DOI QR코드

DOI QR Code

Size effect on tensile strength of filament wound CFRP composites

필라멘트 와인딩 탄소섬유 복합재의 인장강도 크기 효과

  • Received : 2011.06.28
  • Accepted : 2011.10.05
  • Published : 2011.10.31

Abstract

This paper presents the results of theoretical analysis and experimental test to show the size effect on the fiber strength of filament would pressure vessel. First, a series of fully scaled hoop ring tests with filament would carbon-epoxy were conducted, which exhibited a remarkable size effect on the fiber strength. Next, the failure analyses using WWLM(Weibull Weakest Link Model) and the SMFM(Sequential Multi-step Failure Model) were performed and compared to the hoop ring test data, as well as to unidirectional specimens test data from the literature. It was found that the analysis results significantly underestimated the fiber strengths compared to the test data. In this study, a modified SMFM was proposed through the modification of the length size effect. The fiber strengths from modified SMFM analysis showed good agreement with the test data.

본 논문은 필라멘트 와인딩 압력용기의 섬유 강도 크기 효과에 관한 이론 해석 및 시험 결과를 제시하였다. 첫 번째로, 카본-에폭시로 필라멘트 와인딩된 여러 크기의 후프 링 시험을 수행한 결과 섬유 강도의 크기 효과가 현저하게 나타났다. 다음으로, 해석적 방법으로 와이블 최약 파손 모델과 다 단계 연속 파손 모델을 이용한 파손 해석을 수행하여 후프 링 시험 결과 및 다른 문헌의 한 방향 복합재 시험 결과와 비교하였다. 해석 결과는 시험 결과와 비교하여 현저하게 낮은 섬유 강도 값들을 나타내었다. 본 논문에서는, 길이 방향의 크기 효과를 변경한 개선형 다단계 연속 파손 이론을 제시하였다. 개선형 다단계 연속 파손 이론으로부터 구한 섬유 강도 값들은 시험 결과들과 좋은 일치를 보였다.

Keywords

References

  1. Hwang, T.K., Hong, C.S., and Kim, C.G., "Probabilistic Deformation and Strength Prediction for a Filament Wound Pressure Vessel," Composite Part B, Vol. 34, 2003, pp. 481-497.
  2. Pierce, F.T., "Tensile Test for Cotton Yarns V. The Weakest Link Theorems on the Strength of Long and Short Composite Specimens," Journal of the Textile Institute Transactions , Vol. 17, 1926, pp. 355-368. https://doi.org/10.1080/19447027.1926.10599953
  3. Weibull, W., "A Statistical Theory of the Strength of Materials," Ingen. Handlingar, 1939, pp. 1-29.
  4. Bullock, R.E., "Strength Ratios of Composite Materials in Flexure and in Tension," Journal of Composite Materials, Vol. 8, 1974, pp. 200-206. https://doi.org/10.1177/002199837400800209
  5. Harlow, G., and Phoenix, S.L., "The Chain of Bundles Probability Model for the Strength of Fibrous Materials. I: Analysis and Conjectures," Journal of Composite Materials, Vol. 12, 1978, pp. 195-214. https://doi.org/10.1177/002199837801200207
  6. Gurvich, M.R., and Pipes, R.B., "Strength Size Effect of Laminated Composites," Composite Science and Technology, Vol. 55, 1995, pp. 93-105. https://doi.org/10.1016/0266-3538(95)00092-5
  7. Tabiei, A., and Sun, J. "Statistical Size Effect of Laminated Composite Materials," Composite Structures, Vol. 46, 1999, pp. 209-216. https://doi.org/10.1016/S0263-8223(99)00056-2
  8. Tabiei, A., and Sun, J., "Analytical Simulation of Strength Size Effect in Composite Materials," Composites, Part B: Engineering, Vol. 31, 2000, pp. 133-139. https://doi.org/10.1016/S1359-8368(99)00074-8
  9. Hwang, T.K., Hong, C.S., and Kim, C.G., "Size Effect on the Fiber Strength of Composite Pressure Vessels," Composite Structures, Vol. 59, 2003, pp. 489-498. https://doi.org/10.1016/S0263-8223(02)00250-7
  10. Cohen, D., "Application of Reliability and Fiber Probabilistic Strength Distribution Concepts to Composite Vessel Burst Strength Design," Journal of Composite Materials, Vol. 13, 1992, pp. 1984-2014.
  11. Cohen, D., Toombes, Y.T., Johnson, A.K., and Hanse, M.F., "Pressurized Ring Test for Composite Pressure Vessel Hoop Strength and Stiffness Evaluation," Journal of Composite Technology and Research, Vol. 17, No. 4, October, 1995, pp. 331-340. https://doi.org/10.1520/CTR10453J
  12. Hitchon, J.W., and Phillips, D.C., "The Effect of Specimen Size on the Strength of CFRP," Composites, Part B, Engineering, Vol, 9, 1978, pp. 119-24.
  13. Wisnom, M.R, "Size Effects in Unnotched Tensile Strength of Unidirectional and Quasi-isotropic Carbon/epoxy Composites," Composite Structures, Vol. 84, 2008, pp. 21-28. https://doi.org/10.1016/j.compstruct.2007.06.002
  14. 황태경, 박재범, 김형근, "필라멘트 와인딩 복합재 압력 용기의 섬유 방향 물성 평가 기법", 한국복합재료학회, 23권 3호, 2010, pp. 37-42.
  15. Tetsuya, T., and Takashi, M., "Size Effect on Tensile Strength of Carbon Fibers," Materials Science & Engineering A238, 1997, pp. 336-342.
  16. Curtin, W.A., "Tensile Strength of Fiber Reinforced Composites: III. Beyond the Traditional Weibull Model for Fiber Strengths," Journal of Composite Materials, Vol. 34, No. 15, 2000, pp. 1301-1332. https://doi.org/10.1177/002199830003401503

Cited by

  1. Evaluation of Strength Transition Rate for 6.8 L Composite Pressure Vessel Using Domestic High Strength Carbon Fiber vol.37, pp.11, 2011, https://doi.org/10.7736/jkspe.020.064