• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.7
• /
• pp.55-60
• /
• 2017

This paper is proposed on the transmit Method Finger-Printer Scanning of Mutual Capacitance Touch Screen Panel Using Differential Pulse for improving the security of computer information. This system is composed of differential pulse generator and Ring-Counter, also Supply voltage is 5V. this system generates the Pulse wave which is composed of In-Phase and Out of Phase at 1MHz while period of 2m/s. it is designed and be able to operate four channels. overall power consumption is approximately 78.08nW. This prototype is implemented in 0.25um CMOS Process and Chip area is $870um{\times}880um$.

• Transactions of Materials Processing
• /
• v.29 no.5
• /
• pp.257-264
• /
• 2020

This paper is concerned with the influence of the plastic property of the rivet on the numerical prediction of the Self-Piercing Rivet (SPR) Joining. In order to predict the plastic property of the rivet, a ring compression specimen was directly fabricated from the rivet used for the mechanical joining of dissimilar materials, and the FE analysis together with the ring compression test was iteratively carried out by changing the plastic property of the rivet. For reliable FE analysis, a friction coefficient was estimated based on a friction calibration curve, measuring the reductions in inner diameter and height of the ring specimen after the compression test. From each simulation result, the force-displacement curves were then compared from each other so as to obtain the rivet plastic property that shows good agreement with the experimental result. The SPR joining between GA590 1.0t and Al5052 2.0t was conducted, and the numerical prediction was performed with the use of the plastic property evaluated based on the inverse analysis and the one referred from Mori et al. [11]. Comparison of the experiment and the numerical predictions in terms of the interlock and bottom thickness revealed that the reliable evaluation of the plastic property of the rivet is necessary for the trustworthy numerical prediction of the SPR joining.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.5
• /
• pp.475-485
• /
• 2010

This paper proposes a novel concept for a microstrip resonator that can function as a filter and as an antenna at the same time. The proposed structure consists of an outer ring, an open loop-type inner ring, a circular patch, and three ports. The frequencies where the proposed structure works as a filter and as an antenna, respectively, are determined primarily by the radius of the inner ring and the circular patch. The measured results show that, when the microstrip resonator operates as a filtering device, this filter has about 15.1 % bandwidth at the center frequency of 0.63 GHz and a minimum insertion loss of 1.5 dB within passband. There are three transmission zeros at 0.52 GHz, 1.14 GHz, and 2.22 GHz. In the upper stopband, cross coupling - taking place at the stub of the outer ring - and the open loop-type inner ring produce one transmission zero each. The circular patch generates the dual-mode property of the filter and another transmission zero, whose location can be easily adjusted by altering the size of the circular patch. The proposed structure works as an antenna at 2.7 GHz, showing a gain of 3.8 dBi. Compared to a conventional patch antenna, the proposed structure has a similar antenna gain. At the resonant frequencies of the filter and the antenna, high isolation(less than -25 dB) between the filter port and the antenna port can be obtained.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.12
• /
• pp.1327-1336
• /
• 2012

In this paper, the dual-faced monopole antenna, which is arranged by numerous rectangular ring patches in sequence for the multi-bands is proposed. The ring type structure of the patch can be increased the bandwidth. Therefore the bandwidth and beam width are improved by using multiple arrayed patches. When the ring type patches are inserted serially, the resonance frequencies are occurred by the current flow from the first ring patch. It is possible because the gap between the patches is very narrow. In addition, if the patches are composed on the same plane as the feed-line, fabrication could be very difficult because the gap between the patches is extremely narrow. The thickness and permittivity of the antenna, moreover, are very important parameters because both sides of the substrate are used. We finally found the optimal thickness and permittivity to generate the coupling effect by simulation. All patches are consisted of 4-steps which the patch size was decreased 85 % by each step. In conclusion, the resonant frequency bands are 1.75~2.6 GHz(850 MHz), 3.24~3.46 GHz(220 MHz), 3.8~4.0 GHz(200 MHz), and 4.4~4.9 GHz(500 MHz).

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.2
• /
• pp.129-138
• /
• 2012

In this study, three types of large scale multi-tasking machine tools together with core technologies involved have been developed and introduced; a multi-tasking machine tool for large scale marine engine crankshafts, a multi-tasking vertical lathe for windmill parts, and a large scale 5-axis machine tool of gantry type. Several special purpose devices has been necessarily developed for the purpose of handling and machining big and heavy workpieces accurately, such as PTD (Pin Turning Device) with revolving ring spindle for machining eccentric crankshaft pins, hydrostatic rotary table and steady rest for supporting and resting heavy workpieces, and 2-axis automatic swiveling head for high-quality free surface machining. Core technologies have been also developed and adopted on their detail design stage; 1) structural design optimization with FEM structural analysis, 2) theoretical hydrostatic analysis for the PTD and rotary table bearings, 3) box-in-box type cross-rail and octagonal ram design to secure machine rigidity and accuracy, 4) constant spindle rpm control against gravitational torque due to unbalanced workpiece.

• Geophysics and Geophysical Exploration
• /
• v.14 no.1
• /
• pp.18-24
• /
• 2011

A multi-channel seismic reflection (MCS) survey was conducted in 2009 to explore the deep crustal structure of the Pacific Plate south of Hokkaido. The survey line happened to traverse a 250-km-wide Warm Core Ring (WCR), a current eddy that had been generated by the Kuroshio Extension. We attempted to use these MCS data to delineate the WCR fine structure. The survey line consists of two profiles: one with a shot interval of 200m and the other with a shot interval of 50 m. Records from the denser shot point line show much higher background noise than the records from the sparser shot point line. We identified the origin of this noise as acoustic reverberations between the sea surface, seafloor and subsurface discontinuities, from previous shots. Results showed that a prestack migration technique could enhance the signal buried in this background noise efficiently, if the sound speed information acquired from concurrent temperature measurements is available. The WCR is acoustically an assemblage of concave reflectors dipping inward, with steeper slopes (${\sim}2^{\circ}$) on th ocean side and gentler slopes (${\sim}1^{\circ}$) on the coastal side. Within the WCR, we recognised a 30-km-wide lens-shaped structure with reflectors on the perimeter.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.4
• /
• pp.35-42
• /
• 2013

In this paper, the analog performance of FinFET structure was estimated by extracting the DC/AC characteristics of the 22 nm process FinFET structures with different layout considering spacer and SEG using 3D device simulator, Sentaurus. Based on the analysis results, layout methods to enhance the analog performance of multi-fin FinFET structures are proposed. By adding the spacer and SEG structures, the drive current of 1-fin FinFET increases. However, the unity gain frequency, $f_T$, reduces by 19.4 % due to the increase in the total capacitance caused by the added spacer. If the process element is not included in multi-fin FinFET, replacing 1-finger with 2-finger structure brings approximately 10 % of analog performance improvement. Considering the process factors, we propose methods to maximize the analog performance by optimizing the interconnect and gate structures.

• Korean Institute of Interior Design Journal
• /
• v.19 no.2
• /
• pp.107-116
• /
• 2010

In Europe, traditionally the low-rised buildings for public art museum have been constructed since the 18th century like any other buildings and these are because of the technical issue for construction difficulty. Even if the low-rised art museum buildings are still continued for it's construction, gradually the high-rised art museum buildings begin to be build due to the development of contemporary technology in high-dense modern urban space. This tendency of high-rised art museum building in recent years is expected to affect on the interior space of it and most of all the spatial change in conjunction with circulation system variation is remarkable. Because the circulation system in art museum means tourist's spatial experience and it normally controls the experience of knowledge in art museum. This study is to understand how the multi-floored art museums in Europe affect to the spatial structure and how this is related to the circulation system. And also the study raised an issue on what it's social meaning is. Through these analysis the study can provide the meaning of multi-floored art museum and basic indication in art museum planning. To understand this, the study calculated the number of stories, number of vertical circulation and number of ring-structure space. Also the study tired to use space syntax tools, which are connectivity, integration value, integration value in major space, integration value in vertical circulation and intelligibility value. those tools alculated topological transfiguration of the whole space.Throughout the study, it was concluded that the influence of high-rised art museum in Europe changed the spatial structure and circulation system. The topological center of art museum that has been the grand space since 18th century changed to the vertical circulation due to the it's roll of distributing visitors to each floor. It became a starting point of spatial deployment and experience in art museum.

• Journal of Pharmaceutical Investigation
• /
• v.41 no.2
• /
• pp.95-102
• /
• 2011

An amphiphilic cationic branched methoxy poly (ethylene glycol)-branched polyethylenimine - poly(L-phenylalanine) (mPEG-bPEI-pPhe) block copolymer was successfully synthesized by ring-opening polymerization (ROP) of N-carboxyanhydride of L-phenylalanine (Phe-NCA) with mPEG-bPEI for the preparation of more stable polyelectrolyte complex (PEC) included a hydrophobic interaction. mPEG-bPEI was firstly prepared by the coupling of mPEG and bPEI using hexamethylene diisocyanate (HMDI). The structural properties of mPEG-bPEI-pPhe copolymers were confirmed by $^1H$ NMR. The copolymers exhibited a self-assemble behavior in water above critical aggregate concentration (CAC) in the range of 0.01-0.14 g/L. The CAC of copolymers obviously depended on the hydrophobic block content in the copolymers (the value decreased with the increase of the pPhe block content). The cationic copolymers have the ability to form multi-interaction complex (MIC) with bovine serum albumin (BSA) and plasmid DNA through multi-interaction (electrostatic and hydrophobic interaction). The physicochemical characterization of the complex was carried out by the measurement of zeta potential and particle size. Their zeta-potentials were positive (approximately +10 mV) and their sizes decreased with increasing pPhe contents in the copolymers (PPF/BSA wt% ratio = 2). The complex showed good stability at high ionic strength. Therefore, mPEG-bPEI-pPhe block copolymer was considered as a potential material to enhance the stability of complex including biotherapuetic drugs.

• Journal of KIISE:Computer Systems and Theory
• /
• v.30 no.9
• /
• pp.461-476
• /
• 2003

Due to the implementation ease and alleviation of memory bottleneck effect, NUMA architecture has dominated in the multiprocessor systems for the past several years. However, because the NUMA system distributes memory in each node, frequent remote memory access is a key factor of performance degradation. Therefore, efficient design of RAC(Remote Access Cache) in NUMA system is critical for performance improvement. In this paper, we suggest Multi-Grain RAC which can adaptively control the RAC line size, with respect to each application behavior Then we simulate NUMA system with multi-grain RAC using MINT, event-driven memory hierarchy simulator. and analyze the performance results. At first, with profile-based determination method, we verify the optimal RAC line size for each application and, then, we compare and analyze the performance differences among NUMA systems with normal RAC, with optimal line size RAC, and with multi-grain RAC. The simulation shows that the worst case can be always avoided and results are very close to optimal case with any combination of application and RAC format.