Journal of the Korean Society for Precision Engineering (한국정밀공학회지)

Korean Society for Precision Engineering (한국정밀공학회)
권호 표지

A Study on Motion Planning Generation of Jumping Robot Control Using Model Transformation Method

모델 변환법을 이용한 점핑 로봇 제어의 운동경로 생성에 관한 연구

  • 서진호 (동아대학교 전기전자컴퓨터공학부) ;
  • 산북창의 (동경공업대학 제어시스템공학과) ;
  • 이권순 (동아대학교 전기전자컴퓨터공학부 국가지정연구실(NRL))
  • Published : 2004.04.01
Download PDF
⟨ Previous Next ⟩

Abstract

In this paper, we propose the method of a motion planning generation in which the movement of the 3-link leg subsystem is constrained to a slider-link and a singular posture can be easily avoided. The proposed method is the jumping control moving in vertical direction which mimics a cat's behavior. That is, it is jumping toward wall and kicking it to get a higher-place. Considering the movement from the point of constraint mechanical system, the robotic system which realizes the motion changes its configuration according to the position and it has several phases such as; ⅰ) an one-leg phase, ⅱ) in an air-phase. In other words, the system is under nonholonomic constraint due to the reservation of its momentum. Especially, in an air-phase, we will use a control method using state transformation and linearization in order to control the landing posture. Also, an iterative learning control algorithm is applied in order to improve the robustness of the control. The simulation results for jumping control will illustrate the effectiveness of the proposed control method.

Keywords

References

  1. Yamakita, M. and Furuta, K., 'Iterative Generation of Virtual Reference for a Manipulator,' Journal of Robotica, Vol. 9, pp. 71-80,1991 https://doi.org/10.1017/S0263574700015587
  2. Yamakita, M. and Furuta, K., 'A Design of Learning Control System for Multivariable Systems,' Asia-Pacific Engineering Journal, Part A, Vol. 2, No. 1, pp. 97-118, 1992
  3. Tadokoro, S. and Takamori, T., 'An Evaluation Method for Dexterity of Robot Manipulators considering Deviation of Direction of Motions,' Trans. on SICE, Japan, Vol. 29, No. 6, pp.668-676, 1993 https://doi.org/10.9746/sicetr1965.29.668
  4. Honda, K., 'A Control of Nonholonomic Bounce Gait Systems,' A Master's thesis, Dept. of Control and System Eng., Tokyo Institute of Technology, Japan, 1999
  5. Yamaita, M. and Omagari, Y, 'Jumping Cat Robot with Kicking a Wall,' In Proceedings of Adaptive Motion of Animals and Machines, 2000
  6. Suh, J. H., Omagari, Y, Yamakita, M. and Kim, S. B. 'Jumping Control Design for a Cat Robotic System,' In Proceedings of the International Conference on Science-Technology, pp. 89-97, 2002
  7. Suh, J. H., Yamakita M. and Kim, S. B., 'Jumping Control of Cat Robotic System by Model Transformation Method,' 2002 the Annual Conference of KIEE, pp. 2427-2429, 2002
  8. Kam, B. O., Jeon, Y B., Suh, J. H., Oh, M. S. and Kim, S. B., 'Motion Control of Two-Wheeled Welding Mobile Robot with Seam Tracking Sensor,' International Journal of the Korean Society of Precision Engineering, Vol. 4, No. 2, pp. 30-38, March, 2003
  9. Moon, B. Y, Son, K., Park, J. H. and Suh, J. T, 'A Method to Describe and Analyze Human Knee Joint Motion,' Journal of the Korean Society of Precision Engineering, Vol. 20, No. 10, pp. 233-239, 2003
  10. International Journal of the Korean Society of Precision Engineering v.4 no.2 Motion Control of Two-Wheeled Welding Mobile Robot with Seam Tracking Sensor Kam,B.O.;Jeon,Y.B.;Suh,J.H.;Oh,M.S.;Kim,S.B.
  11. Jorunal of the Korean Society of Precision Enginering v.20 no.10 A Method to Describe and Analyze Human Knee Joint Motion Moon,B.Y.;Son,K.;Park,J.H.;Suh,J.T.