• Journal of Korean Home Economics Education Association
• /
• v.11 no.2
• /
• pp.13-26
• /
• 1999

The goals of this research are for producing and optimizing the CD-ROM, effective and practical Teaching-Learning method. It consists of Wearing Korean Traditional Costume for the First Grade of Middle School Students in Home Economics Teaching. This research’s summarization is following. First, the multi-media material. CD-ROM making use of Powerpoint. Wearing Korean Traditional Costume, is produced to help the students learn the difficult contents in terms of video and audio. Second, it is introduced the model of Open Education for increasing the efficiency of class. Third, it is developed to proceed the class with the CD-ROM and small group study of place activity. Fourth, it helps students concentrate on the class with proper sound effect whenever the slide films are changed. And it helps to link the web sites related to Korean Traditional Costume. Finally, another kinds of suggestions are following. The effective verification of this software that is tested and applied at the field for a given period will be necessary. And, it is necessary to upgrade for the CD-ROM and the supplementary teaching materials in Korean Traditional Costume education.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.3
• /
• pp.451-456
• /
• 2020

In this paper, we studied the method of designing a embedded antenna for mounting on the JTDLS complete aircraft. The proposed antenna satisfies the MIDS-LVT operation frequency band and is designed as a broadband in consideration of expandability. As a result of the design, it was confirmed that the proposed antenna has similar electrical performance to the existing blade antenna and has broadband characteristics. As a result of EM analysis, the antenna was mounted on the top and bottom parts of the aircraft to check the mount of the aircraft, and it was confirmed that both the top and bottom parts had good radiation characteristics. The technology acquired through this study is judged to be applicable to the JTDLS completed aircraft.

• Journal of the Korean Data and Information Science Society
• /
• v.21 no.4
• /
• pp.783-793
• /
• 2010

Several multi-hop applications developed for vehicular ad hoc networks use broadcast as a means to either discover nearby neighbors or propagate useful traffic information to other vehicles located within a certain geographical area. However, the conventional broadcast mechanism may lead to the so-called broadcast storm problem, a scenario in which there is a high level of contention and collisions at the link layer due to an excessive number of broadcast packets. We present a fuzzy alert message dissemination algorithm to improve performance for road safety alert application in Vehicular Ad-hoc Network (VANET). In the proposed algorithm, when a vehicle receives an alert message for the first time, the vehicle rebroadcasts the alert message according to the fuzzy control rules for rebroadcast degree, where the rebroadcast degree depends on the current traffic density of the road and the distance between source vehicle and destination vehicle. Also, the proposed algorithm is the hybrid algorithm that uses broadcast protocol together with token protocol according to traffic density. The performance of the proposed algorithm is evaluated through simulation and compared with that of other alert message dissemination algorithms.

• Electronics and Telecommunications Trends
• /
• v.9 no.4
• /
• pp.23-34
• /
• 1994

직렬 접속 프로토콜은 두개 이상의 근거리 시스템간의 정보 교환에 사용된다. 현재까지 공식적인 기관에서 표준화되어 제정된 직렬 접속 규격들이 가지고 있는 성능은 전송 속도 측면에서 수 kbps에서 최대 10Mbps급에 한정되어 있는 관계로 수백 Mbps 혹은 수 Gbps급에 달하는 직렬 접속 프로토콜 성능을 요구하는 고성능 통신 및 정보 처리 시스템을 위한 새로운 직렬 접속 규격이 요구되고 있다. IEEE에서 표준화 작업중인 Multi-CPU 병렬 시스템을 위한 접속 규격인 P1355 접속 규격은 경제적이며 용이한 확장성을 가지는 칩과 칩간외에 보드와 보드간 혹은 랙과 랙간의 연결이 가능한 표준 규격안이다. P1355 접속 프로토콜은 특성이 서로 다른 DS, TS, HS link 규격들로 구성되어 있으며 이들은 선로 동작 속도 측면에서 각각 200Mbps, 250Mbps, 1Gbps의 성능을 가지고 있으며, 사용되는 데이터 심볼의 코딩 방식, 접속로 동작 초기화 및 오류 제어, 접속로의 물리적 성능 및 규격 등에서 차이를 가지고 있다. P1355는 일반적인 통신용 전송 선로에서 요구되는 물리 계층의 BER 성능보다 $10^5$에서 $10^10$배 향상된 선로 BER 특성과 이러한 하위 계층 특성을 바탕으로한 패킷 손실이 없는 간결한 상위계층 프로토콜을 특징으로 하며, 차세대 통신 수단인 ATM교환기 시스템의 서브 시스템 접속 규격으로 사용될 수 있다.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.11 no.1
• /
• pp.79-88
• /
• 2015

In this paper, it is investigated that the limitation due to the asymmetry of optical power and chromatic dispersion with respect to optical phase conjugator (OPC) for compensating optical signal distortion in WDM system is overcomed by using OPC position offset and optimal dispersion coefficients of fiber sections, which depend on OPC position offset. It is confirmed that overall WDM channels are efficiently compensated by applying the optimal parameter values obtained from the proposed method into 24 channels ${\times}40$ Gbps WDM system with non zero - dispersion shifted fiber (NZ-DSF) of 1, 000 km, such as power penalties of inter-channel are reduce to almost 3.5 dB from the infinite value. It is also confirmed that the flexible design of WDM system with OPC is possible by using the optimal parameters, in which OPC is placed at ${\pm}15km$ from 500 km for efficiently compensating overall channels. Thus, the methods proposed in this research will be expected to alternate with the method of making a symmetrical distribution of power and local dispersion in real optical link which generates a serious problem if it was not made but it is the condition in the case of applying the OPC into multi-channels WDM system.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.7
• /
• pp.2365-2382
• /
• 2014

While single-user spatial multiplexing multiple-input multiple-output (SU-MIMO) allows spatially multiplexed data streams to be transmitted to one node at a time, multi-user spatial multiplexing MIMO (MU-MIMO) enables the simultaneous transmission to multiple nodes. However, if the transmission time required to send packets to each node varies considerably, MU-MIMO may fail to utilize the available MIMO capacity to its full potential. The transmission time typically depends upon two factors: the link quality of the selected channel and the data length (packet size). To utilize the cumulative capacity of multiple channels in MIMO applications, the assignment of channels to each node should be controlled according to the measured channel quality or the transmission queue status of the node.A MAC protocol design that can switch between MU-MIMO and multiple SU-MIMO transmissions by considering the channel quality and queue status information prior to the actual data transmission (i.e., by exchanging control packets between transmitter and receiver pairs) could address such issues in a simple but in attractive way. In this study, we propose a new MAC protocol that is capable of performing such switching and thereby improve the system performance of very high throughput WLANs. The detailed performance analysis demonstrates that greater benefits can be obtained using the proposed scheme, as compared to conventional MU-MIMO transmission schemes.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.1
• /
• pp.308-324
• /
• 2018

HTTP adaptive streaming (HAS) is a promising technology for delivering video content over the Internet. HAS-based video streaming solutions rely on bandwidth estimation to select the appropriate video bitrate. Video streaming solutions that consider network conditions provide users with seamless video playback. However, when multiple clients compete for a common bottleneck link, conventional bandwidth estimation schemes that consider only one client overestimate the network bandwidth due to the ON-OFF traffic pattern. The bandwidth overestimation can cause Quality of Experience (QoE) degradation, such as unnecessary changes in video quality, and unfairness of video quality. In this paper, we propose a client-side bandwidth estimation scheme to obtain a better QoE of HAS in the multiple-client environment. The proposed scheme differentiates the client buffer status according to the buffer occupancy, and then estimates the available network bandwidth based on the buffer status and segment throughput. We evaluate the performance of HAS implemented in the ns-3 network simulator. Simulation results show that compared with the conventional schemes, the proposed scheme can enhance the QoE.

• Composites Research
• /
• v.24 no.5
• /
• pp.1-8
• /
• 2011

This paper presents the results of theoretical analysis and experimental test to show the size effect on the fiber strength of filament would pressure vessel. First, a series of fully scaled hoop ring tests with filament would carbon-epoxy were conducted, which exhibited a remarkable size effect on the fiber strength. Next, the failure analyses using WWLM(Weibull Weakest Link Model) and the SMFM(Sequential Multi-step Failure Model) were performed and compared to the hoop ring test data, as well as to unidirectional specimens test data from the literature. It was found that the analysis results significantly underestimated the fiber strengths compared to the test data. In this study, a modified SMFM was proposed through the modification of the length size effect. The fiber strengths from modified SMFM analysis showed good agreement with the test data.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.51 no.2
• /
• pp.55-60
• /
• 2002

This paper presents a controller for the multiple DC motors using the CAN(Controller Area Network). The controller has a benefit of reducing the cable connections and making the controller boards compact through the network including expansibility. CAN, among the field buses, is a serial communication methodology which has the physical layer and the data link layer in the ISO's OSI (Open System Interconnect) 7 layered reference model. It provides the user with many powerful features including multi-master functionality and the ability to broadcast / multicast telegrams. When we use a microprocessor chip embedding the CAN function, the system becomes more economical and reliable to react shortly in the data transmission. The controller, we proposed, is composed of two main controllers and a sub controller, which have built with a one-chip microprocessor having CAN function. The sub controller is plugged into the Pentium PC to perform a CAN communication, and connected to the main controllers via the CAN. Main controllers are responsible for controlling two motors respectively. Totally four motors, actuators for the biped robot in our laboratory, are controlled in the experiment. We show that the four motors are controlled properly to actuate the biped robot through the network in real time.

• Journal of Institute of Control, Robotics and Systems
• /
• v.4 no.1
• /
• pp.113-122
• /
• 1998

This paper presents an implementation method of Profibus interface software using FMS(Fieldbus Message Specification). The Profibus interface software is implemented on PC which is widely used as an industrial computer as well as a commercial embedded controller called IUC(Intelligent Universal Controller). In order to enable the Profibus interface software to handle many application tasks and communication services, two kinds of real-time/multi-tasking operating system, OS-9 and CTask, are utilized. We also develop an experimental model of Profibus-based automation system, and evaluate the performance of the Profibus network. Through experiments, the user layer level message latency is measured with respect to the change of message length, message generation interval and TRT(Target Rotation Time). The results of experiment are compared with those of a simulation model which comprises only the physical and data link layers of Profibus. The results of this study shows that the message latency in the user layer level occupies fairly a large part of the total message latency.