• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.11
• /
• pp.79-88
• /
• 1999

In this paper we address the tracking method which tracks only target object in image sequence including moving object. We use a contour tracking algorithm based on intensity and motion boundaries. The motion of the moving object contour in the image is assumed to be well describable by an affine motion model with a translation, a change in scale and a rotation. The moving object contour is represented by B-spline, the position and motion of which is estimated along the image sequence. we use pattern recognition to identify target object. In order to use linear Kalman Filters we decompose the estimation process into two filters. One is estimating the affine motion parameters and the other the shape of moving object contour. In some experiments with dial plate we show that this method enables us to obtain the robust motion estimates and tracking trajectories even in case of including obstructive object.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.7
• /
• pp.641-647
• /
• 2015

This paper proposes a new strategy for a quad-rotor to track a moving object efficiently by using image processing and an extended Kalman filter. The goal of path planning for the quad-rotor is to design an optimal path from the start point to the destination point. To lengthen the freight time of the quad-rotor, an optimal path is required to reduce the energy consumption. To track a moving object, the mark signed on the moving object has been detected by a camera mounted first on the quad-rotor. The center coordinates of the mark and its area are calculated through the blob analysis which is one type of image processing. The mark coordinates are utilized to obtain information on the motion direction and the area of the mark is utilized to recognize whether the object moves backward or forward from the camera on the quad-rotor. In addition, an extended Kalman filter has been applied to predict the direction and speed of the dynamically moving object. Through these schemes, it is aimed that the quad-rotor can track the dynamic object efficiently in terms of flight distance and time. Through the two different route freights of the quad-rotor, the performance of the proposed system has been demonstrated.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.11C
• /
• pp.1527-1540
• /
• 2004

In this paper, velocity measurement of fast moving object for traffic information acquisition using line sampling of image is proposed. Velocity measurement for traffic information acquisition of moving object is that the first sample line and second sample line on the road is set, then car is detected by using difference image method between time-variance hue data of image when car is passing two sample lines and hue data of the reference image, and velocity of the car is measured by using frame number of video which is occupied by two sample lines. Identification of the car is performed by hue of the detected car between the first sample line and second sample line, respectively To examine the propriety of the proposed algorithm, identification and velocity measurement for driving car is evaluated. The evaluated results is that it is identified by hue data of car passing two sample lines, and the velocity measurement for driving car is less than 3% comparing with X-band speed gun.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.2
• /
• pp.91-98
• /
• 2010

In order to control moving facilities on a remote place effectively, it are required to acquire a environment informations such as images where the moving facilities are placed. However, since there is no tools to acquire such informations to the central control system based on the non-networked sensor environments, it is difficult to control the moving facilities remotely. Therefore, we design and implement the Zigbee based image transmission system and communication protocol to control the moving target remotely. The wireless control utilizing the Zigbee protocol is that electrically consumption is more small than the Bluetooth and reliability of data transmission is better. The implemented Zigbee based control systems and communication protocol have the normal and replay function for a realtime control of the moving target under the server PC and the mobile FDA with the WiFi protocol. The functional operability and performance are analyzed by a designed prototype under the wireless home network environment.

• Journal of the Korean Society of Radiology
• /
• v.3 no.1
• /
• pp.5-9
• /
• 2009

The trend of Digital x-ray Detector research is to improve resolution of image and to embody large area imaging as well as dynamic moving imaging, etc. This research is divided with indirect conversion method and direct conversion method by radiation conversion process. Each conversion method has problems such as decrease of resolution from light scattering in indirect method case and not only low system stability but also difficult in dynamic moving imaging in direct method case. X-ray detector using liquid crystal has been researching to solve these problems, but it is difficulty in uniform injection of liquid crystal because of its structural properties. Therefore, this study suggests the structure which solves present problem. Also the possibility of suggested structure was investigated using simulation.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.712-715
• /
• 1997

In image jacobian based visual servoing, generally, inverse jacobian should be calculated by complicated coordinate transformations. These are required excessive computation and the singularity of the image jacobian should be considered. This paper presents a visual servoing to control the pose of the robotic manipulator for tracking and grasping 3-D moving object whose pose and motion parameters are unknown. Because the object is in motion tracking and grasping must be done on-line and the controller must have continuous learning ability. In order to estimate parameters of a moving object we use the kalman filter. And for tracking and grasping a moving object we use a fuzzy inference based reinforcement learning algorithm of dynamic recurrent neural networks. Computer simulation results are presented to demonstrate the performance of this visual servoing

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.673-676
• /
• 2003

This paper deals with the problem of moving object detection and location in computer vision. We describe a new object-dependent motion analysis method for tracking target in an image sequence taken from a moving platform. We tackle these tasks with three steps. First, we make an active contour model of a target in order to build some of low-energy points, which are called kernels. Then we detect interest points in two windows called tracking windows around a kernel respectively. At the third step, we decide the correspondence of those detected interest points between tracking windows by the probabilistic relaxation method In this algorithm, the detecting process is iterative and begins with the detection of all potential correspondence pair in consecutive image. Each pair of corresponding points is then iteratively recomputed to get a globally optimum set of pairwise correspondences.

• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2005.11a
• /
• pp.113-117
• /
• 2005

This paper describes a visual control scheme, fuzzy logic system for visual servoing of an autonomous mobile robot. An existing communication autonomous mobile robot always needs to keep the object in image to detect the moving object. This is a problem in an autonomous mobile robot for spontaneous activity. To solve it, some features for an object are taken from an image and then use in the design of fuzzy logic system for decision of moving location and direction of visual servoing contrivance(apparatus). So continuous tracking is possible by moving the visual servoing contrivance. We present some simulation results and further studies in the Section of Simulation and Concluding Remarks.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.257-259
• /
• 1996

This paper presents the active eye system for tracking a moving object in 3D space. A prototype system able to track a moving object is designed and implemented. The mechanical system ables the control of platform that consists of binocular camera and also the control of the vergence angle of each camera by step motor. Each camera has two degrees of freedom. The image features of the object are extracted from complicated environment by using zero disparity filtering(ZDF). From the cnetroid of the image features the gaze point on object is calculated and the vergence angle of each camera is controlled by step motor. The Proposed method is implemented on the prototype with robust and fast calculation time.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.302-305
• /
• 1996

This paper presents a visual servoing combined by Neural Network with optimal structure and predictive control for robotic manipulators to tracking or grasping of the moving object. Using the four feature image information from CCD camera attached to end-effector of RV-M2 robot manipulator having 5 dof, we want to predict the updated position of the object. The Kalman filter is used to estimate the motion parameters, namely the state vector of the moving object in successive image frames, and using the multi layer feedforward neural network that permits the connection of other layers, evolutionary programming(EP) that search the structure and weight of the neural network, and evolution strategies(ES) which training the weight of neuron, we optimized the net structure of control scheme. The validity and effectiveness of the proposed control scheme and predictive control of moving object will be verified by computer simulation.