• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.337-341
• /
• 2010

최근들어 기상 이변에 따라 단시간에 집중되는 국지호우로 인하여 돌발홍수(Flash Flood)에 의한 피해가 빈번하게 발생하고 있다. 대하천의 경우에는 각 홍수 통제소에 의한 홍수 예경보 시스템(Flood Warning System)을 통하여 본류 구간에서의 인명 및 재산 피해가 과거에 비하여 상당히 감소하였으나 소하천에서는 반대로 피해가 증가하고 있는 실정이며, 따라서 돌발홍수에 대한 대비의 필요성이 증대되고 있는 실정이다. 본 연구에서는 돌발홍수로 인한 인명 및 재산 피해를 최소화하기 위하여 산지유역의 돌발홍수 발생 위험도를 평가할 수 있는 방법론을 제시하였다. 돌발홍수 위험도를 평가하기 위하여 고려되는 요소들로는 유역경사, 하천경사, 강우특성 등이며, 이러한 서로 다른 단위의 평가요소들을 종합적으로 고려하기 위하여 다기준의사결정방법 중 하나인 PROMETHEE 기법을 이용하였다. 주요 평가 인자들은 크게 지형특성, 지역특성 및 강우특성으로 구분되며, 각 평가 요소들간의 상대적인 가중치의 산정은 엔트로피 이론을 이용하였다. 본 연구에서 제안된 위험도 평가 방법은 그 적용성을 검증하기위하여 17개의 소유역들을 포함하고 있는 봉화군 유역에 적용되었다. 적용 결과 봉화군 유역 내 17개의 소유역들은 돌발홍수에 대한 상대적인 위험도에 따라 고 중 저위험군으로 분류되었으며, 과거 돌발홍수로 인한 피해 이력이 있는 소유역이 고위험군에 속해있는 결과를 나타냄으로써 본 연구의 방법론에 대한 적용성이 검증되었다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.798-802
• /
• 2010

The integration of GIS and fuzzy MCDA(Multi-Criteria Decision Analysis) allows the engineer to determine the preferred alternative for each spatial location in the study area. The next step is to recommend to the final decision makers a single flood management alternative for the entire region. Note that if the study area is large, it might be possible to use the kind of information to recommend different alternatives for different portions of the region. However, for this study it is assumed that only a single alternative will be used. In this study, a "cost of uniformity" metric is proposed that allows decision makers to compute the impact of selecting a single alternative for the entire floodplain. This metric represents the increase in the average distance metric value as compared to the spatially diverse solution from the MCDA and GIS analysis. The results could be applied to any region of the floodplain as desired. Whether the decision makers decide to apply these calculations to the entire floodplain or to specific important regions within the floodplain, an analysis of the increases in the cost of uniformity provides an integrated way for the decision maker to rank the alternatives. This should provide an improvement in their engineering analysis.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.10A
• /
• pp.1512-1520
• /
• 2000

The wireless communication network is evolving toward IMT-2000 for providing various multimedia services. In order to accomplish this ultimate goal the effective schemes are required which can dynamically utilize the limited wireless resources based on different traffic characteristics of various services. This paper proposes a novel bandwidth allocation and call admission control scheme to transmit multimedia traffic based on the bandwidth reservation procedure using direction estimation in the IMT-2000 This scheme estimates the position of mobiles based on the mliticriteria decision making in which uncertain parameters such as RSS(Received Signal Strength), the distance between mobile and base station the moving direction and the previous location are participated in the decision process using aggregation function in fuzzy set theory. Its effectiveness is investigated by simulation.

• Advances in materials Research
• /
• v.5 no.2
• /
• pp.67-80
• /
• 2016

The objective of the present work is to optimize process parameters namely, cutting speed, feed rate, and depth of cut in milling of AISI 304 stainless steel. In this work, experiments were carried out as per the Taguchi experimental design and an $L_{27}$ orthogonal array was used to study the influence of various combinations of process parameters on surface roughness (Ra) and material removal rate (MRR). As a dynamic approach, the multiple response optimization was carried out using grey relational analysis (GRA) and desirability function analysis (DFA) for simultaneous evaluation. These two methods are considered in optimization, as both are multiple criteria evaluation and not much complicated. The optimum process parameters found to be cutting speed at 63 m/min, feed rate at 600 mm/min, and depth of cut at 0.8 mm. Analysis of variance (ANOVA) was employed to classify the significant parameters affecting the responses. The results indicate that depth of cut is the most significant parameter affecting multiple response characteristics of GFRP composites followed by feed rate and cutting speed. The experimental results for the optimal setting show that there is considerable improvement in the process.

• Journal of the Korean Institute of Landscape Architecture International Edition
• /
• no.2
• /
• pp.130-139
• /
• 2004

Shiwha Lake is an excellent example of a body of water restored from a state of heavy pollution to a cleaner and more ecological state. This paper will explore techniques and methods available to landscape planning for the creation of new migratory birds habitats in Shiwha Lake. Because Shiwha lake is located adjacent to a new industrial site on reclaimed land, any planning effort aimed at restoring bird habitats must carefully consider the existing context. This plan had 3 goals; (1) to restore the coastal environment, (2) to create a habitat for migratory birds, and (3) to administer environmental education programs. To achieve these goals, several objectives were determined and planning criteria were proposed for topology, water environment(fresh, brackish and salt water swamps), zoning(for experts and general visitors), circulations, planting and mounding. The flora and fauna of the site was surveyed, and 5 alternatives were suggested and compared in several aspects. Planting species were carefully selected considering target birds and habitat requirements. In order to increase bio-diversity of the site, the plan proposed multi-staired mounds and extensive drainage systems. Bird watching facilities with natural materials, and the remote observing system using CCTV and the internet were some of the ecological techniques recommended by the plan. The bird watching trails are divided into two different zones for experts and general visitors.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.4
• /
• pp.756-765
• /
• 2001

An effective dexterous motion control method of redundant robot manipulators based on neural optimization network is proposed to satisfy multi-criteria such as singularity avoidance, minimizing energy consumption, and avoiding physical limits of actuator, while performing a given task. The method employs a neural optimization network with parallel processing capability, where only a simple geometric analysis for resolved motion of each joint is required instead of computing of the Jacobian and its pseudo inverse matrix. For dexterous motion, a joint geometric manipulability measure(JGMM) is proposed. JGMM evaluates a contribution of each joint differential motion in enlarging the length of the shortest axis among principal axes of the manipulability ellipsoid volume approximately obtained by a geometric analysis. Redundant robot manipulators is then controlled by neural optimization networks in such a way that 1) linear combination of the resolved motion by each joint differential motion should be equal to the desired velocity, 2) physical limits of joints are not violated, and 3) weighted sum of the square of each differential joint motion is minimized where weightings are adjusted by JGMM. To show the validity of the proposed method, several numerical examples are illustrated.

• Journal of the Korean Geosynthetics Society
• /
• v.13 no.4
• /
• pp.69-75
• /
• 2014

The shear strength characteristics of an unsaturated earth material are highly important not only for evaluating the seepage characteristics but also the stability of levee for a lifelong. In this study, unsaturated strength characteristics of Nak-dong river sand and clay that frequently used for the levee construction in southern province of Korea were analyzed using unsaturated triaxial compressive test. The strength characteristics due to the variation of matric suction were analyzed using multi-stage compression technique and the results were directly compared with the non-linear formulation for the apparent cohesion ($C_{max}$), and the friction component ${\varphi}^b$ were determined and evaluated from the test for the application of linear Mohr-Coulomb failure criteria. Cohesion and friction characteristics of the unsaturated levee material under various suction phases were also explored during this study.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.227-227
• /
• 2012

본 연구는 수자원계획 문제에서 다기준 의사결정기법을 적용할 때 발생할 수 있는 두 가지 문제에 대해 분석하였다. 첫 번째는 다기준 의사결정기법 선택의 차이가 결과에 어느 정도 영향을 미칠 수 있는지를 제시하였고 두 번째는 평가기준에 대한 가중치와 대안들의 평가치에 대한 불확실성을 최소화하기 위해 민감도 분석을 수행하는 절차를 제시하였다. 첫 번째 문제를 위해 가중합계법, Compromise Programming, 계층화분석과정, 수정된 계층화 분석과정, 가중곱방법, TOPSIS, ELECTRE-2, Regime 방법을 사용하였다. 또한 최근 사용빈도가 높은 삼각형 Fuzzy 숫자와 다기준 의사결정기법을 결합한 기법에 대해서도 분석하였는데 Fuzzy WSM, Fuzzy 계층화분석과정, Fuzzy 수정 계층화분석과정, Fuzzy TOPSIS, Fuzzy Compromise Programming을 검토하였다. 분석결과 평가기준에 대한 가중치 조건과 표준화 방법이 동일한 상황에도 불구하고 조금씩 다른 순위를 제시하는 것으로 나타났다. 또한 다양한 MCDM 기법들을 적용해도 동일한 순위로 나타나는 대안들이 있었다. 따라서 다기준 의사결정기법을 사용한 수자원 관리계획을 수립할 때에는 다양한 분석기법을 활용해서 기법의 선택으로 인한 불확실성을 최소화해야 한다. 두 번째 문제는 평가기준에 대한 가중치와 대안의 효과 정량화 자료의 불확실성을 극복하기 위해 각각에 대한 민감도 분석을 수행하였다. 본 연구는 유량확보와 수질개선을 위한 수자원 계획 수립을 위해 가중합계법을 이용한 문제에 두 경우의 민감도 분석을 모두 수행하였다. 이 과정에서 결정계수와 민감도 계수를 산정하여 이용하였다. 본 연구는 향후 수자원 관리 및 계획 분야에서 다기준 의사결정기법을 적용할 때 사용될 수 있는 기초 가이드라인이 될 것이다.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.11 s.104
• /
• pp.1223-1231
• /
• 2005

Recently, the issue of ship nitration due to the large scale, high speed and lightweight of ship is emerging. For pleasantness in the cabin, shipbuilders are asked for strict vibration criteria and the degree of nitration level at a deckhouse became an important condition for taking order from customers. This study proposes a new optimization framework that is NASTRAN external call type optimization method (OptShip) and applies to an optimum design to decrease the nitration level of a deckhouse. The merits of this method are capable of using of global searching method and selecting of various objective function and design variables. The global optimization algorithms used here are random tabu search method which has fast converging speed and searches various size domains and genetic algorithm which searches multi-point solutions and has a good search capability in a complex space. By adapting OptShip to full-scale model, the validity of the suggested method was investigated.

• The Journal of Industrial Distribution & Business
• /
• v.4 no.2
• /
• pp.41-49
• /
• 2013

Purpose - Currently, the distribution environment has been changing rapidly because of the advent of super-supermarkets (SSM),which adopt the "price break" and "lowest price" strategies. Specifically, a diversification of the distribution environment allowed customers to reasonably decide where to shop. With a broadened range of criteria governing the choice of a store, determining changes in the distribution environment should be based on customer satisfaction surrounding the service levels of SSMs. This study examines the effects of service quality and product quality of SSMs on customer satisfaction levels, and analyzes whether these factors affect customers' revisit intention directly. Research design and methodology - A survey method was used and 127 SSM customers responded to the questionnaires that were developed to measure service quality, product quality, customer satisfaction, and store revisit intention. A multi-regression analysis was used to test the hypotheses. Results - Except hypothesis 2, the other seven hypotheses were supported. Hypothesis 2 suggested a positive relationship between product factors and customer satisfaction. Conclusions - This study found a systematic effect of service factors and product factors on customer satisfaction and word-of-mouth, and consequently on store revisit intention.