• Journal of the Korean Society for Railway
• /
• v.13 no.2
• /
• pp.222-228
• /
• 2010

In this paper, we propose a optimization approach for the Electric Locomotive Overhaul Maintenance Facility (ELOMF), which aims at the simulation optimization so as to meet the design specification. In simulation design, we consider the critical path and sensitivity analysis of the critical (dependent) factors and the design (independent) parameters for the parameter selection and reduction of the metamodel. Therefore, we construct the multi-objective non-linear programming. The objective function is normalized for the generalization of design parameter while the constraints are composed of the simulation-based regression metamodel for the critical factors and design factor's domain. Then the effective solution procedure based on the pareto optimal solution set is proposed. This approach provides a comprehensive approach for the optimization of Train Overhaul Maintenance Facility(TOMF)'s design parameters using the simulation and metamoels.

• Structural Engineering and Mechanics
• /
• v.84 no.1
• /
• pp.17-33
• /
• 2022

An experimental study is carried out to investigate the performance of the cutting tool regarding the insert wear, surface roughness, cutting forces, cutting power and material removal rate of three coated carbides GC2015 (TiCN-Al₂O₃-TiN), GC4215 (Al₂O₃-Ti(C,N)) and GC1015 (TiN) during the dry turning of AISI4140 steel. For this purpose, a Taguchi design (L₉) was adopted for the planning of the experiments, the effects of cutting parameters on the surface roughness (R_a), tangential cutting force (F_z), the cutting power (P_c) and the material removal rate (MRR) were studied using analysis of variance (ANOVA), the response surface methodology (RSM) was used for mathematical modeling, with which linear mathematical models were developed for forecasting of R_a, F_z, P_c and MRR as a function of cutting parameters (V_c, f, and a_p). Then, Multi-Objective Ant Lion Optimizer (MOALO) has been implemented for multi-objective optimization which allows manufacturers to enhance the production performances of the machined parts. Furthermore, in order to characterize and quantify the flank wear of the tested tools, some machining experiments were performed for 5 minutes of turning under a depth of 0.5 mm, a feed rate of 0.08 mm/rev, and a cutting speed of 350 m/min. The wear results led to a ratio (V_B-GC4215/V_B-GC2015) of 2.03 and (V_B-GC1015/V_B-GC2015) of 4.43, thus demonstrating the efficiency of the cutting insert GC2015. Moreover, SEM analysis shows the main wear mechanisms represented by abrasion, adhesion and chipping.

• Journal of Korea Society of Industrial Information Systems
• /
• v.29 no.1
• /
• pp.49-62
• /
• 2024

In this paper, a sustainable closed-loop supply chain (SCLSC) network model is proposed for domestic mobile phone industry. Economic, environmental and social factors are respectively considered for reinforcing the sustainability of the SCLSC network model. These three factors aim at minimizing total cost, minimizing total amount of CO₂ emission, and maximizing total social influence resulting from the establishment and operation of facilities at each stage of the SCLSC network model. Since they are used as each objective function in modeling, the SCLSC network model can be a multi-objective optimization problem. A mathematical formulation is used for representing the SCLSC network model and a hybrid meta-heuristic approach is proposed for efficiently solving it. In numerical experiment, the performance of the proposed hybrid meta-heuristic approach is compared with those of conventional meta-heuristic approaches using some scales of the SCLSC network model. Experimental results shows that the proposed hybrid meta-heuristic approach outperforms conventional meta-heuristic approaches.

• Journal of Power Electronics
• /
• v.11 no.1
• /
• pp.105-111
• /
• 2011

By having accurate knowledge of the magnetic field distribution and the thrust calculation in linear synchronous motors, assessing the performance and optimization of the motor design are possible. In this paper, after carrying out a performance analysis of a single-sided wound secondary linear synchronous motor by varying the motor design parameters in a layer model and a d-q model, machine single- and multi-objective design optimizations are carried out to improve the thrust density of the motor based on the motor weight and the motor efficiency multiplied by its power factor by defining various objective functions including a flexible objective function. A genetic algorithm is employed to search for the optimal design. The results confirm that an overall improvement in the thrust mean, efficiency multiplied by the power factor, and thrust to the motor weight ratio are obtained. Several design conclusions are drawn from the motor analysis and the design optimization. Finally, a finite element analysis is employed to evaluate the effectiveness of the employed machine models and the proposed optimization method.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.1
• /
• pp.225-231
• /
• 2003

In order to improve efficiency of a system with three-dimensional flow characteristics, this paper presents a new method that overcomes three-dimensional effects by using two-dimensional CFD and response surface method. The method was applied to shape optimization of cut-off in a multi-blade fan/scroll system. As the entrance conditions of two-dimensional CFD, the experimental values at the positions out of the inactive zone were used. In order to examine the validity of the two-dimensional CFD the distributions of velocity and pressure obtained by two-dimensional CFD were compared with those of three-dimensional CFD and experimental results. It was found that the distributions of velocity and pressure show qualitatively similarity. The results of two-dimensional CFD were used for constructing the objective function with design variables using response surface method. The optimal angle and radius of cut-off were determined as $72.4^{\circ}$ and 0.092 times the outer diameter of impeller, respectively. It is quantified the previous report that the optimal angle and radius of cut-off are approximately $72^{\circ}$ and 0.08 times the outer diameter of impeller, respectively.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.19 no.2 s.72
• /
• pp.115-124
• /
• 2006

The 1st and 2nd tension forces of the PSSC(Prestressed Steel and Concrete) grider constructed with commercial rolling beams and concrete are optimally designed. The design variables are the 1st and 2nd tension forces due to multi-step prestressing and live load. The objective function is set to the maximum live load. Design conditions are allowable stresses at the top and bottom of slab, beam and infilled concrete due at the several construction stages. A Matlab based optimization program is developed. The results show that the tendon position as well as concrete compression strength have significant influence on the beam strength.

• Proceedings of the IEEK Conference
• /
• 2003.07e
• /
• pp.1968-1971
• /
• 2003

We propose a knowledge-based algorithm for extracting an object boundary from low-quality image like the forward looking infrared image. With the multi-classes training data set, the global shape is modeled by multispace KL(MKL)[1] and curvature model. And the objective function for fitting the deformable boundary template represented by the shape model to true boundary in an input image is formulated by Bales rule. Simulation results show that our method has more accurateness in case of multi-classes training set and performs better in the sense of computation cost than point distribution model(PDM)[2]. It works well in distortion under the noise, pose variation and some kinds of occlusions.

• Korean Institute of Interior Design Journal
• /
• no.29
• /
• pp.86-93
• /
• 2001

This study presents about the method of alternatives selection by considering wall performance and interior design. Wall is selected fur the object and 3 items of cost, performance, and design as the objective function for optimizing are determined. Thus the wall performance selected problems, which are improvement of insulation performance, sweaty prevention, sound insulation performance and design selected problems, which is satisfactory Improvement of users about Interior design. It is important to select alternatives that can satisfy the performance and design on the capital given as much as possible. But quantitative problem such as performance or expanses and qualitative problem such as design are not in the same dimension. Therefore this problem is a multi-criteria optimization problem and also has used AHP method as the method to solve these. Moreover GA is used to solve a problem of the alternatives occurrence, which is the characteristic of multi-criteria problem. This study presents the solution method on multi-criteria problem that has been mix loaded of quantitative problem and qualitative problem by using AHP(Analytic Hierarchy Process) and GA(Genetic Algorithm).

• Journal of the Ergonomics Society of Korea
• /
• v.34 no.6
• /
• pp.563-581
• /
• 2015

Objective: This study was conducted to investigate the potential of sematic network analysis for design research. Background: As HCD (Human-Centered Design) was emphasized, lots of design research methodologies were developed and used in order to find user needs. However, it is still difficult to discover users' latent needs. This study suggests the semantic network analysis as a complementary means for design research, and proved its potential through the practical application, which compares multi-screen purchase and usage behaviors between America and China. Method: We conducted an in-depth interview with 32 consumers from USA and China, and analyzed interview texts through semantic network analysis. Cross cultural differences in purchase and usage behaviors were investigated, based on measuring centrality and community modularity of devices, functions, key buying factors and brands. Results: Americans use more services and functions in the multi-screen environment, compared to Chinese. As a device substitutes other devices, traditional boundaries of the devices are disappearing in the USA. Americans consider function to recall Apple, but Chinese consider function, design and brand to recall Apple, Sony and Samsung as an important brand at the time of their purchase. Conclusion: This study shows the potential of semantic network analysis for design research through the practical application. Semantic network analysis presents how the concepts regarding a theme are structured in the cognitive map of users with visual images and quantitative data. Therefore, it can complement the qualitative analysis of the existing design research. Application: As the design environment becomes more and more complicated like multi-screen environment, semantic network analysis, which is able to provide design insights in the intuitive and holistic perspective, will be acknowledged as an effective tool for further design research.

• Journal of Korean Association for Spatial Structures
• /
• v.5 no.3 s.17
• /
• pp.83-89
• /
• 2005

This paper provides the results of the investigation on the optimum topology of simply supported deep beam structures with multi-point load cases. In this study, the strain energy to be minimized is considered as the objective function and the initial volume of structures is used as the constraint function. The resizing algorithm based on the optimality criteria is adopted to update the hole size existing inside the material. In this study, the sensitivities of topology optimization parameters to the optimum topology of the deep bean structures is investigated and also the effect of filtering process on the optimum topology is thoroughly tested. From numerical tests, the optimum topology of the deep beam is closely related with the optimization parameters used in the iteration and the filtering process play important role in order to find the optimum topology of the deep beam.