• 센서학회지
• /
• 제12권4호
• /
• pp.191-197
• /
• 2003

최근 인터넷 사용의 증가로 인한 데이터 전송이 급속히 증가하고 있고, 이러한 전송을 위해 광섬유가 주로 사용되고 있다. 장거리 통신을 통한 신호의 감쇄 및 왜곡을 보정하기 위하여 보통 광신호를 전기적인 신호로 변환하여 신호를 재생한다. 이러한 광신호는 포토 다이오드를 통하여 전기적인 신호로 바꾸어지는데, 광신호의 정확한 클락과 데이터를 추출하는 과정은 필수적이다. 본 연구에서는 광대역의 광신호 클락과 데이터의 복원에 쓰이는 클락-데이터 복원회로(CDR)를 1.8V $0.18\;{\mu}m$ CMOS공정을 이용하여 설계하였다. 이 CDR 회로는 위상고정 루프를 사용한 회로로서 개선된 위상비교기 및 전하 펌프를 사용하였다. 특히 설계된 CDR은 광대역 링 발진기를 사용함으로서 750 Mb/s에서 2.85 Gb/s의 다중속도를 가진 데이터의 클락과 데이터의 복원이 가능하다.

• 전자공학회논문지SC
• /
• 제47권5호
• /
• pp.52-61
• /
• 2010

최근 피부의 마찰계수를 이용하여 한의학에서의 체질을 구별하는 연구가 활발히 이루어지고 있다. 피부의 마찰계수는 여러 고문헌에서도 알려져 있듯이 태음인과 소양인의 체질을 구별하는 인자로 활용되고 있다. 본 연구에서는 다축 로드셀과 일정하중식 접촉 프로브를 이용하여 피부의 마찰계수를 정량적으로 측정하는 장비를 개발하였고 이의 측정 불확도를 측정하였다. 개발된 장비의 상대 반복도는 2 %였다. 태음인과 소양인의 체질진단 구분을 위해 왼속 손등을 측정부위로 선택하여 실험한 결과 약지를 따라 측정하는 것이 가장 효과적임을 알 수 있었다. 20명의 피험자를 대상으로 임상측정을 한 결과, 개발된 장비의 경우 3 % 이내의 측정 불확도를 가지고 태음인과 소양인의 체질 구분을 할 수 있었다.

• 항공우주시스템공학회지
• /
• 제13권4호
• /
• pp.1-9
• /
• 2019

방송 통신, 지구관측, 기상관측, 해양관측, 그리고 항행 등 서로 다른 임무를 가지고 있는 위성들을 통합 운영하는 것은 보안에 취약하다. 현재 구성된 지상국 네트워크의 문제점은 시험 환경을 구축하여 분석하였다. 이를 바탕으로 하나의 지상국에 의해서 여려 개의 위성을 운영할 수 있는 네트워크를 설계하였다. 또한, 국내외 지상국과의 인터페이스 및 네트워크 구성방안을 제안하였다. 국내외 지상국과 연동하는 네트워크는 국가과학기술연구망과 글로벌과학기술협업연구망으로 구성하였다. 내부 네트워크는 방화벽, 가상사설망, DMZ, 1-way USB 등으로 구성하였다. 제안된 방법으로 네트워크를 구축하면 바이러스 유입 및 감염 등 유해 데이터를 차단할 수 있다.

• 전기전자학회논문지
• /
• 제28권1호
• /
• pp.78-89
• /
• 2024

차량용 반도체에서 사용되는 BCD 공정 기반의 PMIC 칩은 아날로그 회로를 트리밍하기 위해 추가 마스크가 필요없는 MTP(Multi-Time Programmable) IP(Intellectual Property)를 요구한다. 본 논문에서는 저면적 MTP IP 설계를 위해 2개의 트랜지스터와 1개의 MOS 커패시터를 갖는 single poly EEPROM 셀인 MTP 셀에서 NCAP(NMOS Capacitor) 대신 PCAP(PMOS Capacitor)을 사용한 MTP 셀을 사용하여 MTP 셀 사이즈를 18.4% 정도 줄였다. 그리고 MTP IP 회로 설계 관점에서 MTP IP 설계의 CG 구동회로와 TG 구동회로에 2-stage voltage shifter 회로를 적용하였고, DC-DC 변환기 회로의 면적을 줄이기 위해 전하 펌핑 방식을 사용하는 VPP(=7.75V), VNN(=-7.75V)와 VNNL(=-2.5V) 전하 펌프 회로에서 각각의 전하 펌프마다 별도로 두고 있는 ring oscillator 회로를 하나만 둔 회로를 제안하였으며, VPPL(=2.5V)은 전하펌프 대신 voltage regulator 회로를 사용하는 방식을 제안하였다. 180nm BCD 공정 기반으로 설계된 4Kb MTP IP 사이즈는 0.493mm²이다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.243.1-243.1
• /
• 2016

Recently, many groups have attempted to fabricate 3-dimensional (3D) structures of GaN such as pyramids, rods, stripes and annulars. Since quantum structures on non-polar and semi-polar planes of 3D structures have less influence of internal electric filed, multi quantum wells (MQWs) formed on those planes have high quantum efficiency. Especially, pyramidal and annular structures consist of various crystal planes with different emission wavelength, providing a possibillity of phosphor-free white light emtting diodes (WLEDs).[1] However, it still has problem to obtain high color rendering index (CRI) number because of narrow-band emission and poor indium composition caused by the formation of few number of facets during metal-organic chemical vapor deposition growth.[2] If we can fabricate 3D structure having more various facets, we can make broad-band emittied WLEDs and improve CRI number. In this study, we suggest a simple method to fabricate 3D structures having various facet and containing high indium composition by means of a combination of metal-organic chemical vapor deposition and wet chemical etching techniques.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2014년도 하계학술대회
• /
• pp.163-165
• /
• 2014

In this paper, we propose a world's first programmable video processing platform for video quality enhancement of 8K ($7680{\times}4320$) UHD (Ultra High Definition) TV at 60 frames per second. To support huge computation and memory bandwidth of video quality enhancement for 8K resolution, the proposed platform has unique features like symmetric multi-cluster architecture for data partitioning, ring data-path between clusters to support data pipelining, on-the-fly processing architecture to reduce DDR bandwidth, flexible hardware to accelerating common kernel in video enhancement algorithms. In addition to those features, general programmability of SRP (Samsung reconfigurable processor) as main core of the proposed platform makes it possible to upgrade continuously video enhancement algorithm even after the platform is fixed. This ability is very important because algorithms for 8K DTV is under development. The proposed sub-system has been embedded into SoC (System on Chip) and new 8K UHD TV using the programmable SoC is expected at CES2015 for the first time in the world.

• 소성∙가공
• /
• 제14권8호통권80호
• /
• pp.675-680
• /
• 2005

This study was aimed at the design of the dies for the automobile part for the engine oil leakage prevention using the computer simulation to shorten the period of production, on the basis of the process planning which was designed by the field experts. In the computer simulation,'eesy-2-form' of 2D FEM simulation package and 'eesy-DieOpt' have been used, which are the commercial process analysis and die design program. Through the simulation of 'eesy-2-form', we could know the propriety of the forming process, the inner pressure of the die and the suitable fitting pressure between the insert and the sleeve which was not showing any positive tangential stresses in the insert. Through the simulation of 'eesy-DieOpt', we could know the number of the stress ring, the diameter ratios, the stresses of the die, the shrink fitting tolerance and temperature in the condition of the already determined maximum outer die diameter of the multi-stage former. The validity of the die design using the computer simulation was analyzed by the experiments and the results were satisfactory. As the results of this study, the new and easy die design system for cold forging has been developed.

• 한국분말재료학회지
• /
• 제3권4호
• /
• pp.227-232
• /
• 1996

(i) The development of a metallurgical bond during the spray forming of clad products has offered the possibility of manufacturing large rolls, including those used in hot and cold strip mills. Small rolls are already being produced in Japan. (ii) Technical developments, including the use-of-multi-atomizers have resulted in the elimination of porosity from the internal bore of a sprayed tube. Bimetallic tubing can also be manufactured and the installation of a 4.5 ton tube plant in the USA should provide low operation costs. (iii) Spray forming offers a potentially low cost manufacturing route for superalloy ring/casing components in high strength superalloys. (iv) A large pilot plant has been built for the spray forming of ultra-clean superalloys for turbine disc applications. (v) Using twin-atomizing technology, special steel billets have been spray formed up to 400mm diameter with deposition yields in excess of 90%. (vi) Al/Si alloy extrusion billets with excellent dimensional tolerances are being manufactured for large scale automotive applications. Several new aluminum alloys have also been developed, including high strength, low density and low cocfficient of expansion materials. (vii) New copper alloys have been developed and pilot plants are in operation to produce these alloys once markets have become established.

• 기술사
• /
• 제34권4호
• /
• pp.41-47
• /
• 2001

The paper describes SR3 (Synchronous Round Robin with Reservations), a collision-free medium access control protocol for all-optical slotted packet networks based on WDM multi-channel ring topologies where nodes are equipped with one fixed-wavelength receiver and one wavelength-tunable transmitter SR3 is derived from the SRR and MMR protocols previously proposed by the same authors for the same class of all-optical networks. SRR and MMR already achieve an efficient exploitation of the available bandwidth, while guaranteeing a throughput-fair access to each node. SR3, In addition, allows nodes to reserve slots. thereby achieving a stronger control on access delays; it is thus well suited to meet tight delay requirements, as it is the case for multimedia applications. Simulation results show that SR3 provides very good performance to guaranteed qualify traffic, but also brings signigicant performance improvements for best-effort traffic. Energy effciency is an important issue for optical network since they must rely on their batteries. We present a novel MAC protocol that achieves a good energy efficiency of optical interface of the network and provides support for diverse traffic types and QoS. The scheduler of the base station is responsible to provide the required QoS to connections on the optical link and to minimise the amount of energy spend by the High speed Network. The main principles of the MaC protocol are to avoid unsuccessful actions, minimise the number of transitions , and synchronise the mobile and the base-station. We will show that considerable amounts of energy can be saved using these principles.

• 대한수학회보
• /
• 제46권4호
• /
• pp.743-769
• /
• 2009

An ID-based DNF signature scheme is an ID-based signature scheme with an access structure which is expressed as a disjunctive normal form (DNF) with literals of signer identities. ID-based DNF signature schemes are useful to achieve not only signer-privacy but also a multi-user access control. In this paper, we formally define a notion of a (non-interactive) ID-based DNF signature and propose the first noninteractive ID-based DNF signature schemes that are secure under the computational Diffie-Hellman and subgroup decision assumptions. Our first scheme uses random oracles, and our second one is designed without random oracles. To construct the second one, we use a novel technique that converts a non-interactive witness indistinguishable proof system of encryption of one bit into a corresponding proof system of encryption of a bit-string. This technique may be of independent interest. The second scheme straightforwardly yields the first ID-based ring signature that achieves anonymity against full key exposure without random oracles. We finally present two extensions of the proposed ID-based DNF signature schemes to support multiple KGCs and different messages.