A bunker bed is a type of furniture that efficiently utilizes a narrow indoor space by having a high bed and using the empty space below as a living and storage space. The demand for multi-purpose furniture is increasing due to the recent increase in single-person households and wide-spread shared accommodation. According to the consumer research, one of the major drawbacks of a bunker bed was to get on and off the bed through a ladder or stairs. In order to overcome these problems, it was confirmed that the height adjustment function that can easily adjust the minimum and maximum heights of the bed was necessary. In this study, a height adjustable bunker bed was designed by using a gas spring that generates a repulsive force by the compressed gas inside. The design process consisted of the following three steps: Firstly, the hysteresis characteristics due to a friction and spring constant of a commercial gas spring were confirmed by measuring the repulsive force vs. compressed displacement. Secondly, requirements of the vertical lifting force exerted on the bed against gravity force were derived. Finally, the height-adjustable bed using the four-bar link mechanism was designed with 4 parameters so that the bed weight of 60-70 kgf could be adjusted to 800 mm in height by an affordable initial operation force. The performance was verified through prototype production and the results of vertical displacement and force to move were nearly the same as designed. In addition, an electrically operated height-adjustable bed was also designed with linear actuators and the performance was proved with the prototype.
A wireless access point is used for all communications in the infrastructure mode wireless home networking, including communication between mobile nodes in the same service area. When a mobile station in the infrastructure mode wireless home networking moves into a dead zone, the communication between the mobile station and the access point is disconnected. To solve this problem, the existing wireless home network platforms focus on the ad hoc mode wireless home networking. However, the performance of an ad hoc network is poorly decreased when the number of mobile participating in the ad hoc network increases. In addition, although the ad hoc routing technique is necessary to support seamless communication of mobile nodes, the existing routing protocols, such as AODV and DSR, do not consider that a wireless channel state could affect performance significantly. Therefore, we propose a wireless home networking platform based on the ESCOD (End-to-end Seamless multi-hop COnnection based on Dual network mode) technique incorporating the VLR (Virtual Link Routing) scheme that supports end-to-end seamless connections. Extensive experiments show that the proposed wireless home networking platform incorporating the VLR scheme outperforms wireless home networking platforms based on the AODV and the DSR routing protocols respectively in terms of low packet transmission failure rate, fast packet transmission time, high TCP performance, and a wider coverage area of wireless home networks.
The Journal of the Institute of Internet, Broadcasting and Communication
/
v.12
no.6
/
pp.257-264
/
2012
In this paper, we propose a Route Stability-based Direction Guided Routing protocol(RSDGR) in mobile ad-hoc wireless networks. The main features and contributions of the proposed routing protocol are as follows. First, it can calculate link stability between two nodes as well as route stability of multi hop quantitatively by using nodes' mobility. And this protocol can establish the most stable path between a source node and a destination node. Second, according to the route stability between a source node and a destination node, it can control and optimize the direction guided region dynamically for route setup. Third, we suggest theoretical model for quantitative calculation of link stability between two nodes and route stability of multi hop path. The performance evaluation of the proposed routing protocol is performed by simulation using OPNET(Optimized Network Engineering Tool) and theoretical analysis. The results of performance evaluation show that the patterns of PDR are similar in simulation and analysis according to route stability. The faster mobile nodes' velocity and the smaller source node's direct guided reigion, the lower route stability and PDR and the higher delay and control overhead related to this.
Journal of the Institute of Electronics and Information Engineers
/
v.52
no.9
/
pp.54-62
/
2015
Although NAND flash-based SSD (Solid-State Drive) provides superior performance in comparison to HDD (Hard Disk Drive), it has a major drawback in write endurance. As a result, the lifetime of SSD is determined by the workload and thus it becomes a big challenge in current technology trend of such as the shifting from SLC (Single Level Cell) to MLC (Multi Level cell) and even TLC (Triple Level Cell). Most previous studies have dealt with wear-leveling or improving SSD lifetime regarding hardware architecture. In this paper, we propose the optimal configuration of host I/O stack focusing on file system, I/O scheduler, and link power management using JEDEC enterprise workloads in terms of WAF (Write Amplification Factor) which represents the efficiency perspective of SSD life time especially for host write processing into flash memory. Experimental analysis shows that the optimum configuration of I/O stack for the perspective of SSD lifetime is MinPower-Dead-XFS which prolongs the lifetime of SSD approximately 2.6 times in comparison with MaxPower-Cfq-Ext4, the best performance combination. Though the performance was reduced by 13%, this contributions demonstrates a considerable aspect of SSD lifetime in relation to I/O stack optimization.
We introduce our experiences of the design and implementation of the Page Together system that has expanded hyperlink metaphor to utilize human resources in the web. This system supports that a user connects with others in the web, communicates through video/audio channel, navigates same web pages simultaneously and cooperates some work on Internet. For these functions, it comprises Collaborative Browsing Module (CBM), Multimedia Conferencing Module(MCM) Data Conferencing Module(I)CM) and Multi Protocol Interface(MPI). We adopted three standard protocols, IEC, H.323 and T.120 for each nodule and it allows developers to use them easily. We also defined MPI to synchronize information of session among modules. Each module exchanges information each other in session creating process and session terminating process. After a session is created once, each module works independently as its won protocol. Interferences among modules are reduced as minimizing to exchange information. We also introduce a web site that provides web board service based on the Page Together system. A user may post a notice with a link to himself/herself on our web board. After then, if someone read that notice and has any question about it, he or she can try to connect to the writer as clicking the link in that notice and communicate each other. This service site shows that our system can be applied to diverse internet services such as distance teaming and distance conference.
Asia-Pacific Journal of Business Venturing and Entrepreneurship
/
v.14
no.6
/
pp.143-153
/
2019
This study This study analyzed the effectiveness of Corporate Entrepreneurship, using Human Capital Corporate Panel (HCCP) data from 2017. The attitude of workers, which is main link in the process of corporate entrepreneurship, has been studied at a singular level at individual and organizational levels due to the lack of data and analysis methods. Multi-level analysis using hierarchical and linear modeling was performed to improve the accuracy of the relationship estimation between variables. In addition, this study examined the moderating effect of the organizational level in the process of entrepreneurship. As a result, corporate entrepreneurship has had a positive effect on job satisfaction and turnover, which is due to the employees attitude and organization. Organizational trust in the process has been shown to perform an important role in the relationship between the corporate entrepreneurship and job satisfaction, and that the relationship between the corporate entrepreneurship and turnover has not been controlled. Based on these results, the implications, limitations, and future research tasks of the study are discussed.
Kim, Byeong-Gwan;Lee, Yeong-In;Im, Yong-Taek;Im, Gang-Won
Journal of Korean Society of Transportation
/
v.29
no.1
/
pp.81-93
/
2011
This research deals with the multi-modal continuous network design problem to resolve the transportation policy problems for constructing and operating transportation facilities with considering the mutual decision-making process between transportation operator and user in the multi-modal network. Particularly, in the consideration of changes in travel pattern between transport modes due to the changes in transportation policy, road network for passenger car and transit network for public transportation are considered together. In the development of network design model, more rational Stackelberg equilibrium(cooperative game) rather than more general Nash equilibrium(non-cooperative game) approach is used and sensitivity analysis considering transport mode is used. A multi-modal continuous network design model in this study is developed for the arbitrary continuous network design parameters(${\epsilon},\hat{\epsilon},p$) of transportation policy decisions. As examples of application and evaluation for these design parameters, the developed model is applied to calculate 1)the optimal capacity of road link in the road transport policy, 2)the optimal frequency of transit line in public transport policy and 3)the optimal modal split in transport modal share policy.
This paper proposes an interference avoidance approach for Constraint-Based Routing (CBR) algorithm in the Multi-Protocol Label Switching (MPLS) network. The MPLS network itself has a capability of integrating among any layer-3 protocols and any layer-2 protocols of the OSI model. It is based on the label switching technology, which is fast and flexible switching technique using pre-defined Label Switching Paths (LSPs). The MPLS network is a solution for the Traffic Engineering(TE), Quality of Service (QoS), Virtual Private Network (VPN), and Constraint-Based Routing (CBR) issues. According to the MPLS CBR, routing performance requirements are capability for on-line routing, high network throughput, high network utilization, high network scalability, fast rerouting performance, low percentage of call-setup request blocking, and low calculation complexity. There are many previously proposed algorithms such as minimum hop (MH) algorithm, widest shortest path (WSP) algorithm, and minimum interference routing algorithm (MIRA). The MIRA algorithm is currently seemed to be the best solution for the MPLS routing problem in case of selecting a path with minimum interference level. It achieves lower call-setup request blocking, lower interference level, higher network utilization and higher network throughput. However, it suffers from routing calculation complexity which makes it difficult to real task implementation. In this paper, there are three objectives for routing algorithm design, which are minimizing interference levels with other source-destination node pairs, minimizing resource usage by selecting a minimum hop path first, and reducing calculation complexity. The proposed CBR algorithm is based on power factor calculation of total amount of possible path per link and the residual bandwidth in the network. A path with high power factor should be considered as minimum interference path and should be selected for path setup. With the proposed algorithm, all of the three objectives are attained and the approach of selection of a high power factor path could minimize interference level among all source-destination node pairs. The approach of selection of a shortest path from many equal power factor paths approach could minimize the usage of network resource. Then the network has higher resource reservation for future call-setup request. Moreover, the calculation of possible path per link (or interference level indicator) is run only whenever the network topology has been changed. Hence, this approach could reduce routing calculation complexity. The simulation results show that the proposed algorithm has good performance over high network utilization, low call-setup blocking percentage and low routing computation complexity.
The Journal of Korean Institute of Communications and Information Sciences
/
v.27
no.4B
/
pp.298-307
/
2002
This paper concentrates on developing and analyzing an advanced space-time multiuser receiver for WCDMA forward link. Through exploring the interference caused by co-channel users and delayed multipaths in CDMA, a constrained linear adaptive filter is adopted to cancel the interference. Furthermore, by utilizing the space-time diversity, an optimum diversity receiver, called a constrained adaptive space-time interference canceller (C-ASTIC), is proposed. For comparison, the statistical analysis of multiuser performance for WCDMA system with space-time diversity is described. The result of the simulation showed that C-ASTIC performs better than both the space-time diversity combining maximal ratio combiner (MRC) and the single-antenna adaptive interference canceller in a multipath fading channel. Also, the efficiency of the C-ASTIC in the multimedia communication environment is investigated under the multiuser, multi-transmit antenna, and multirate WCDMA system in a multipath fading channel. From the results, the C-ASTIC was validated to be useful for multi-rate WCDMA system through improving the performance gain by more than 3 dB at BER of 10$\^$-3/ in a half or more loaded system.
The Journal of Korean Institute of Communications and Information Sciences
/
v.32
no.7A
/
pp.762-769
/
2007
Adaptive MIMO-OFDM (Orthogonal Frequency Division Multiplexing) system adaptively changes modulation scheme depending on feedback channel state information (CSI). The CSI feedback channel which is the reverse link channel has multiple symbol delays including propagation delay, processing delay, frame delay, etc. The unreliable CSI due to feedback delay degrades adaptive modulation system performance. This paper compares the MSE and data capacity with respect to delay and channel signal to noise ratio for the two multi-step channel prediction schemes, CTSBP and BTSBP, such that robust adaptive SISO-OFDM/MIMO-OFDM is designed over severe mobile multipath channel conditions. This paper presents an interpolation method to reduce feedback overhead for adaptive MIMO-OFDM and shows MSE with respect to interpolation interval.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.