• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.4
• /
• pp.159-167
• /
• 2018

In this paper, we propose an algorithm to optimize energy efficiency in a multi-user decoupled RF energy harvesting network and experiment on the trend of energy efficiency change assuming users' various geographical distribution scenarios. In the RF energy harvesting network where both wireless data transmission and RF energy harvesting are simultaneously performed, the energy efficiency is a key indicator of network performance, and it is necessary to investigate how various factors can affect the energy efficiency. In order to increase energy efficiency effectively, we can confirm that users' distributions are important factors in the RF energy harvesting network from the simulation results.

• Journal of Digital Contents Society
• /
• v.15 no.4
• /
• pp.457-464
• /
• 2014

Recently, interests in space information data are increasing due to the initiation of spatial information open platform service by the Ministry of Land, Infrastructure and Transport. The purpose of this study is optimizing management and storing of the texture data, one kinds of 3D-spatial data. First, extract 3D-spatial data through the aerial triangulation and 3D-writing using raw image taken with the Multi-directional aerial camera and the vertical aerial camera. And develop the method to create single texture data and related technique by align and place corresponding 3D-spatial data to optimal storage space. Through experiment, the results show effect of 8 times of storage capacity reduction compared to existing single-file storage method, additionally, new method can improve file management efficiency in comparison with multiple file storage method. The results of this study can be cornerstone of three-dimensional space information management when dealing with bulk data, and utilizations will be enhanced through the further studies and algorithm improvement.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.12
• /
• pp.1397-1404
• /
• 2014

Grab cranes are used for multi-purpose when the sand and soil are deposited into harbor wharf or the undersea construction is performed. Among the components of crane grab, the wire drum and disc brake pad are key expendables and have disadvantages that lot of heat is generated and very expensive when replacing them. In this study, the thermal image analysis for the disc brake, which works with wire drum of the crane is suggested. The suggested system performs the pad thermal diagnosis through the thermal image using the characteristics that the disc and pad surface temperatures are distributed abnormally before the brake failure and the disc pad damage. Therefore, the damage by the failure can be prevented by discovering the abnormality of the machine parts before failure and the life cycle of the pad and the cost can be extended and saved by operating the crane performing constant checkup for the overload.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.5
• /
• pp.153-160
• /
• 2010

We optimized the Si(substrate)/$SiO_2$(cladding)/$Si_3N_4$(antiresonant cladding)/$SiO_2$(core)/air multi-layers rib-optical waveguides of antiresonant reflecting optical waveguide (ARROW) for integrated optical biosensor structure utilizing beam propagation method (BPM). Thickness of anti-resonant cladding was derived to minimize the propagation loss and leaky field mode deeply related with evanescent mode was theoretically derived. Depth, width, refractive index and cladding thickness of anti-resonant cladding were numerically calculated into 2.3${\mu}m$, 5${\mu}m$, 1.488, and 0.11${\mu}m$ respectively to minimize propagation loss using the BPM simulation tool. Finally one- and two-dimensional propagation characteristics of ARROW was confirmed.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.7 no.2
• /
• pp.16-24
• /
• 1997

This paper proposes a modified GA whose individuals have their own ages. Thus, a chromosome will die only when the age becomes zero, as a result, the population size of this method increases according to the generations. This helps a GA to preserve the good characteristics of a few chromosomes during several generations if the ages are evaluated with fitness values. As a result, the performance of the method is better than that of existing ones. A multi-modal function optimization problem is employed to simulate the performance of this method. To show the effective:~esso f ageing paradigm, three ageing evaluation methods are introduced. A paper whose itlea is similar to that of ours have been published in a conference. We also experimented a method that showed the best performance in the paper. Original simple GA was also experimented and the performance is compared with others. However, the perforniance of the previous method shows worse than that of our methods in some aspects because the previous method didn't take the fitness value into account in the selection process.

• Korean Chemical Engineering Research
• /
• v.51 no.1
• /
• pp.25-34
• /
• 2013

The paper reviews the state of art in the design of liquefaction processes for the production of liquified natural gas, and addresses key design aspects to be considered in the design and how these design issues are systematically reflected in industrial applications. Various design options to improve energy efficiency of refrigeration cycles are discussed, including cascaded or multi-level pure refrigeration cycles which are used for covering wide range of cooling temperature, as well as mixed refrigerant cycle which can maintain a simple structure. Heat integration technique has been used for graphically examining differences of commercial cycles discussed in this paper, while energy efficiency and economics of commercial liquefaction processes has been summarized. Discussion also has been made about how to select the most appropriate set of drivers for compressors used in the liquefaction plant.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.244-244
• /
• 2010

Doping process of crystalline silicon solar cell process is very important which is as influential on efficiency of solar. Doping process consists of pre -deposition and diffusion. Each of these processes is important in the process temperature and process time. Through these process conditions variable, p-n junction depth can be controled to low and high. In this paper, we studied a optimized doping pre-deposition temperature for high solar cell efficiency. Using a $200{\mu}m$ thickness multi-crystalline silicon wafer, fixed conditions are texture condition, sheet resistance($50\;{\Omega}/sq$), ARC thickness(80nm), metal formation condition and edge isolation condition. The three variable conditions of pre-deposition temperature are $790^{\circ}C$, $805^{\circ}C$ and $820^{\circ}C$. In the $790^{\circ}C$ pre-deposition temperature, we achieved a best solar cell efficiency of 16.2%. Through this experiment result, we find a high efficiency condition in a low pre-deposition temperature than the high pre-deposition temperature. We optimized a pre-deposition temperature for high solar cell efficiency.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.44 no.3
• /
• pp.37-42
• /
• 2007

This paper reconsiders established power conservation models for ubiquitous sensor networks that use relay nodes instead of direct communication and proposes novel network power consumption model with consideration of the channel level and radio chip level simultaneously. We estimate the effect of minimum hop-count policy in terms of network power consumption through simulation of various situations for low power RF module CC2420. It is observed that maximum RF power and minimum hop-count results in lower energy consumption relatively. Also, in total network energy consumption, which is included re-transmission, minimum hop count policy presents decrease by 33.1% of energy consumption in compare with the conventional model.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.10
• /
• pp.3-10
• /
• 2014

In this paper, the performances of the presented D2D (device-to-device) systems under the environment of the cognitive convergent overlay networks are evaluated based upon the locations of the D2D users' terminals, the power consumptions of the terminals and the reductions of the interference levels. As the capabilities of the users' terminals improve, the optimization of the system is crucial to the efficient utilization of the radio resources of the individual networks considering their mobility and the features of their networks. Users' mobility model is given for the performance evaluation of the D2D system. In this paper, the performances of the D2D systems are evaluated in terms of the performance index of the FER (frame error rate) employing multiantenna techniques (MIMO:multiple input multiple output) for the various network environments.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.5
• /
• pp.132-141
• /
• 1996

The pixelated phase grating has been studied as a kind of diffraction gratings splitting and input beam into multiple spots. It consists of regular size cells which produce phase delays, and each cell provokes the phase delay up to sixteen levels. We have compared and analyzed the characteristics of multi-level phase gratings, laying streess on efficiency and resulted pattern. Experimental resutls obtained form fabricated grating have been presented, and the real-time method using a liquid-crystal spatial light modulator has been demonstrated through experiments. Gratings making meams with specific intensities have been designed and optical images have been generated by them. In order to specific intensities have been designed and optical images have been genrated by them. In order to decide the phase delay of each cell, optimization conditon consists of diffraction efficiency and target values. One period of phase gratings fabricated with surface relief was less than 256${\mu}m{\times}256{\mu}m$ and size of each cell was 1${\mu}m{\times}1{\mu}m$ surface relief grating has been made by coating photoresist on the glass plate, writing information pattern by Ar laser and developing it. in the experiment for real-tiem processing liquid-crystal display of epson video projector has been used.