• Proceedings of the Korean Geotechical Society Conference
• /
• 2003.03a
• /
• pp.663-670
• /
• 2003

Urban tunnelling need to consider not only the stability of tunnel itself but also the ground movement regarding adjacent structures. This paper present 3-D behavior of adjacent structures due to tunnelling induced ground movements by means of field measuring data and nonlinear FEM tunnel analysis. The results of the analytical methods from Mohr-Coulomb model are compared with the site measurement data obtained during the twin tunnel construction. It was found that the location and stiffness of the structure influence greatly the shape and pattern of settlement trough. The settlement trough for Greenfield condition was different from the trough for existing adjacent structures. Therefore the load and stiffness of adjacent structures should be taken into account for the stability analysis of the structures.

• Korean Journal of Applied Biomechanics
• /
• v.25 no.3
• /
• pp.363-370
• /
• 2015

Objective : The purpose of this study was to give the basic data for the cutting movement with the various angels on the poly urethane. Method : Ten healthy men voluntarily participated in this study. A three-dimensional motion analysis system (VICON) and force plates were used to analyze the movements of the joints for the lower extremities. For the statistical analysis the IBM SPSS 21.0 was used to perform repeated measured ANOVA and post-hoc comparison result was used to perform the Scheffe and the level of significance was set up at ${\alpha}=.05$. Results : There were significant differences for the time required for the increasing angles of the cutting movement(p<.05). In addition, there were significant differences for the maximum dorsiflexion, plantarflexion of ankle joint, maximum flexion of knee joint and hip joint with the increasing the angles of cutting movement(p<.05). Also, there were significant differences for the maximum adduction and abduction angle of the hip joint with the increasing of the angles of cutting movement. There was signigicant difference for the resultant utilized coefficient of friction(RuCOF) for the increasing angles of cutting movement(p<.05). Conclusion : There was a pattern to increase the coefficient friction with the angle of cutting direction. Also, it would be possible to use the poly urethane for the outdoor floor with the results of this study.

• Proceedings of the IEEK Conference
• /
• 2003.07c
• /
• pp.2887-2890
• /
• 2003

This paper describes the possibility of analyzing gait pattern from the variation of the lower leg electrical impedance. This impedance is measured by the four-electrode method. Two current electrodes are applied to the thigh, knee, and foot, and two potential electrodes are applied to the lateral, medial, and posterior position of lower leg. The correlation coefficients of the joint angle and the impedance change from human leg movement was obtained using electrogoniometer and 4ch impedance measurement system developed in this study. We found the optimal electrode position for ankle, knee and hipjoint movements based on high correlation coefficient, least interference, and maximum magnitude of impedance change. The correlation coefficients of the ankle, knee, and the hip movements -0.87, 0.957 and 0.80. respectively. From such features of the lower leg impedance, it has been made clear that different movement patterns exhibit different impedance patterns and impedance level. This system showed possibility that lower leg movement could be easily measured by impedance measurement system with a few skin-electrodes.

• Journal of Embryo Transfer
• /
• v.14 no.1
• /
• pp.47-57
• /
• 1999

Among proteins separated from methanol extract of follicular fluid with superose column, the components inducing sperm swim-up separation through sucrose layer were analysed with superose column in Smart system and SDS-PAGE. And the results obtained were as follows; The fractions of retention volume (RV) 0.83ml and RV 1.36ml separated with superose column should stimulate sperm migration and movement. However, RV 0.83 fraction was consisted of complex materials containing RV 1.36 component. RV 1.36 fraction contained a BSA analogue of 67 kilodaltons (Kd) and showed identical peak pattern with BSA fraction V. In conclusion, the protein of 67 Kd in follicular fluid should stimulate sperm migration and movement.

• Journal of Korean Association for Spatial Structures
• /
• v.18 no.2
• /
• pp.25-34
• /
• 2018

This study investigated a bio-tensegrity structural system that combines the characteristics of a general tensegrity structural system with a biological system. The final research objective is to accomplish a changeability for the structural system as like the movement of the natural bio-system. In the study, we present a shape finding procedure for the two stage bio-tensegrity system model inspired by the movement pattern of animal backbone. The proposed system is allowing a dynamic movement by introducing the concept of "saddle" for the variable bio-tensegrity structure. Several shape finding analysis example and results are presented and shows a efficient validation and suitability.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.4
• /
• pp.456-464
• /
• 2013

Passive sonar in submarine can detect the target in long range and can attack using it. There are many noises which can be received at passive sonar of submarine. When noise received in the sonar it make diverse interference pattern depend on the ocean ambient and movement scenario. Interference pattern can be explained by theory of waveguide invariant. In this paper, analyze the interference pattern according to the relative motions of surface ship and submarine. And analyze the occurrence reason of 2 kinds of interference patterns those are usually display on the submarine console. The results show that if relative speed of submarine and target increase then gradient of interference pattern will increase. And closest point approach of submarine and target decrease then gradient of interference pattern will increase. Bathtube pattern usually appear when target pass though close to submarine and Pinetree pattern appear target pass though above of submarine.

• Journal of the Korean Home Economics Association
• /
• v.47 no.4
• /
• pp.61-72
• /
• 2009

The purpose of this research is to suggest a new way to approach measuring the waist line of slacks. The pattern formulated enables a construction method that optimizes motion. The method is based on the measurement on the length change of the body surface line. The research reveals: 1. The analysis of expansion and contraction by area showed that G8 markedly shrunk, whilst G15 maximally stretched during M4 motion. 2. The areas that stretched during M2 motion were, in order of size: G10, G17, G16, and G8. Conversely, the areas that shrunk are, in order, G9, G11, and G18. The areas that stretched during M3 motion were G10, G17, G16, G12, and G15; the areas that shrunk were G9, G11, G18, and G8. 3. In constructing the slacks pattern to allow for appropriate movement, we calculated the length between the knee and back of the waist, point (y), using Pythagoras’theorem and trigonometry. The equation was y = 1.005x. 4. In the two pattern N method and L method, y is equal or less than x, but for our research pattern, y was larger than x

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.3
• /
• pp.461-467
• /
• 2019

Advances in location-aware and IoT (Internet of Things) technology increase the rapid generation of massive movement data. Knowledge discovery from massive movement data helps us to understand the urban flow and traffic management. This paper proposes a method to analyze frequent origin-destination sequence patterns from irregular spatiotemporal taxi pick-up locations. The proposed method starts by conducting cluster analysis and then run a frequent sequence pattern analysis based on identified clusters as a base unit. The experimental data is Seoul taxi trajectory data between 7 a.m. and 9 a.m. during one week. The experimental results present that significant frequent sequence patterns occur within Gangnam. The significant frequent sequence patterns of different regions are identified between Gangnam and Seoul City Hall area. Further, this study uses administrative boundaries as a base unit. The results based on administrative boundaries fails to detect the frequent sequence patterns between different regions. The proposed method can be applied to decrease not only taxis' empty-loaded rate, but also improve urban flow management.

• Physical Therapy Korea
• /
• v.2 no.2
• /
• pp.1-8
• /
• 1995

이 논문의 주목적은 정상인을 대상으로 각기 다른 3가지의 (체중의 1.5 %, 3.0 %, 9.0 %) 부하를 통해서 자세의 불균형을 유발시켰을 때 나타나는 postural movement patterns을 기술하기 위한 연구이다. 연구대상의 허리중심에 체중부하를 주어 균형이 뒤로 이동하게 하여, surface EMG(표면 근전도)를 통하여 Tibialis anterior(Ta), Gastrocnernius(Gc), Quadriceps femoris(Qc), Hamstring(Ha), Rectus abdominalis(Ab)와 Paraspinalis(Pa) 근육들의 motor recruitment pattern(운동회집형태)를 측정하였다. 그리고 비디오 촬영은 고관절, 슬관절, 족관절의 움직임을 보기 위해 사용하였다. 특히 근전도 (EMG)는 자세반응 검사에 있어 첫 근반응(근수축) 경과시간(FR)과 분절간격간의 (ID)시간을 조사하는데 사용되었다. 이 연구의 결과는 4가지 중요한 사실을 전해주고 있다. 첫 번째로서, 연구대상자에게 체중의 1.5 %의 부하를 적용하였을 때 Ta가 가장 먼저 수축을 시작하였고(FR:$88{\pm}19.4$ ms) 발목과 대퇴사이의 분절 간격간(ID)의 평균은 +9.3 ms였다. 또한 족관절의 변화가 가장 뚜렷하여 Nashner(1985)의 족기전을 뒷받침하고 있다. 둘째로는 연구대상자에게 체중의 3.0 %의 부하를 주었을 때 Qc와 Ab근육이 원위부에서 근위부 순서로 수축하였고, 첫 번째 근육수축시간은 ($82{\pm}39.2$ ms)였다. 그리고 이때 분절간격의 평균은 +8.3ms 이였고 Ta는 거의 반응하지 않았다. 족관절과 슬관절에 비해 고관절의 변화가 가장 현저하게 나타났고, 이 또한 Nashner의 고관절 기전과 같은 현상을 보였다. 셋째로 연구 대상자에게 체중의 9.0 % 부하를 허리에 적용하였을 때 근수축은 근위부에서 원위부 순서를 이루어졌다. 즉 Ab,Qc, Ta, Ps순으로 근수축 되었다. Ab가 처음으로 수축하여 첫 반응(FR)은 $73{\pm}3.2$ ms 이였고 슬관절과 고관절의 변화가 가장 뚜렷하였다. 넷째로 연구 대상자에게 체중의 9.0 %부하를 적용하였을 때, 균형을 잡기 위해 뒷걸음치는 것이 관찰되었고 이때 근수축 순서는 Ta,Ab.Ps,Qc,Hs였다. 이 결과는 Nasher의 결과와 불일치하였다. 이상과 같은 결과에서 연구대상자의 자세운동형태(postural movement patterns)는 각기 다른 부하 정도와 시간에 따라 합성적으로 이루어지는 것으로 보여졌다. 특히, 자세운동형태는 부하의 적용위치와 연구대상자의 최근의 경험에 영향을 받은 것으로 밝혀졌다. 결론적으로 말하면 자세운동형태는 중앙신경계의 제한적(한정적) 명령 시스템에 의해서 움직임(movement)이 발생하기 전에 조직된다는 Nashner의 가설을 뒷받침하였다.

• Journal of the Economic Geographical Society of Korea
• /
• v.11 no.2
• /
• pp.175-191
• /
• 2008

In the early stage of industrial development, most of software companies were agglomerated at the CBD(Central Business Districts) in Seoul. However, the spatial distribution pattern of Korean Software industry has been changed according to the propagation of broadband, the change in rents, the governmental policy for industrial districts. In this research, using the software year book at 1997 and 2007, the emerging new pattern was analyzed using spatial clustering analysis. As a results of research, the spatial distribution was expanded in morphological changes. However, it was found that there was not a significant difference in a degree of accumulation. In the aspect of behavioral movement of companies, they tend to be relocated from the CBD to urban fringes and their movement is related to the product life cycle in selecting the clustered place.