• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.529-532
• /
• 2012

This paper presents the system modeling, analysis, and controller design and implementation with a inverted pendulum system in order to test robust algorithm for sweeping machine. The balancing of an inverted pendulum by moving pendulum robot like as 'segway' along a horizontal track is a classic problem in the area of control. This paper will describe two methods to swing a pendulum attached to a cart from an initial downwards position to an upright position and maintain that state. The results of real experiment show that the proposed control system has superior performance for following a reference command at certain initial conditions.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.26 no.1
• /
• pp.50-58
• /
• 2017

This paper proposes a real-time robotic vision control scheme using the weighting matrix to efficiently process the vision data obtained during robotic movement to a target. This scheme is based on the vision system model that can actively control the camera parameter and robotic position change over previous studies. The vision control algorithm involves parameter estimation, joint angle estimation, and weighting matrix models. To demonstrate the effectiveness of the proposed control scheme, this study is divided into two parts: not applying the weighting matrix and applying the weighting matrix to the vision data obtained while the camera is moving towards the target. Finally, the position accuracy of the two cases is compared by performing the slender bar placement task experimentally.

• Journal of Biosystems Engineering
• /
• v.34 no.5
• /
• pp.305-314
• /
• 2009

The purpose of this paper was to design an effective control system of 1-axis exciter for a seat vibration test of agricultural tractors using MATLAB simulation. The developed simulation model was composed with a hydraulic pump, a hydraulic servo valve, a hydraulic cylinder and load system. Also it was verified by comparing the simulation results with experimental results of actual control system in order to optimize the control performance. And in order to improve its control performance, the designed PID controller in this research was tuned using Ziegler-Nichols 2nd law and zero's moving method of PID controller's transfer function. As the result of these research, the developed position control system was able to control the system's position accurately within 5% errors.

• Journal of Welding and Joining
• /
• v.14 no.6
• /
• pp.131-139
• /
• 1996

The response of the arc sensor using the welding current and/or welding voltage as its outputs has been obtained by the analysis and/or experiments of the static characteristics of arc sensor. But in order to improve the reliability of arc sensor, it is necessary to know its dynamic characteristics. So in this paper, it is presented the dynamic model of arc sensor including the power source, arc voltage, electrode burnoff rate, and wire feed rate. A numerical simulation of the dynamic model of arc sensor was implemented, computing the welding current with input of CTWD. The results of computer simulations and experiments of $CO_2$arc welding showed that a linear relationship between weaving center - weld line distance and current area difference was established. Additionally, a real-time weld seam tracking system interfaced with industrial welding robot was constructed, the result of the weld seam tracking experiment for weld line with an initial offset error of 5$^{\circ}$was good.

• Proceedings of the KIEE Conference
• /
• 2008.10b
• /
• pp.353-354
• /
• 2008

본 논문에서는 GPS, Bleutooth 모듈을 사용하여 이동로봇의 군집이동에 관한 연구를 다루었다. 로봇 통신 모델로는 특정한 수신자가 정보를 받을 것을 기대하지 않고 통신가능 범위 안으로 들어왔을 때 상대방에게 정보를 보내는 방법인 사인보드 모델을 선택하였다. 군집간 제어를 위한 총 3대의 실외 이동을 로봇제작과 로봇의 좌표인식, 방향을 찾기 위해 GPS수신 모들과 Bluetooth 송 수신기를 사용하였다. 실험에 쓰인 모든 이동용 로봇에 GPS수신기와 Bluetooth 송 수신기를 장착하였고, GPS수신기로부터 받은 Master-이동로봇의 위치좌표를 Bluetroth 통신 영역 내에 있는 모든 이동로봇에게 송신을 한다. 각 Slave-이동로봇을 Master-이동로봇으로부터 받은 위치 좌표로 로봇간의 거리와 방향을 계산하며 이를 토대로 군집 로봇의 이동 알고리즘을 구현하였다. 본 논문에서는 군집간 제어를 위해 군집 로봇 시스템을 제작하였으며 상대적인 위치, 거리 유지, 진행방향을 계산한다. Master-이동로봇과 Slave-이동로봇 간의 1:N 실시간 통신과 일정거리를 유지함으로써 군집간 제어를 하였다.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.4
• /
• pp.120-131
• /
• 2004

In this paper, we propose the method of a motion planning generation in which the movement of the 3-link leg subsystem is constrained to a slider-link and a singular posture can be easily avoided. The proposed method is the jumping control moving in vertical direction which mimics a cat's behavior. That is, it is jumping toward wall and kicking it to get a higher-place. Considering the movement from the point of constraint mechanical system, the robotic system which realizes the motion changes its configuration according to the position and it has several phases such as; ⅰ) an one-leg phase, ⅱ) in an air-phase. In other words, the system is under nonholonomic constraint due to the reservation of its momentum. Especially, in an air-phase, we will use a control method using state transformation and linearization in order to control the landing posture. Also, an iterative learning control algorithm is applied in order to improve the robustness of the control. The simulation results for jumping control will illustrate the effectiveness of the proposed control method.

• The Journal of Korea Robotics Society
• /
• v.15 no.4
• /
• pp.357-364
• /
• 2020

Indoor localization using an artificial marker plays a key role for a robot to be used in a service environment. A number of researchers have predefined the positions of markers and attached them to the positions in order to reduce the error of the localization method. However, it is practically impossible to attach a marker to the predetermined position accurately. In order to visualize the position of an object in the environment based on the marker attached to them, it is necessary to consider a change of marker's position or the addition of a marker because of moving the existed object or adding a new object. In this paper, we studied the method to estimate the artificial marker's global position for the visualization of environment. The system calculates the relative distance from a reference marker to others repeatedly to estimate the marker's position. When the marker's position is changed or new markers are added, our system can recognize the changed situation of the markers. To verify the proposed system, we attached 12 markers at regular intervals on the ceiling and compared the estimation result of the proposed method and the actual distance. In addition, we compared the estimation result when changing the position of an existing marker or adding a new marker.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.14 no.5
• /
• pp.539-544
• /
• 2004

We investigate a visual object tracking algorithm based upon particle filters, namely CONDENSATION, in order to combine multiple observation models such as active contours of digitally subtracted image and the particle measurement of object color. The former is applied to matching the contour of the moving target and the latter is used to independently enhance the likelihood of tracking a particular color of the object. Particle filters are more efficient than any other tracking algorithms because the tracking mechanism follows Bayesian inference rule of conditional probability propagation. In the experimental results, it is demonstrated that the suggested contour tracking particle filters prove to be robust in the cluttered environment of robot vision.

• Convergence Security Journal
• /
• v.6 no.3
• /
• pp.37-47
• /
• 2006

In this research, We connect the terrestrial magnetism sensor of the Philips to a bluetooth communication system and measured 360 degree of the azimuth change the angle with an incline of 5 degrees to an order direction. The value of the azimuth to be measured sent to the Bluetooth communication system and analyzed the measuring value in the 100m as moved. Using the bluetooth, we could send the measuring value of the azimuth without the bearing error in the plain without an electric wave obstacle within a distance in straight line 100M. We got the value of the azimuth have 98% reliability to maintain at a level with the terrestrial magnetism sensor. Based on this research. We send the measuring value of the azimuth which the accuracy is improved to a mobile intelligent robot moving a land inclined equipped with this system and can track the azimuth of it.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.10
• /
• pp.1551-1560
• /
• 1997

This study is devoted to the detection of the 3-dimensional point obstacles on the plane by using accumulated scan line images. The proposed accumulating only one scan line allow to process image at real time. And the change of motion of the feature in image is small because of the short time between image frames, so it does not take much time to track features. To obtain recursive optimal obstacles position and robot motion along to the motion of camera, Kalman filter algorithm is used. After using Kalman filter in case of the fixed environment, 3-dimensional obstacles point map is obtained. The position and motion of moving obstacles can also be obtained by pre-segmentation. Finally, to solve the stereo ambiguity problem from multiple matches, the camera motion is actively used to discard mis-matched features. To get relative distance of obstacles from camera, parallel stereo camera setup is used. In order to evaluate the proposed algorithm, experiments are carried out by a small test vehicle.