and burst index was higher than tear index) with "Ssangbal" Hanji. 8. The single layered papers that made by "Oebal" Hanji making method were similar strength pattern with Ssangbal Hanji. 9. There was no way to find the width and length direction of multi-layered Hanji by comparison between the difference of tensile strength and the difference of tearing resistance. 10. The compared pattern of tensile strength and tearing resistance of indigenous Oebal Hanji was different from today's Oebal Hanji. Especially, the tearing resistance of all indigenous Oebal Hanji(16 samples) was stronger on width of tearing resistance. And in the half of indigenous Oebal Hanji samples, the width of tensile strength and tearing resistance was stronger than length strength (Indigenous Oebal: '$\ulcorner\lrcorner$' 50%, '$\bigcup$' 50% $\leftrightarrow$ Today's Oebal: '$\ulcorner\lrcorner$' 12%, '$\bigcup$'6%, '$\llcorner\urcorner$'17%, '$\bigcap$'65%). In 65% today's Oebal, the length direction of tensile strength and tearing resistance was stronger than the width direction.

• Journal of Distribution Science
• /
• v.13 no.9
• /
• pp.81-93
• /
• 2015

Purpose - "Showrooming" refers to the phenomenon where a shopper visits a store to see and compare products but makes the purchase online at a lower price. Surveys on showrooming activities at home and abroad indicate that a significant number of consumers pursue showrooming activities. The advent of "showroomers," who engage in buying activities, hovering both on and offline, while selectively choosing sales channels to suit their needs, is powerful enough to erode the borders between channels and bring about seismic changes in the distribution industry. However, surprisingly, there has been no in-depth discussion on showrooming. This study seeks to theoretically investigate what impact personal characteristics have on showrooming preferences and attitudes in a multi-channel environment. Specifically, assumptions have been made that price perception, perceived performance risk, and trust in online shopping not only have a direct impact on showrooming attitudes but also indirectly affect it through the means of contact motivation. Research design, data, and methodology - To test the hypotheses, this study conducted a survey of male and female shoppers, ages 20 through 40s, who live in metropolitan areas, and have actively showroomed fashion items in the last six months. A clothing item usually purchased after a careful decision-making process was chosen as the target product of the study. The survey was conducted between October and November 2014, using a professional survey service provider. A total of 200 surveys were collected, of which 198 were used for analysis. Conceptual model Structural Equation Modeling (SEM) and Amos 18.0 were employed for data analysis and model verification. In addition, following the confirmatory factor analysis and measurement model analysis, the theoretical model that corresponds to the research model was analyzed. Results - Analysis results show that price perception, perceived performance risk, and trust in online shopping have a statistically significant and positive (+) impact on showrooming attitudes. In addition, in terms of the indirect influence of price perception and perceived performance risk on showrooming attitudes through means of contact motivation, price perception had a statistically significant and positive impact on means of contact motivation, whereas perceived performance risk did not have a statistically significant impact on it, with the relevant hypothesis rejected. Conclusions - These analysis results imply that the ultimate goal of consumers is to maximize their shopping benefits by selectively and strategically taking advantage of different channels in a complementary manner. This study presents many implications for distributors to encourage a deep understanding of showrooming consumers who have complicated consumption behaviors and to build channel integration strategies. This study has limitations in theoretical and practical implications. Therefore, subsequent studies need to focus on verifying that showrooming activities are based on reasonable and planned decisions by applying the theory of reasoned or planned behavior. In addition, the scope of the study should expand to include web showrooming, where consumers conduct product research online and purchase offline.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.43 no.4
• /
• pp.1-14
• /
• 2015

In the West, of the body's five senses sight is considered the most important but Ocular-centralistic thinking contains many issues. Privileging the subject and inhibiting interaction with the other senses, Ocular-centrism limits the experience of the world to the visual area. However, experiences can be understood as 'touching' various forms and are related to touch. With the heightened interest in the multi-sensuous side of the body contrary to Ocular-centrism, the intervention of the body in the external space has become an important issue in modern landscape architecture. This study explores the possibility of the haptic perception system that causes the active experience of a subject. Haptic perception plays a catalytic role leading an active experience of the subject and the subject experiences a sense of place through such haptic perception. By revealing what was known through the sense of touch through the concurrency and interaction of the various senses, haptic perception draws active participation The haptic perception system has been studied in various fields but has not been studied in the field of landscape architecture. Thus, this study discusses the aspect of haptic perception limited to landscape architecture shown before modernism. In a discussion on haptic perception, the concept of haptic perception is clarified through previous study reviews and literature and the characteristics of haptic perception are derived. Then, the problems of the Ocular-centrism system and the need for haptic perception are discussed. In the historical development process of haptic perception, the change process of the scopic regime is examined chronologically and the ways in which Ocular-centralistic thinking and anti-Ocular-centralistic thinking have been projected on the architecture and landscape architecture of each age are studied via literature and cases studies. The impact of the scopic regime on the landscape architecture field in the historical change process is examined.

• CRM연구
• /
• v.1 no.1
• /
• pp.23-48
• /
• 2006

Internet B2C marketplace such as 'Auction', 'G Market', 'Daum onket' etc.(called open market) has grown sharply in sales about yearly 100% rate increase in recent 1-2 years in Korea. Although Open marketplace has much reputation and the customer loyalty, almost of merchants participated in open market, which size in sales are medium/small, has poor reputation and trust. Consumers, who have to get in touch with untrustworthy merchants for trade in openmarket, perceive high trade risk which undergo the monetary damages such as 'merchandise never received'. This examines what factors consumer trust develop in online marketplace. This study explores several perceived risk factors in an open market by factor analysis and multi-regression to prove the relationships between the degree of trust for the merchants and the perceived trade risk. 133 data collected from the open market user data in this survey. In this study, the consumer's trade satisfaction in open market is low by 4.2 point degree of 7 point likert scale. and perceives 4 trade risk factors such as (1) 'failure to honor warranty or guarantee' (2) 'defective/poor goods in quality' (3) 'merchandise never received or received late' (4) 'poor information'. the degree of merchant's trust has significant relationship with the degree of perceived risk(sig. = 0.0000, $R^2=.327$) We find that the open market has to enhance the relationship marketing of trust by developing the strategies.

• Science of Emotion and Sensibility
• /
• v.23 no.1
• /
• pp.29-40
• /
• 2020

Visually impaired people use tactile maps to get spatial information about their surrounding environment, find their way, and improve their independent mobility. However, classical tactile maps that make use of braille to describe the location within the map have several limitations, such as the lack of information due to constraints on space and limited feedback possibilities. This study describes the development of a new multi-modal interactive tactile map interface that addresses the challenges of tactile maps to improve the usability and independence of visually impaired people when using tactile maps. This interface adds touch gesture recognition to the surface of tactile maps and enables the users to verbally interact with a voice agent to receive feedback and information about navigation routes and points of interest. A low-cost prototype was developed to conduct usability tests that evaluated the interface through a survey and interview given to blind participants after using the prototype. The test results show that this interactive tactile map prototype provides improved usability for people over traditional tactile maps that use braille only. Participants reported that it was easier to find the starting point and points of interest they wished to navigate to with the prototype. Also, it improved self-reported independence and confidence compared with traditional tactile maps. Future work includes further development of the mobility solution based on the feedback received and an extensive quantitative study.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.9
• /
• pp.107-115
• /
• 2013

Smart appliances with multi-media and telecommunication equipments provide users complicated convenience functions. On the contrary, 8-bit controller-based low performance electronics still cannot afford such multimedia and telecommunication. If we find a way to have low-end electronics connected and provide complicated functions, they can be also made "smart". Fortunately, 8-bit controllers used in low-end appliances have UART, which can be connected to any of BlueTooth, Wi-Fi and ZigBee communication modules which can, in turn, communicate with smart devices. Any communication module can be attached to the low-end electronics due to the variety of smart devices' connectivity at the other side. Although the convenience functions seem complicated, they are actually macros in a script form composed of micro commands which implement the base functions of appliances. Since the kinds of the base functions are not that many, the low-end electronic appliances will become "smart" if their control program can be extended to execute sequentially the micro commands in any combination. Such simple innovation has not seen the world, until now due to the overhead of the additionally required hardware such as display devices and buttons. The high-quality display and touch screen functionalities of smart devices can replace the required hardware, and remove the overhead completely. In fact, the low-end appliances become smart as if an "evolution kit" is newly equipped.

• Journal of Biosystems Engineering
• /
• v.28 no.6
• /
• pp.517-524
• /
• 2003

There have been worldwide research and development efforts to automate various processes of bio-production and those efforts will be expanded with priority given to tasks which require high intensive labor or produce high value-added product and tasks under hostile environment. In the field of bio-production capabilities of the versatility and robustness of automated system have been major bottlenecks along with economical efficiency. This paper introduces a new concept of automation based on tole-operation, which can provide solutions to overcome inherent difficulties in automating bio-production processes. Operator(farmer), computer, and automatic machinery share their roles utilizing their maximum merits to accomplish given tasks successfully. Among processes of greenhouse watermelon cultivation tasks such as pruning, watering, pesticide application, and harvest with loading were chosen based on the required labor intensiveness and functional similarities to realize the proposed concept. The developed system was composed of 5 major hardware modules such as wireless remote monitoring and task control module, wireless remote image acquisition and data transmission module, gantry system equipped with 4 d.o.f. Cartesian type robotic manipulator, exchangeable modular type end-effectors, and guided watermelon loading and storage module. The system was operated through the graphic user interface using touch screen monitor and wireless data communication among operator, computer, and machine. The proposed system showed practical and feasible way of automation in the field of volatile bio-production process.

• Journal of Digital Convergence
• /
• v.16 no.1
• /
• pp.287-292
• /
• 2018

The digital multimedia environment, centered on Information and Communications Technologies (ICT) technology, has transformed our imagination into a diverse experience. The flexible display, which was born as a means of human-machine communication required in a highly information-oriented society, It is creating a new market by linking with Internet of things. ecause the interface of a flexible display can provide a physical form as a result of input or output, user-centered interface design is paramount. Therefore, the researchers of this paper have studied the physical deformation and characteristics of flexible display by user manipulation through literature and case studies. Therefore, the authors of this paper studied the physical deformations and characteristics of flexible displays by user manipulation through literature and case studies. This research suggests the following guidelines for a flexible display interface design for the user experience. First, it must be designed to provide the functionality that users need in a variety of display environments. Second, in using the interface, external factors should be removed from the viewing angle of multi-users. Third, all possible user actions should be considered on flexible displays other than touch and contact. Fourth, flexible design of flexible display requires changing interface design for user experience.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.731-732
• /
• 2007

This paper presents the final configuration of test field and test items for the application of IEC 60364-4-44 in Korea. IEC 60364-4-44 provides rules for the protection against the effects of conducted and radiated disturbances on electrical installations. Especially this standard deals with the protection of low voltage facility against the ground fault in the high voltage side of power distribution system. Many countries define the regulations on the use of electrical facilities based on their own power system and technical references which are considered to be suitable for them. The background of circuit of IEC 60364-4-44 is based on the ungrounded system as most of European countries. However, domestic electric power distribution system is based on multi-grounding system different from European system. Therefore, it is necessary to evaluate or prove the effect of the IEC 60364-4-44 for introducing and applying it to the domestic grounding system as a national standard. The authors with KEA(Korea Electric Association) carried out a project on the application of IEC 60364-4-44 to Korean electrical installations of buildings sponsored by Korean ministry of commerce, industry and energy for three years(2004.4.1$\sim$2007.3.31). The test field is established in K.E.R.I.(Korea Electrotechnology Research Institute), which is the purpose of evaluating the formula to calculate touch voltage and stress voltage in the IEC standards. This paper presents some considerations and final configuration of test field to evaluate and introduce the IEC 60364-4-44 applicable to domestic rule for the protection against ground fault.

• Journal of Chest Surgery
• /
• v.39 no.10 s.267
• /
• pp.754-758
• /
• 2006

Background: Surgical role for acute coronary syndrome has been reduced in recent years due to development of drug eluting stent. We evaluated the surgical results of acute coronary syndrome in our hospital. Material and Method: Between January 2001 and August 2005, 416 patients underwent coronary artery bypass grafting (CABG) under diagnosis of non-ST-elevation acute coronary syndrome (NSTE ACS). Mean age was $61.8{\pm}9.0$ years and 276 (66.3%) patients were male. 324 (77.9%) patients had triple vessel disease and 92 (22.1%) had left main disease at angiographic study. 236 (56.7%) patients had hypertension and 174 (41.8%) had diabetes mellitus. Conventional on-pump CABG was performed in 194 patients (46.6%) and off-pump CABG in 222 (53.4%). Total arterial revascularization with no touch technique was done in 97 patients (23.3%). The number of total distal anastomosis was 1,306 and the number per patient was $3.21{\pm}1.71$. Result: Surgical mortality rate was 1.0% (4 patients) and postoperative complication rate was 15.6% (65 patients). Graft patency was checked at mean $3.7{\pm}7.6$ months (from 1 to 37 months) postoperatively with multi-directional computed tomography in 152 patients. Left internal mammary artery was patent in 95.3%, right internal mammary artery in 98.1%, radial artery in 92.2% and saphenous vein in 89.0%. Conclusion: The surgical treatment of NSTE ACS showed relatively low mortality rate and good graft patency rate. Further study is needed to compare the long term results with drug eluting stent.