• Interaction and multiscale mechanics
• /
• v.3 no.4
• /
• pp.321-331
• /
• 2010

A new technique is proposed for bridge structural damage detection based on spatial wavelet analysis of the time history obtained from vehicle body moving over the bridge, which is different from traditional detection techniques based on the bridge response. A simply-supported Bernoulli-Euler beam subjected to a moving spring-mass unit is established, with the crack in the beam simulated by modeling the cracked section as a rotational spring connecting two undamaged beam segments, and the equations of motion for the system is derived. By using the transfer matrix method, the natural frequencies and mode shapes of the cracked beam are determined. The responses of the beam and the moving spring-mass unit are obtained by modal decomposition theory. The continuous wavelet transform is calculated on the displacement time histories of the sprung-mass. The case study result shows that the damage location can be accurately determined and the method is effective.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.9
• /
• pp.35-42
• /
• 2019

In this paper, we propose an approach to apply network-based moving target defense into Internet of Things (IoT) networks. The IoT is a technology that provides the high interconnectivity of things like electronic devices. However, cyber security risks are expected to increase as the interconnectivity of such devices increases. One recent study demonstrated a man-in-the-middle attack in the statically configured IoT network. In recent years, a new approach to cyber security, called the moving target defense, has emerged as a potential solution to the challenge of static systems. The approach continuously changes system's attack surface to prevent attacks. After analyzing IPv4 / IPv6-based moving target defense schemes and IoT network-related technologies, we present our approach in terms of addressing systems, address mutation techniques, communication models, network configuration, and node mobility. In addition, we summarize the direction of future research in relation to the proposed approach.

• Structural Engineering and Mechanics
• /
• v.62 no.5
• /
• pp.631-642
• /
• 2017

Accurate actuator tracking plays an important role in real-time hybrid simulation (RTHS) to ensure accurate and reliable experimental results. Frequency-domain evaluation index (FEI) interprets actuator tracking into amplitude and phase errors thus providing a promising tool for quantitative assessment of real-time hybrid simulation results. Previous applications of FEI successfully evaluated actuator tracking over the entire duration of the tests. In this study, FEI with moving window technique is explored to provide post-experiment localized actuator tracking assessment. Both moving window with and without overlap are investigated through computational simulations. The challenge is discussed for Fourier Transform to satisfy both time domain and frequency resolution for selected length of moving window. The required data window length for accuracy is shown to depend on the natural frequency and structural nonlinearity as well as the ground motion input for both moving windows with and without overlap. Moving window without overlap shows better computational efficiency and has potential for future online evaluation. Moving window with overlap however requires much more computational efforts and is more suitable for post-experiment evaluation. Existing RTHS data from Network Earthquake Engineering Simulation (NEES) is utilized to further demonstrate the effectiveness of the proposed approaches. It is demonstrated that with proper window size, FEI with moving window techniques enable accurate localized evaluation of actuator tracking for real-time hybrid simulation.

• The Journal of the Korea Contents Association
• /
• v.10 no.6
• /
• pp.35-42
• /
• 2010

Side information generation techniques play a great role in determining the overall performance of the DVC (Distributed Video Coding) coding system. Most conventional techniques for side information generation are mainly based on the block matching algorithm with symmetric motion estimation between the previously reconstructed key frames. But, these techniques tend to show mismatches between the motion vectors and the real placements of moving objects. So these techniques need to be modified so as to search well the real placements of moving objects. To overcome this problem, this paper proposes a block-centered symmetric motion estimation technique which uses the same coordinates with the given block. Through computer simulations, it is shown that the proposed algorithm outperforms the conventional schemes in the objective quality.

• Korean Journal of Acupuncture
• /
• v.33 no.4
• /
• pp.149-156
• /
• 2016

Objectives and Methods : The aim of this study was to investigate twirling and supplementation and draining by analyzing ancient acupuncture literature and modern research papers, and to discuss the quantitative standards for the procedure. Results : Twirling supplementation and draining techniques were first described in Huang do neijing, after which they were recorded in various other ancient acupuncture texts. Not only were these techniques used in the active treatment of patient historically, but they also form the foundations of modern-day acupuncture treatment. Twirling supplementation and draining techniques described in ancient literatures can be divided into Yin and Yang. Examples of Yang characteristics include Up, Male, Morning, Hands, the governor vessel, Outside, and Left. The left rotation technique is a reinforcing method performed by moving the thumb forward while rotating the needle. Examples of Yin characteristics include Down, Female, Afternoon, Foot, the conception vessel(CV), Inside, and Right. The right rotation technique is a reducing method performed by moving the thumb backward while rotating the needle. Twirling supplementation and draining has been divided for four ways by classical literature and research that worked before. the direction of acupuncture, the stimulus-quantity of acupuncture, the performance of doctor(the uses of both hands, left and right hand) and the feeling of patient. Conclusions : Therefore, continuous research is required to implement Twirling supplementation and draining in a consistent manner. In addition, more active clinical trials using the techniques are necessary as well.

• Journal of Digital Convergence
• /
• v.14 no.5
• /
• pp.301-307
• /
• 2016

The location measurement technique of moving worker in dangerous areas, is necessary for safety in the mines, basements, warehouses, etc. There are various measurement techniques about moving node of position in a restricted environment. Trigonometric Method, one of measurement techniques, is commonly used because of its easiness. However, errors occur frequently when measuring distance and position due to radio interference and physical disability with measuring instruments. This paper proposed a method which is more accurate and shows reduced margin of error than existing trigonometric method by recalculating distance between Anchor and moving node with various measuring instruments. By adding Anchor when calculating distance and position of moving node's estimated point, suggested technique obtains at least 41% efficiency compared to existing method.

• The Journal of the Korea Contents Association
• /
• v.7 no.6
• /
• pp.9-21
• /
• 2007

In this paper, the hybrid methods are suggested, which use the direction angle information to present running trajectory and track the past locations through a small amount of vehicle's location information. In order to prove the effectiveness of the new technique suggested here, vehicle's location information are collected by running the vehicles moving objects under various conditions. Using the location informations and direction angle information collected with time intervals, the vehicl e's location information is abstracted, compared and analyzed. and I have proved that the suggested techniques are more effective by comparing them with others in various methods such as GPS TrackMaker, difference image techniques, consistency comparison, quantity comparison, vehicle's running distances and so on.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.10
• /
• pp.83-92
• /
• 2017

Reconnaissance is performed gathering information from a series of scanning probes where the objective is to identify attributes of target hosts. Network reconnaissance of IP addresses and ports is prerequisite to various cyber attacks. In order to increase the attacker's workload and to break the attack kill chain, a few proactive techniques based on the network-based moving target defense (NMTD) paradigm, referred to as IP address mutation/randomization, have been presented. However, there are no commercial or trial systems deployed in real networks. In this paper, we propose a threat model and the request for requirements for developing NMTD techniques. For this purpose, we first examine the challenging problems in the NMTD mechanisms that were proposed for the legacy TCP/IP network. Secondly, we present a threat model in terms of attacker's intelligence, the intended information scope, and the attacker's location. Lastly, we provide seven basic requirements to develop an NMTD mechanism for the legacy TCP/IP network: 1) end-host address mutation, 2) post tracking, 3) address mutation unit, 4) service transparency, 5) name and address access, 6) adaptive defense, and 7) controller operation. We believe that this paper gives some insight into how to design and implement a new NMTD mechanism that would be deployable in real network.

• KIPS Transactions on Software and Data Engineering
• /
• v.4 no.12
• /
• pp.585-588
• /
• 2015

The technical challenge of 3D image display using the wireless sensor were applied to variable areas and scopes. This techniques need to very accurate location and speed informations and recognitions to moving objects. The tracking challenges of the moving objects location that combined 3D location and speed sensor were applied to sports and healthcare areas. This areas seek to the accuracy and collections and tightly related to image display and analysis techniques. In this paper, We developed the 3D motion display that can be monitor moving objects on the 3D virtual space. For this works, we constructed the database that collected informations through 9-axis sensor and demonstrated the result of 3D motion display on the Window based environments.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.8
• /
• pp.673-679
• /
• 2004

In this paper, we develop the displacement measurement system of multiple moving objects based on image processing techniques. The image processing method adopts inertia moment theory for obtaining the centroid measurement of the targets and basic processing algorithm of gray, binary, closing, labeling and so on. To get precise displacement measurement in spite of multiple moving targets, a CGD camera with zoom is used and the position of camera is changed by a pan/tilt system. The fiducial marks on the fixed positions are used as the sensing points for the image processing to recognize the position errors in direction of XY-coordinates. The precise alignment device is pan/tilt of XY-type and the pan/tilt is controlled by DC servomotors which are driven by a microprocessor. Morover, the centers of fiducial marks are obtainted by an inertia moment method. By applying the developed precise position control system for multiple targets, the displacement of multiple moving targets are detected automatically and are also stored in the database system in a real time. By using database system and internet, the displacement datum can be confirmed at a great distance and analyzed. Finally, the effectiveness of developed system is shown in experimental results and realized the precision about 0.12[mm] in the position control of XY-coordinates.