• Journal of Advanced Navigation Technology
• /
• v.5 no.1
• /
• pp.37-44
• /
• 2001

In this paper, the channel environment for next generation ITS/DSRC which is developed for 10Mbps is modeled with ray tracing technique and, we analyzed BER of OFDM which has an advantage over reducing the effect of ISI with multi-carrier and guard time, occuping bandwidth on 6-ray channel environment. Also, we applied the one-tap equalizer to improve the performance of BER. In case only OFDM is applied with 32 sub-carrier, the result of BER is under $10^{-6}$ from 10 to 100m if $E_b/N_0$ is more than 23dB. But in case OFDM and one-tap equalizer are applied with 32 sub-carrier, $E_b/N_0$ is required of about 17dB to achieve BER under $10^{-6}$.

• Journal of Navigation and Port Research
• /
• v.38 no.4
• /
• pp.343-348
• /
• 2014

A routing scheme called MCS-NLTC using a self-configuration marine network model and the diversity and heterogeneity of broadband wireless access technologies is newly proposed. The MCS-NLTC algorithm selects optimal nodes and carriers for every hop in optimal routes based on not conventional hop counts but normalized distances to destination ships (location information of destination ships). Normalized transmission characteristics of applications and carriers are considered to get optimal routes as well. The location information enhances convergence speed to get destinations, which makes the route search time faster. Evaluated performances are compared with those of the schemes based on max-win (OMH-MW), and normalized transmission characteristics (MCS-NTC).

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.3 s.94
• /
• pp.319-326
• /
• 2005

In the multi-carrier OFDM communication system for the high data rate transmission, the ICI caused by phase noise of transceiver local oscillator may degrade the system performance seriously. In this paper, a new ICI self-cancellation scheme using data-conjugate method is proposed to reduce the ICI caused by phase noise effectively. Then, the CPE, ICI and CIR are derived by the phase noise linear approximation method. Besides, to analyze the efficiency of system performance improvement, the proposed method is compared with the original OFDM and the conventional ICI self-cancellation scheme using data-conversion method. As results, the performance degradation caused by ICI can be mitigated effectively in the OFDM system with ICI self-cancellation scheme, and more performance improvement can be achieved by the proposed ICI self-cancellation scheme using data-conjugate method than the conventional ICI self-cancellation scheme using data-conversion method when phase noise exists.

• The Journal of Information Technology
• /
• v.5 no.4
• /
• pp.1-8
• /
• 2002

This thesis is about power line communication(PLC) over the low voltage grid. The main advantage with power line communication is the use of an existing infrastructure. The PLC channel can be modeled as having multi-path propagation with frequency-selective fading, typical power lines exhibit signal attenuation increasing with length and frequency. OFDM(Orthogonal Frequency Division Multiplexing) is a modulation technique where multiple low data rate carriers are combined by a transmitter to form a composite high data rate transmission. To implement the multiple carrier scheme using a bank of parallel modulators would not be very efficient in analog hardware. Each carrier in an OFDM is a sinusoid with a frequency that is an integer multiple of a base or fundamental sinusoid frequency. Therefore, each carrier is a like a Fourier series component of the composite signal. In fact, it will be shown later that an OFDM signal is created in the frequency domain, and then transformed into the time domain via the Discrete Fourier Transform(DFT).

• The Journal of Information Technology
• /
• v.6 no.2
• /
• pp.1-8
• /
• 2003

This paper is about power line communication(PLC) over the low power voltage grid. The main advantage with power line communication is the use of an existing infrastructure. The PLC channel can be modeled as having multi-path propagation with frequency-selective fading, typical power lines exhibit signal attenuation increasing with length and frequency. OFDM(Orthogonal Frequency Division Multiplexing) is a modulation technique where multiple low data rate carriers are combined by a transmitter to form a composite high data rate transmission. To implement the multiple carrier scheme using a bank of parallel modulators would not be very efficient in analog hardware. Each carrier in an OFDM is a sinusoid with a frequency that is an integer multiple of a base or fundamental sinusoid frequency. Therefore, each carrier is a like a Fourier series component of the composite signal. In fact, it will be shown later that an OFDM signal is created in the frequency domain, and then transformed into the time domain via the Discrete Fourier Transform(DFT).

• Elastomers and Composites
• /
• v.58 no.1
• /
• pp.44-56
• /
• 2023

Additive manufacturing (AM) or three-dimensional (3D) printing of metals has been drawing significant attention due to its reliability, usefulness, and low cost with rapid prototyping. Among the various AM technologies, fused deposition modeling (FDM) or fused filament fabrication is receiving much interest because of its simple manufacturing processing, low material waste, and cost-effective equipment. FDM technology uses metal-filled polymer filaments for 3D printing, followed by debinding and sintering to fabricate complex metal parts. An efficient binder is essential for producing polymer filaments and the thermal post-processing of printed objects. This study involved an in-depth investigation of and a fabrication route for a novel multi-component binder system with steel alloy powder (45 vol.%) ranging from filament fabrication and 3D printing to debinding and sintering. The binder system consisted of polyvinyl pyrrolidone (PVP) as a binder and thermoplastic polyurethane (TPU) and polylactic acid (PLA) as a carrier. The PVP binder held the metal components tightly by maintaining their stoichiometry, and the TPU and PLA in the ratio of 9:1 provided flexibility, stiffness, and strength to the filament for 3D printing. The efficacy of the binder system was examined by fabricating 3D-printed cubic structures. The results revealed that the thermal debinding and sintering processes effectively removed the binder/carrier from the cubic structures, resulting in isotropic shrinkage of approximately 15.8% in all directions. The scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDX) patterns displayed the microstructure behavior, phase transition, and elemental composition of the 3D cubic structure.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.44 no.5
• /
• pp.45-53
• /
• 2007

To recover transmitted signal perfectly at DTV receiver, we have to acquire carrier frequency synchronization to compensate pilot signal which located in wrong position and rotated phase. Also, we need a symbol timing synchronization to compensate sampling timing error. Conventionally, to synchronize symbol timing, we use Gardner's scheme which used in multi-level signal. Gardner's scheme is well known for its sampling the timing error signal from every symbol and it makes easy to detect and keep timing sync in multi-path channel. In this paper, to discuss the problem when the received power level is out of range and we cannot get synchronization information. With this problem, we use 2 step procedures. First, we put a received signal power compensation block before Garder's timing error detector. Second, adaptive loop filter to get a fast synchronization information and averaging loop filter's output value to reduce the amount of jitter after synchronization in PLL(Phased Locked Loop) circuit which is used to get a carrier frequency synchronization and symbol timing synchronization. Using the averaging value, we can estimate offset. Based on offset changing ratio, we can adapt adaptive loop filter to carrier frequency and symbol timing synchronization circuit.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.11 no.6
• /
• pp.44-49
• /
• 1974

reactance modulator composed of multi-stage phase modulator utilizing VVC diodes as variable reactance elements and an oscillartor-modulator, utilizing a VVC diode as a tuning element, coupled to a crystal resonator through an artificial λ/4 network are introduced and their characteristics as FM modulator are compared mutually from the practical view points. especially, to get high modulation sensitivity of reactance modulators using VVC diodes, making a multi-stage modulation distortion characteristics of multi-stage modulator was necessary. The harmonic moj\dulationdistorion characteristics of multi-stage reactance modulator is analized in detall. Multi-stage reachance modulator is preferable to maintain sufficiently stable carrier frequency over the wide range of temperature and a mobile-transceiver was made through this method. On the other hand, FM-Quartz oscillator using a VVc diode is suitavle for handy-talkies of good quality were made through this method.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.1
• /
• pp.23-28
• /
• 2016

In this paper, a Multi-Band Ku-band down converter was designed for reception of multi-band digital satellite broadcasting. The Multi-band low-nose down converter was designed to form four local oscillator frequencies (9.75, 10, 10.75 and 11.3GHz) representing a low phase noise due to VCO-PLL with respect to input signals of 10.7 to 12.75GHz and 3-stage low noise amplifier circuit by broadband noise matching, and to select an one band of intermediate frequency (IF) channels by digital control. The developed low-noise downconverter exhibited the full conversion gain of 64dB, and the noise figure of low-noise amplifier was 0.7dB, the P1dB of output signal 15dBm, and the phase noise -73dBc@100Hz at the band 1 carrier frequency of 9.75GHz. The low noise block downconverter (LNB) for receiving four-band digital satellite broadcasting designed in this paper can be used for satellite broadcasting of vessels navigating international waters.

• The Journal of the Acoustical Society of Korea
• /
• v.22 no.4
• /
• pp.276-285
• /
• 2003

In this paper, we present real-time implementation of a R2MFC/DTMF (R2 Multi Frequency Combinations/Dual Tone Multiple Frequency) tone receiver/sender using a high performance DSP (Digital Signal Processor) and apply it to a carrier class VoIP (Voice over Internet Protocol) gateway system. The Receiver utilizes the Goertzel filter and the sender adopts the harmonic resonant filter. We describe, in detail, the techniques of multi-channel real-time implementation on a Texas Instruments TMS320C62x DSP such as effective PCM (Pulse Code Modulation) in/out by means of DMA (Direct Memory Access) and McBSP (Multi Channel Buffered Serial Port) and message communication via HPI (Host Port Interface), etc. From experimental results, we confirmed that the optimized code provided 780 channel capacity at 250㎒ C6202, and the our R2MFC/DTMF receiver/sender met ITU-T (International Telecommunication Union-Telecommunication) specifications.