• E2M - 전기 전자와 첨단 소재
• /
• 제10권5호
• /
• pp.440-446
• /
• 1997

This research has been performed for the fabrication of high quality ferrite plastic magnet. The magnetic properties of S $r_{5.9}$F $e_2$ $O_3$ ferrite bonded magnets by injection moulding with a variety of applied magnetic field were investigated. 0.3wt% CaCO3, 0.2wt% $SiO_2$, 0.5wt% $Al_2$ $O_3$and 0.5wt% N $a_2$ $SiO_3$are added in order to improve the magnetic properties of Sr-ferrite plastic magnets during the powder fabrication. For carbon coating on chemical compound specimen, 5wt% polyvinyl alcohol is added, and then calcinated under $N_2$ environment of 12$25^{\circ}C$. The particle size is distributed from 0.9~1.2${\mu}{\textrm}{m}$ which approximates to the single domain. The obtained Sr ferrite powder is well mixed with silane coupling and calcium stearate of 1wt%. Nest, the specimen is pelleted after kneading each of them with polyamidel2 as a binder. When the temperature of injection and mould were 25$0^{\circ}C$ and 8$0^{\circ}C$ respectively at injection pressure of 200kgf/$\textrm{cm}^2$, the degree of orientation was 85.3% under the applied magnetic field of 12kOe. As the results, when the packing density of Sr ferrite powder was 90wt%, the magnetic properties of Sr ferrite bonded magnet were follows : $_{B}$ $H_{c}$=2.41kOe, Br=3.1kG, (BH)$_{max}$=2.21MgOe. Especially, the Sr-ferrite bonded magnet with 10wt% N $d_2$F $e_{14}$B additive were as follows : $_{B}$ $H_{c}$=2.57kOe, Br=3.14kG and (BH)$_{max}$=2.39MGOe.GOe.GOe.GOe.e.

• 패션비즈니스
• /
• 제18권3호
• /
• pp.73-90
• /
• 2014

Paper, once known and used only as a medium for printing or handicrafts, is now being used in new fields including artistic clothing, and an environment-friendly material for fashion, while the functionality of its formative characteristics and esthetics have been newly highlighted. On this basis, this study performed a content analysis of paper couture and categorization of types of paper modeling techniques based on 904 paper couture submitted to paper fashion shows, exhibitions and contest exhibits from 2001 to 2013. Analysis results showed that paper textile types were most common at 86.64%, while techniques using laminating, bonding, overlapping or paper as-is represented 62.17%. Expressive techniques in which paper was cut or torn and attached to paper clothing was 11.62%, paper folding was 5.75%, drawing and coloring 4.65%, and finally, paper cutting was 2.65%. Meanwhile, among paper modeling techniques using paper yarn textiles, a paper weaving technique was 6.75%. Moreover, other techniques in which paper modeling techniques or subsidiary clothing was blended were 3.65%, and Dak peeling textiles were 1.33%. Paper paste moulding textiles types represented 1.44%, above all papier $m{\hat{a}}ch{\acute{e}}$ techniques of 0.55% and creasing and holding techniques were 0.88%. Paper is sufficient to express the artists' creativity as well as having qualities as an artistic medium, such as variability through combined use with other materials, variation in form, suitability for reuse of waste paper, and environmental friendliness. Also, various paper modeling techniques can be blended with textiles for a generalized technology that overcomes the limits of paper and textiles.

• 한국작물학회지
• /
• 제41권5호
• /
• pp.535-541
• /
• 1996

종자가 대단히 미세하여 육묘과정에서 많은 노동력이 소요되는 담배종자를 pelleting하여 육묘과정을 생력화할 목적으로 실험을 실시하였다. Pelleting 방법은 종자+pelleting 물질(bentonite, cellulose, clay, vermiculite) + 접착제(polyox, pelgel, CMC, water)를 혼합하여 반죽을 만든 후 성형판을 이용하여 wn조식으로 pellet을 만들었다. 각 재료별 pellet 종자의 특성 및 발아율을 조사하여 다음과 같은 결과를 얻었다. 1. pellet종자의 경도는 접착제의 농도에 비례하여 강했고, 재료별로는 bentonite 가 가장 경도가 강했고 어느 재료에서나 접착제의 농도에 비례하여 강했다. 또 200, 400, 600, 800g press/pellet의 경도를 가진 pellet종자의 파괴율은 각각 7.5%, 0.9%, 0.6%, 0.5% 였다. 2. Pelleting 물질 1g으로 지름 및 높이가 각각 2mm인 pellet 종자를 cellulose, bentonite, clay에서 각각266개, 92개, 57개 만들 수 있었다. 3. 담배종자와 재료의 혼합비율에 따라 pellet종자 1입당 포함된 종자의 수를 임의로 조절할 수 있었다. 또 pellet 당 2∼3개의 종자를 목표로 했을 때 종자가 포함되지 않은 pellet은 6.9∼16.0% 였다. 4. Pellet 종자의 공기 중 수분흡수율은 재료별로 cellulose>bentonite>clay 순으로 낮았다. 5. Bentonite와 cellulose를 재료로한 pellet 종자의 발아율은 무처리(나종자)와 차이가 없었으나, clay를 재료로한 pellet종자에서는 paper towel 에서나 vermiculite 상토에서 모두 뚜렷한 발아저해 현상이 나타났다.

• International Journal of Aerospace System Engineering
• /
• 제3권1호
• /
• pp.21-24
• /
• 2016

In this study, a optimal design on the hood automotive using eco-friendly natural fiber composites is performed. The hood of an automobile is determined by dividing the Inner panel shape through optimization phase to outer panel and inner panel. It was performed to optimize the size of the thickness of the inner panel and the outer panel by applying a flax/epoxy composite materials. The optimized shape was evaluated for weight-lightening, stability and the pedestrian collision safety. Through the resin flow analysis are confirmed to molding possibility judgment of product.

• 한국가구학회지
• /
• 제13권2호
• /
• pp.1-10
• /
• 2002

A computer top table was manufactured with the solid wood wastes that has been landfilled, combustion or burnt as a fuel at the present time. The computer table is different in form and size to that of existing fixed rectangular. It is idea1 product not only convenient and functional to use and beautiful design but also processing Performance of edge area and overlaying properties. The main technologies to develop this computer top table are plan for moulder to mould the Product and producing, molding the most suitable material and composition, suitable adhesives selecting and synthetic technology, investigation for the moulding conditions such as temperature, time etc, adequate overlaying materials selecting and overlaying technology have to be chocked.

• 한국정밀공학회지
• /
• 제10권1호
• /
• pp.42-51
• /
• 1993

Recently, WC-Co have some excellent properities as the material for the mechanical component such as metallic moulding parts, ball dies parts, and punch parts. This paper describes the surface roughness and grinding force caused by experimental study on the surface grinding of WC-Co with ultra-precision like a mirror shape using diamond wheel. Also, some investigations are carried out using WA grinding wheel to increase improved ground surface roughness such as polishing, lapping effect. Some important results obtained here are summarized as follow. 1) Within this experimental grinding condition, we can be obtained $R_{max}.\;2\mu\textrm{m}\;R_a\;0.3\mu\textrm{m}$ whichare the most favourable ground surface roughness using #140 diamond wheel, and improved surface roughness values about 20 .approx. 25% throughout 5 times sparkout grinding 2) The value of surface roughness is Rmax. $0.49\mu\textrm{m},\;R_a\;0.06\mu\textrm{m}$ using #600 diamond wheel. 3) The area of no rack zone is less than $F_{n}$ 0.27N/mm, Ft 0.009N/mm

• 자원환경지질
• /
• 제16권3호
• /
• pp.149-161
• /
• 1983

경상도(慶尙道) 지역(地域)의 삼기층중(三紀層中)에 배태(胚胎)되어진 산성백토(酸性白土)는 주(主)로 Ca-몽모리로나이트로 구성되며 이의 조성비(組成比)는 95%까지에 이른다. 이에 수반되는 광물(鑛物)은 크리스토발라이트, 석영(石英), 장석(長石), 삼정석광물(三井石鑛物) 및 비결정질(非結晶質)이 있다. 시차열분석(示差熱分析), 적외선 및 전자현미경에 의한 이들의 기본적인 특성(特性)을 기재하였고 물리적성질(物理的性質)을 섭성한계(涉性限界) 및 양이온교환능을 측정기재하였다. 이들 자원(資源)의 이용가능한 용도범위를 고찰하였다.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.34-35
• /
• 2006

The development of Micro MIM as a new manufacturing process for metallic micro parts made of advanced functional materials has been the subject of considerable research over the last years. This paper addresses important quality aspects on processing of new materials by Micro-MIM. Three examples of new functional materials that can be processed are reviewed in this paper. The first example is two-component-Micro-MIM to obtain multi-functional devices. A micro positioning encoder consisting of a magnetic / non-magnetic material combination is presented. The second issue is series production of the replicate of the smallest human bone in the ear (stapes) from Titanium as an example of medical application. Quality assurance and reproducibility in terms of injection moulding parameters are addressed. In the third part, first results on the processing of the shape memory alloy NiTi by Micro-MIM are presented. Potential applications include biocompatible devices and transportation, for example automotive and aerospace. Processing routes and initial microstructures obtained are discussed.

• 한국분말재료학회지
• /
• 제18권3호
• /
• pp.262-268
• /
• 2011

In order to investigate the microstructure and mechanical properties of WC-10 wt% Co insert tool alloy fabricated by PIM (Powder Injection Molding) process, the feedstock of WC-10 wt% and wax used as a kind of binder were mixed together by two blade mixer. After injection molding, the debinding process was carried out by two-steps. First, solvent extraction, in which the binder was eliminated by putting the specimen into normal hexane for 24 hrs at $60^{\circ}C$, and subsequently thermal debinding which was conducted at $260^{\circ}C$ and $480^{\circ}C$ for 6 hrs in the mixed gas of $H_2/N_2$, respectively. Meantime, in order to compensate the decarburization due to hydrogen, 1.2~1.8% of carbon was added to ensure the integrity of the phase. Finally, the specimens were sintered in vacuum under different temperatures, and the relative density of 99.8% and hardness of 2100 Hv can be achieved when sintered at $1380^{\circ}C$, even the TRS is lower than the conventional sintering process.

• 복식문화연구
• /
• 제8권6호
• /
• pp.806-821
• /
• 2000

Each and everything named fashion together with clothes were limited in the boundary of women and men's wear has been slow and narrow in changing speed compared to women's, even there are some differences in accordance time. But maintaining the basic features, men's wear in the latter 20th century has undergone diverse change in the part of materials such as various synthetic fiber, glass, metal, artificial leather and the see-through fabric able to seeing the body wearing the clothes. Therefore, the aim and definition of this study is to present the systematic framework giving help to develop men's wear design newer and more various by considering moulding of materials which existing men's wear could not show up and by grasping material trend of men's clothes in 1990s. The results of the study were summarized as follows : (1) Material containing lustering is categorized as Velvet, Silk, Lustering materials by synthetic fiber and Lustering materials by additional substance. The Velvet generally acknowledged having something to feel womanly image shows the bisexual character coexisting feature of men and women after grafting with men'fashion. The Silk was endowed the role as means of pleasure to express beyond boundary of sex breaking the existing consciousness which men should wear male clothes, not considering differences between men and women. The lustering made by synthetic fiber expressed modern sensitivity aesthetically to the suit. The lustering materials made by additional substance is seen mixed masculine character with womanly character. (2) See-through materials are acknowledged as decadence beauty caused by expanding subjective awareness in beauty. (3) Materials by the sorts of Net is categorized as Lace, Knit The Lace expression seemed to emphases the human liberation of men and women and the humanity from liberation of subjecthood. The Knit can be felt both woman's image and man's image as bisexual image, not raising only one side sex. (4) Elastic materials offered the opportunity to approve exposure in a time when exposure of men's body was not granted ethically. (5) Leather was shown as indication of social status and inferiority and expression of collective resistance against sexual stagnation of men and women.