• The Journal of the Acoustical Society of Korea
• /
• v.25 no.3E
• /
• pp.123-130
• /
• 2006

The adaptive echo canceller (AEC) has become an important component in speech communication systems, including mobile station. In these applications, the acoustic echo path has a long impulse response. We propose a running-average least mean square (RALMS) algorithm with a detection method for acoustic echo cancellation. Using colored input models, the result clearly shows that the RALMS detection algorithm has a convergence performance superior to the least mean square (LMS) detection algorithm alone. The computational complexity of the new RALMS algorithm is only slightly greater than that of the standard LMS detection algorithm but confers a major improvement in stability.

• Journal of Korean Society for Quality Management
• /
• v.22 no.4
• /
• pp.13-27
• /
• 1994

This study is concerned with design of EWMA control charts for counted data. Control charts for the fraction defective and the number of defects are designed. Performance analysis is accomplished for validity of the designed EWMA control charts. Average run length(ARL) is adopted as a criterion for comparison. Simulation results show that the designed EWMA control charts have shorter ARL than pn, p and c control charts when the fraction nonconforming or the average defect number are shifted. This means that the designed control charts can detect the out of -control state of the process more fastly than the traditional control charts.

• Journal of Korean Institute of Industrial Engineers
• /
• v.7 no.1
• /
• pp.21-31
• /
• 1981

This paper develops a short term forecasting model for household electric power consumption in Seoul, which can be used for the effective planning and control of utility management. The model developed is based on exponentially weighted moving average model and incorporates monthly average temperature as an exogeneous factor so as to enhance its forecasting accuracy. The model is empirically compared with the Winters' three parameter model which is widely used in practice and the Box-Jenkins model known to be one of the most accurate short term forecasting techniques. The result indicates that the developed hybrid exponential model is better in terms of accuracy measured by average forecast error, mean squared error, and autocorrelated error.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.329-330
• /
• 2015

From the results of previous my paper [10] in 2015 year of economic and electrical power storage research conference in Naju, this paper describes an application of autoregressive and moving average (ARMA) model to forecast hourly average wind speed (HAWS) in Jeju island. The models are used to build up short-term forecast of hourly average wind speed by the weighted sum of previous wind speed values.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.1
• /
• pp.193-204
• /
• 1997

In this research we propose the design of the Order Statistic-Adaptive Weighted Average Hybrid(OS-AWAH) filter which can suppress noise from the corrupted image sequence effectively while preserving the image structure. The proposed filter combines the desirable properties of the order static based spatial filter which can preserve the image structure while reducing noise and the adaptive weighted average based temporal filter which can adapt the filtering weights according to the amount of motion without motion estimation. Performance characteristics of the OS-AWAH filter in noisy sequences containing moving step edges are investigated throuth computer simulations and compared with the median based filters such as 3-D WM(weighted median) filter, MMF (multistage median filter), ADCWM(adaptive directional center weighted median) filter. The visual evaluations are also carried out by applyin gthe filters to the real images. The statistical analysis and experimental reslts show that the OS-AWAH filter is effective in preserving image structures while suppressing noise effectively without motion compensation preprocessing.

• Proceedings of the KSME Conference
• /
• 2001.06b
• /
• pp.700-705
• /
• 2001

The paper presents a seam tracking controller of high speed rotating arc sensor developed by microprocessor based system. The seam tracking algorithm is based on the average current value at each interval region of four phase points on one rotating cycle. To remove the noise effect for the measured current, the area during one rotating cycle is separated into four regions of front, rear, left and right. The average values at each region are calculated, using the regional current values and a low pass filter incorporating the moving average and exponential smoothing methods is adopted.

• Journal of Power System Engineering
• /
• v.6 no.4
• /
• pp.43-48
• /
• 2002

This paper presents a seam tracking controller of high speed rotating arc sensor developed by microprocessor based system. The seam tracking algorithm is based on the average current value at each interval region of four phase points on one rotating cycle. To remove the noise effect for the measured current, the area during one rotating cycle is separated into four regions of front, rear, left and right. The average values at each region are calculated, using the regional current values and a low pass filter incorporating the moving average and exponential smoothing methods is adopted. The effectiveness is proven through the experimental results for several kinds of welding condition.

• The korean journal of orthodontics
• /
• v.24 no.3 s.46
• /
• pp.721-733
• /
• 1994

Orthodontic tooth movement is closely related to the stress on the periodontal tissue. In this research the finite element method was used to observe the stress distribution and to find the best condition for effective tooth movement in the case of unilateral molar expansion. The author constructed the model of lower dental arch of average Korean adult and used $.032'\times.032'\times60mm$ TMA wire. The wire was deflected in the horizontal and vertical direction to give the 16 conditions. The following results were obtained ; 1. When the moment and force were controlled properly the movement of anchor tooth was minimized and the movement of moving tooth was maximized. 2. As the initial horizontal deflection increased the buccal displacement of both teeth was also increased. As the initial horizontal deflection increased the lingual movement of anchor tooth and the buccal movement of moving tooth increased. 3. When the initial horizontal and vertical deflection rate was 1.5 the effective movement of moving tooth was observed with minimal displacement of anchor tooth.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.22 no.1
• /
• pp.75-85
• /
• 1985

We have studied on the 2-D moving target tracking algorithm satisfying a real-time hardware implementation requirement. In this paper, a fast algorithm is developed based on the operator formulation and the variational algorithm f 10] . Here, we use the directed search for the maximum of the cross-correlation in order to obtain an initial estimate for the variational algorithm and decompose the scene into 16 smaller subblocks and apply the variational algorithm to each subblock sequentially with a new moving area detection method. We call the algorithm subblock based recursive algorithm. Compared with (10) , the ratio of the computational savings obtained from the proposed algorithm is 7 on the average.

• Journal of the military operations research society of Korea
• /
• v.1 no.1
• /
• pp.111-129
• /
• 1975

U.S. Air Force Regulation 80-1 defines that a weapon system is composed of equipments, skills, and techniques, the composite of which ferns an instrument of combat. The complete weapon system includes all related facilities, equipments, materials, services, and personnels required for the operation of the system, so that the instrument of combat can be considered as a self-sufficient unit of striking power in its intended operational environment. Effectiveness of a weapon system can be expressed as a function of its liability, reliability and performance capability. Among these attributes which influence the weapon effectiveness, performance capability is considered to be the most critical factor for many weapon systems. In order to illustrate the application of the methodology of performance capability, a specific ease study on the effectiveness of Vulcan anti-air craft gun system is presented with special emphasis on hitting probability on moving targets, effects of artificial rounds dispersion, and several principles related to the deployment of the system. This thesis includes the thorough survey of the possibility of calculating the absolute value of hitting probability on moving targets, indicates that the effects of artificial rounds dispersion increase the value of probability only when the total number of rounds fired within fire range exceeds a certain critical number, and suggests that concentrated guns deployment is better than scattered deployment in order to obtain higher probability and lower average amount of rounds if it is assumed that the effects of counter-attack from enemy threats are not serious.