• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.12
• /
• pp.1113-1119
• /
• 2013

In this letter, a new approach is proposed for the design of a multi antenna for MIMO wireless devices. The proposed antenna covers various LTE(Long Term Evolution) service bands: band 17(704~746 MHz), band 13(746~787 MHz), band 5(824~894 MHz), and band 8(880~960 MHz). The proposed main antenna consists of a conventional monopole antenna with an inverted L-shaped slit for wideband operation. The proposed the LTE sub antenna is based on a switch loaded loop antenna structure, with a resonance frequency that can be controlled by capacitance of a logic circuit. The tuning technique for the LTE Rx antenna uses a RF MEMS(Micro-Electro mechanical system) to match the impedances to realize the bands of interest. Because the two proposed antennas are polarized orthogonally to each other, the ECC(Envelope Correlation Coefficient) characteristic between two antennas was measured to be very low (below 0.06) with an isolation characteristic below -20 dB between the two antennas in the operating overall LTE bands. The proposed antenna is particularly attractive for mobile devices that integrate LTE multiple systems.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.5
• /
• pp.133-142
• /
• 2004

Recently, the growth of Internet and a variety of multimedia services through Internet increasingly demands high-speed packet transmission, the new routing function, and QoS guarantee on conventional routers. Thus, a new switching mechanical called the MPLS(Multi-Protocol Label Switching), was proposed by IETF(Internet Engineering Task Force) as a solution to meet these demands. In addition the deployment of MPLS network supporting Differentiated Services is required. In this paper, we propose the architecture of the MPLS switch supporting Differentiated Services in the MPLS-based network. The traffic conditioner consists of a classifier, a meter, and a marker. The VOQ-PHB module, which combines input Queue with each PHB queue, is implemented to utilize the resources efficiently. It employs the Priority-iSLIP scheduling algorithm to support high-speed switching. We have designed and verified the new and fast hardware architecture of VOQ-PHB and the traffic conditioner for QoS and high-speed switching using NS-2 simulator. In addition, the proposed architecture is modeled in VHDL, synthesized and verified by the VSS analyzer from SYNOPSYS. Finally, to justify the validity of the hardware architecture, the proposed architecture is placed and routed using Apollo tool.

• Health Policy and Management
• /
• v.24 no.1
• /
• pp.24-34
• /
• 2014

Background: Bankrupted households have recently been increased due to excessive medical expenditure in Korea. They have not been protected from economic risk when household's member has severe diseases that need a lot of money for treatment. Purpose of this study examines policy effect by comparing unmet needs' change of policy object households and non-object groups. Methods: We used Korea Health panel 2nd 4th data collected by Korea Institute for Health and Social Affairs and National Health Insurance Service. Analysis subjects were 381 households (pre-policy) and 393 households (post-policy) that had cancer and cardiovascular and cerebrovascular diseases. Since it was major concern that estimates benefit strengthening policy started by certain time, we setup comparing households which had diabetes, hypertension disease. Comparison subjects were 393,247 households, respectively and we evaluated policy effect using difference in difference (DID) model. Results: Although unmet needs of policy object households were higher than non-object groups, policy execution variable affected negative direction. But interaction-term which shows pure effect of policy was not statistically significant. We utilized multi-DID model to examine factors affecting unmet needs causes. Copayment assistance policy did not significantly affect households that responded to 'economic reason,' and 'no have time to visit' for unmet needs causes. Conclusion: The second copayment assistance policy did not significantly give positive effect to beneficiary households than non-beneficiary groups. When we consider that primary purpose of public insurance guarantee high medical expenditure occurred by unexpected events, it needs to deliberate on switch of benefit strengthening policy that can assist vulnerable people. Also, we suggest that government forward a policy covering non-reimbursable medical expenses as well as switch of benefit strengthening direction because benefit policy do not affect non-covered medical cost which accounts for quarter of total health expenditure.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.12
• /
• pp.29-38
• /
• 2001

Recently, as Internet and its services grow rapidly, IETF(Internet Engineering Task Force) introduced a new switching mechanism, MPLS(Multi-Protocol Label Switching), to solve the problem of the scalability in Internet backbone. In this paper, we implemented the LSR loaded with VC-merging function, which causes LSR's management cost to be significantly reduced. We propose a new VC-merge function which supports differentiated services. In case of network congestion in the output buffer of each core LSR, appling link polices to the output modules of the LSR using the EPD algorithm can prevent the buffer from being overflowed. Simulation was performed for Diffserv by using multiple traffic models and investigated the impact of VC-merge method compared to non VC-merge method. The proposed switch is modeled in VHDL and fabricated using the SAMSUNG $0.5{\mu}m$ SOG process.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.5
• /
• pp.209-214
• /
• 2014

IMS(IP Multi-Media Subsystem) is in the limelight as the Integrated wire and wireless Systems because of a sudden increase of smart mobile devices and growth of multimedia additional services such as IPTV. The structure of IMS is designed as a session control layer to provide various multimedia summative service using SIP based on IP communication network in order to carry out set-up, change and release by NGN of course, the existing voice services. But now It is broadly substituting in the IPTV, wire phone company and it is substituted in internet platform base on the soft-switch in currently. Especially, in currently, 4G LTE in a mobile communication company is rapidly growing in market. Therefore, in this study, we had designed and developed to the main prosser that can admit to 1000 user over and SIP gateway which can link the IMS Core that can link SIP Device which adopt the standard protocol on the SIP and to provide variable multimedia services.

• Journal of KIISE:Information Networking
• /
• v.30 no.2
• /
• pp.270-281
• /
• 2003

ETF made the RFCs of MPLS technologies for providing the QoS of ATM or Frame Relay and the flexibility&scalability of IP on the Internet services. IETF has been expanding MPLS technologies as a common control component for supporting the various switching technologies called GMPLS. Also, IETF has standardized the signaling protocols based on such technologies, such as LDP, CR-LDP and RSVP-TE. ETRI developed the MPLS system based on ATM switch in order to provide more reliable services, differentiated services and value-added services like the VPN and traffic engineering service on the Korea Public Sector network. We are planning on deploying model services and commercial services on that network. This paper explains the basic functions of LDP, design and development of LDP on our system, and compares with LDP development and operation on other MPLS systems made by Cisco, Juniper, Nortel and Riverstone. In conclusion, this paper deduces the future services and applications by LDP through these explanation and comparison.

• Smart Media Journal
• /
• v.8 no.2
• /
• pp.29-38
• /
• 2019

With the advancement of information and communication technology, tactical networks are continuously being converted to All-IP future tactical networks that integrate all application services based on Internet protocol. Futuristic tactical mesh network is built with tactical WAN (wide area network) nodes that are inter-connected by a mesh structure. In order to guarantee QoS (quality of service) of application services, tactical service mesh (TSM) is suggested as an intermediate layer between infrastructure and application layers for futuristic tactical mesh network. The tactical service mesh requires dynamic QoS monitoring and control for intelligent QoS coordination. However, legacy networking nodes used for existing tactical networks are difficult to support these functionality due to inflexible monitoring support. In order to resolve such matter, we propose a tactical mesh WAN node as a hardware/software co-designed networking node in this paper. The tactical mesh WAN node is conceptually designed to have multi-access networking interfaces and virtualized networking switches by leveraging the DANOS whitebox server/switch. In addition, we explain how to apply eBPF-based traffic monitoring to the tactical mesh WAN node and verify the traffic monitoring feasibility for supporting QoS coordination of tactical-mesh traffic.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.11
• /
• pp.1206-1218
• /
• 1992

Token ring systems which control to switch the data stream of networks by passing the token have been widely used to medium access controls in many ring or bus topology LANs. The system could be modeled for analysis as single-server-multi-queue system of the cyclic service method. These concepts could be expanded to multi-token ring systems interconnected with single ring consisting of bridges implemented simply to be stored and transmitted. In the proposal for the performance analysis of the interconnected token ring system, in has been assumed M/G/1 queueing model that frame arrivals are the Poisson process at each station queue and frame sizes are independently and identically distributed. And the average time delays were analyzed mathematically for arbitrary frame transferred from source station to destination area. The time delay of the frame transmission could be explained as the sum of the average time which the token passed from arbitrary position to source station, such as the waiting time in the source station transferring the previous arrival frames, and the propagation time from source station to interdestinated point. These delays were given as the sum of the duration from inner and outer bridge queues, the time delays from inner and outer bridge queues, and the time from outer bridge queue to destination station. These results were investigated by varing parameters effected to total time delays. In the results, those factors to be effected to dominant the total time delays were increased were in the cases of the high arrival rates and the high ration of destination of the other outerring. The system were shown the time delays increased exponentially in spite of the priority service policy. In order to decreasing the number of outerrings and increasing the number of nodes in backbone relatively, so the systems could be decreased the total delay in the interconnected token ring system.

• The Journal of the Korea Contents Association
• /
• v.12 no.12
• /
• pp.46-53
• /
• 2012

The traffic in research network for the new structure of the network and new service research has the various properties. From the perspective of a specific traffic point of view, transmission of traffic with different requirements using a single routing protocol is an obstacle to satisfy requirements. In this study, we classify the properties of the traffic into two types. We propose the way that we can get the overall optimization effect, the experiment proves it by providing independent multiple forwarding path by applying optimized algorithm by types. In order to distinguish each type of traffic we use the ports on the switch and in order to implement independent path we apply OpenFlow system. In other words, we present the measure that can be implemented to improve the satisfaction of the traffic by making multiple paths by OpenFlow controller according to the type of traffic and by enforcing in Forwarder.