• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.10
• /
• pp.1-8
• /
• 2000

In this paper, positioning schemes based on AOA(Angle of Arrival), TOA(Time of Arrival), and TDOA(Time Difference of Arrival) measurements are reviewed and analyzed. In the case of using those schemes in microcell structure with severe multipath fading and shadowing conditions, the rapid and unpredictable variation of signal level makes it difficult to estimate the position and velocity of mobiles. Therefore, we propose a novel mobile tracking method based on the multicriteria decision making, in which uncertain parameters such as RSS(Received Signal Strength), the distance between mobile and base station, the moving direction, and the previous location are participated in the decision process using aggregation function in fuzzy set theory. Through a simulation, we analysis the impaction of the frequent change of direction and speed of mobiles.

• International Journal of Concrete Structures and Materials
• /
• v.9 no.2
• /
• pp.185-206
• /
• 2015

This paper presents statistical models developed to study the influence of key mix design parameters on the properties of lightweight self-consolidating concrete (LWSCC) with expanded shale (ESH) aggregates. Twenty LWSCC mixtures are designed and tested, where responses (properties) are evaluated to analyze influence of mix design parameters and develop the models. Such responses included slump flow diameter, V-funnel flow time, J-ring flow diameter, J-ring height difference, L-box ratio, filling capacity, sieve segregation, unit weight and compressive strength. The developed models are valid for mixes with 0.30-0.40 water-to-binder ratio, high range water reducing admixture of 0.3-1.2 % (by total content of binder) and total binder content of $410-550kg/m^3$. The models are able to identify the influential mix design parameters and their interactions which can be useful to reduce the test protocol needed for proportioning of LWSCCs. Three industrial class ESH-LWSCC mixtures are developed using statistical models and their performance is validated through test results with good agreement. The developed ESH-LWSCC mixtures are able to satisfy the European EFNARC criteria for self-consolidating concrete.

• Journal of the Korea Institute of Building Construction
• /
• v.7 no.4
• /
• pp.145-151
• /
• 2007

In this paper, tests are carried out in order to investigate the strength development of concrete under various binder types, W/B and curing temperature ranged from $5{\sim}20^{\circ}C$. Fly ash and blast furnace slag were incorporated by as much as 30%, respectively. Strength development of concrete are estimated using Logistic model and strength ratio of concrete at 28days to that at early age are also investigated. According to experimental results, it is found that good agreements are obtained between measured values and calculated ones using logistic model below $20^{\circ}C$. Strength ratio of concrete at 28days to that at early age increases in case W/B decreases and curing temperature increases. Tables and graphs for strength ratio of concrete are provided in this paper. It is capable of obtaining and predicting the periods to attain design strength by considering increment factor of strength easily with the table and graphs presented in this paper. This paper presents the reference data to decide removal time of form, time to reach target strength and strength inspection of remicon whether the test specimens meet the specified criteria of compressive strength. Multi regression models with respect to the relationship between 7days compressive strength and 28 days compressive strength depending on W/B and admixture types are presented.

• Journal of Environmental Impact Assessment
• /
• v.2 no.2
• /
• pp.59-71
• /
• 1993

Evaluation methods are employed in environmental impact assessment to choose between different project site, to determine the required measures to compensate impact and to decide whether the environmental impacts are more important than the social or economic effects of a project. The main obstacles that restrict use of quantitative evaluation method are a Lack of knowledge about the environmental effects (e.g. if impacts on wildlife or landscape amenities are predicted) and the relative importance of economic and social issues compared with nature conservation stability of ecosystem or landscape beauty. In Germany, the most common method for site planning is the "ecological risk analysis". It is a kind of multi-criteria-decision-method based on quantitative and qualitative description and ordinal ranking. The various kinds of "ecological balancing methods" that are more recently developed (within the last decade) to quantify the required amount for compensatory measures instead often use cardinal figures to express the value of ecosystems, the intensity of impacts, the need for additional measures to compensate for long recuperative periods when restoring ecosystems and so on. There are still only a view attempts to quantify decisions between environmental and socio-economic issues. Multicriteria-analysis as well as cost-benifit-analysis was used. Some new approaches which are still in a preliminary status are based on contingent valuation and on calculations for compensatory payments (instead of compensatory measures).

• Journal of the Korean Society of Clothing and Textiles
• /
• v.36 no.2
• /
• pp.138-151
• /
• 2012

This study determines a consumer retail store choice by applying the Analytic Hierarchy Process (AHP) method for multi-criteria decision-making in the fashion retail industry. The study provides detailed and relevant information for management, marketers of fashion retail stores, and to improve competition between suppliers. Data was collected in February 2011 from questionnaires completed by 319 university students in Busan, South Korea. One of the major findings of this study was that consumer store preference was affected by the following factors in order of importance: product, image, service quality, and purchase facilitation. Brand image was assessed to be the most important of the evaluation elements, followed by individuality, style, and price. The results of rating the relative importance and priority of fashion retailers showed that department stores ranked most highly, followed by outlet malls, Internet shopping malls, brand malls, and discount stores.

• The Journal of Korean Physical Therapy
• /
• v.27 no.6
• /
• pp.434-438
• /
• 2015

Purpose: The purpose of this study was to determine the effects of calcaneal taping on peak plantar pressure of rearfoot and forefoot while walking. Methods: Fifteen healthy subjects with normal feet participated in this study. Inclusion criteria were as follows: (1) no disturbance of gait and foot pain, (2) normal range of motion of ankle joint, (3) no foot deformity. Pedoscan was used for recording of plantar pressure data during walking. The participants walked along a 12-m walkway before and after application of calcaneal taping. The plantar pressure gait was measured 3 times under barefoot and calcaneal taping conditions randomly at a speed practiced with the metronome during gait. The peak plantar pressure data were calculated for medial and lateral areas of the rearfoot and forefoot. The paired t-test was used to determine significant differences in peak plantar pressure of rearfoot and forefoot before and after application of calcaneal taping. A p-value less than 0.05 was accepted as significant. Results: The calcaneal taping resulted in statistically significant decreases in peak plantar pressure of the rearfoot (medial side: p=0.03; lateral side: p=0.01). However, there were no significant changes in peak plantar pressure of the forefoot (medial side: p=0.45; lateral side: p=0.40). Conclusion: The calcaneal taping is recommended to reduce plantar pressure of the rearfoot in weight-bearing activities in subjects with plantar heel pain caused by atrophy of the fat pad.

• Journal of Korean Society for Quality Management
• /
• v.42 no.2
• /
• pp.131-143
• /
• 2014

Purpose: This paper discusses the intrinsic assumption of one-dimensional relationship between the upper and lower levels in AHP(Analytic Hierarchy Process) for the Preliminary Feasibility Study of National R&D Program. This assumptions has not been questioned in academia and industry so far. Methods: This discussion is induced by understanding the Theory of Attractive Quality (Kano et al. 1984) and explains the limitation of AHP in the preliminary feasibility study of national R&D program. Results: In this paper, we propose a new questioning method based on two dimensional perspective, which is named as 2D-AHP (two dimensional AHP), to overcome the limitation. The main idea stems from the observation that the relationship between the upper and lower levels in AHP can vary depending on the subject of R&D. Conclusion: The two dimensional perspective pointed out in this paper should be more deeply studied in the field of MCDM(multi-criteria decision making) since it can be applied to the more general problems in human decision making.

• Journal of Korean Society of Water and Wastewater
• /
• v.24 no.2
• /
• pp.183-193
• /
• 2010

Well planned rehabilitation order of pipes is essential for efficient maintenance and management of Water Distribution Systems. In this study, not only deterioration rate of pipes but also structural and nonstructural failure which causes abnormal condition of WDS is considered to determine rehabilitation order. Probabilistic Neural Network is used for calculating deterioration rate at present and the importance of pipes is computed under structural and nonstructural failure by using Pipe by Pipe Failure Analysis and Effect Index. Utopian Approach, one of the Multi-Criteria Decision Making methods, is used for assessment of final rehabilitation order based on distance measure between utopian point and alternative one. Developed model in this study shows that it gives more reliable results than existing methods considering hydraulic relative importance does in application to real networks. In this point, the newly developed model, which gives advantages over existing models, can make a credible decision and simple application.

• Journal of Korean Society of Rural Planning
• /
• v.9 no.4 s.21
• /
• pp.43-51
• /
• 2003

This study aims to integrate the simulation models for rural settlement planning (SimRusep) in the district level (Myon) area of rural counties. The SimRusep, which has two modules of key villages selection and spatial planning for the selected villages, consists of four sub-models such as the spatial location-allocation model of center villages (SLAMCV), the potential centrality evaluation model (PCEM), the land use planning model (LUPM), and the 3-dimensional spatial planning modeller (3DSPLAM). Basically, map data of the integrated system which can be operated on the UNIX environment is inputted and treated using GIS (ARC/INFO) and then its village planning results is graphically presented on the AutoCAD. In order to verify the practical applicabilities of the SimRusep, an administrative area, Ucheon-myun, HoengSung-gun, KangWon-do, was selected as a case study area. It was well operated in the strategic application trials considering application of each sub-model in the study area. The operation results of the SimRusep showed the possibilities of realtime simulation from the selection of key village to its final stereoscopic presentation of planned results. Alternative village plan proposals can be swiftly drafted, which means very practical support for decision making process and public participation.

• Biomedical Science Letters
• /
• v.16 no.3
• /
• pp.169-177
• /
• 2010

Osteoporosis is a disease that increases the fracture rates and a major cause of increased mortality and morbidity in the elderly people. This study is to determine which components of body composition and metabolic syndrome risk factors are important to bone health, we analysed the relationship among bone mineral density (BMD), body composition and metabolic syndrome risk factors in females. Totally 630 females participated in a medical check-up program (mean age 47 years) were selected for this study. Body composition analysis was performed by segmental bioelectrical impedance method, muscle mass, and percent body fat were measured. We also measured metabolic syndrome risk factors including abdominal obesity, HDL-cholesterol, triglyceride, blood pressure and fasting glucose level. Metabolic syndrome was defined by NCEP-ATP III criteria. The lumbar spine and femoral neck BMD were measured using the dual energy X-ray absorptiometry. Osteopenia and osteoporosis were observed in 180 and 51 persons, respectively. Muscle mass and HDL-cholesterol decreased in osteopenia and osteoporosis groups compared to the control group, and the grade was shown progressively by the symptoms. Significant positive correlation between BMD and muscle mass was observed. Multi variable regression analyses showed that % body fat and muscle mass were independent predictors of BMD after adjustment of age, height and weight. In conclusion, the BMD showed negative correlation with the metabolic and body composition was associated with BMD.