• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.21 no.1
• /
• pp.165-173
• /
• 2023

Various linear system solvers with multi-physics analysis schemes are compared focusing on the near-field region considering thermal-hydraulic-chemical (THC) coupled multi-physics phenomena. APro, developed at KAERI for total system performance assessment (TSPA), performs a finite element analysis with COMSOL, for which the various combinations of linear system solvers and multi-physics analysis schemes should to be compared. The KBS-3 type disposal system proposed by Sweden is set as the target system and the near-field region, which accounts for most of the computational burden is considered. For comparison of numerical analysis methods, the computing time and memory requirement are the main concerns and thus the simulation time is set up to one year. With a single deposition hole problem, PARDISO and GMRES-SSOR are selected as representative direct and iterative solvers respectively. The performance of representative linear system solvers is then examined through a problem with an increasing number of deposition holes and the GMRES-SSOR solver with a segregated scheme shows the best performance with respect to the computing time and memory requirement. The results of the comparative analysis are expected to provide a good guideline to choose better numerical analysis methods for TSPA.

• 한국전산유체공학회:학술대회논문집
• /
• 2003.10a
• /
• pp.240-242
• /
• 2003

A method for performing two-dimensional lift-constraint drag minimization in inviscid compressible flows on unstructured meshes is developed. Sensitivities of objective function with respect to the design variables are efficiently obtained by using a continuous adjoint method. In addition, parallel algorithm is used in multi-point design optimization to enhance the computational efficiency. The characteristics of single-point and multi-point optimization are examined, and the comparison of these two method is presented.

• 한국연소학회:학술대회논문집
• /
• 2012.04a
• /
• pp.275-278
• /
• 2012

We investigate the interaction between the propagation of detonation and inserted gaps in the high explosive. The Eulerian-based multi-material simulation code validated through comparison with experimental results was used. A series of gap materials is used to understand the detonation propagation characteristic in the presence of multiple gaps.

• International Journal of Highway Engineering
• /
• v.19 no.1
• /
• pp.73-80
• /
• 2017

PURPOSES : This paper presents a comparison study between dynamic and static analyses of falling weight deflectometer (FWD) testing, which is a test used for evaluating layered material stiffness. METHODS: In this study, a forward model, based on nonlinear subgrade models, was developed via finite element analysis using ABAQUS. The subgrade material coefficients from granular and fine-grained soils were used to represent strong and weak subgrade stiffnesses, respectively. Furthermore, the nonlinearity in the analysis of multi-load FWD deflection measured from intact PCC slab was investigated using the deflection data obtained in this study. This pavement has a 14-inch-thick PCC slab over fine-grained soil. RESULTS: From case studies related to the nonlinearity of FWD analysis measured from intact PCC slab, a nonlinear subgrade model-based comparison study between the static and dynamic analyses of nondestructive FWD tests was shown to be effectively performed; this was achieved by investigating the primary difference in pavement responses between the static and dynamic analyses as based on the nonlinearity of soil model as well as the multi-load FWD deflection. CONCLUSIONS : In conclusion, a comparison between dynamic and static FEM analyses was conducted, as based on the FEM analysis performed on various pavement structures, in order to investigate the significance of the differences in pavement responses between the static and dynamic analyses.

• Journal of Digital Convergence
• /
• v.15 no.6
• /
• pp.535-543
• /
• 2017

This study aimed to improve the satisfaction of multi-cultural children by encouraging their participation in healthy exercises, and confirm the level of changes in their school life, the satisfaction with happiness. In order to achieve this purpose, dividing the participants in this program into an experimental group of 20 who participate in taekwondo training program and a comparison group of 20 who do not do sports activity, the study was conducted with a binary mixed design by three repeated measures by group. The conclusions made through these measures were as follows: According to the measurement time between the experimental group who participated in taekwondo training program and the comparison group who did not do sports activity, there were differences in changes in satisfaction of school life, leisure satisfaction, and satisfaction with happiness. Namely, the change in the experimental group was more than that of the comparison group. In conclusion, for multi-cultural children, it can be assessed that as the duration of participation in the taekwondo training program increases, the effect was clear, and it was found that satisfaction of school life, leisure satisfaction, and happiness satisfaction have changed statistically and significantly.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.10 no.3
• /
• pp.8-16
• /
• 2014

Heating and hot water supply energy consumption of medium and multi boiler systems applied to military officer housing are compared with in-situ experiment and TRNSYS dynamic simulation program. In a multiple boiler system, small capacity boilers are connected in parallel to meet the required capacity. For handling partial loads, medium capacity boiler relies on on-off control, while multi boiler adopts PI control. Since multi boiler has higher efficiency and better control strategy, the results show that energy consumption can be reduced significantly with the multi boiler system.

• Architectural research
• /
• v.19 no.3
• /
• pp.63-70
• /
• 2017

The purpose of this study was to examine the effect of housing units assembled as complexes on residential satisfaction. Two analyses were performed to examine residential satisfaction of Multi-Family Housing Blocks (MFHB; complex) and Multi-Household Housing (MH; non-complex). The residents from both housing types were surveyed on nine categories of questions regarding residential satisfaction and one on overall satisfaction from their experiences. First, the t-test results between MFHB and MH suggest that MFHB has insufficient effect in terms of improvement over MH, as their satisfaction differences are either insignificant or uncontrollable. Second, the common factors affecting Overall Satisfaction of MFHB and MH are Maintenance and Residential Environments.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.490-490
• /
• 2013

In semiconductor industry, it is expected that plasma process which use 450 mm source will be used at next generation. However, main obstacle of the large area plasma source is plasma uniformity from it. When electrode is enlarged, field difference between center area and side area reduces the plasma uniformity [1-3]. Therefore we investigate multi-electrode which diminish this field difference.We designed two multi-electrode models. One has two segments and the other has five segments. Each multi-electrode model is connected with two power generator and two matchers. One generator and one matcher is connected with center electrode part. The other one generator and the other one matcher is connected with side electrode part. The ion density is measured at 29 points by using floating harmonic method [4-6]. After measuring the data of each multi-electrode model, we discuss the difference of profile between two models' data.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.10 no.16
• /
• pp.129-132
• /
• 1987

Multi-item inventory problems can be well characterized by the nature of interaction of the quantities and timing. This interaction may be due to the effect of certain combination of orders. It is that the set-up cost of ordering individual items can be saved by jointly ordering at a time. This study finds a decision criteria of optimum inventory policy through the comparisons of individual multi-item order policy(IMP), joint multi-item order policy(JMP), augmented multi-item order policy(AMP) in cost ratio. Subsequently we assume that there exists a unique optimum order level corresponding to an optimum reorder range for the augmented multi-item order, at which a cost saying is maximum.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.23 no.4
• /
• pp.306-313
• /
• 1994