• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.18 no.2
• /
• pp.137-143
• /
• 2009

This paper presents the fabrication of inchworm motor for high precision actuator system of large displacement and high force. The inchworm motor consists of a extend actuator that provides displacement of tool guide and two clamping actuators which provide the holding force. In order to avoid the PZT fracture, design of pre-load housing was conducted by flexure hinge structure, because PZT actuator has low tensile and shear. To design the pre-load housing and optimize the clamping mechanism, the static and dynamic analysis were conducted by finite element method. From these results, a prototype of the inchworm motor was fabricated and dynamic characteristic with respect to the various frequency was tested. The maximum velocity of the inchworm motor was $41.1{\mu}m/s$ at 16Hz.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.5 s.98
• /
• pp.66-73
• /
• 1999

To enhance machining efficiency, tool exchange time have to be reduced. Most automatic tool changer is made up of compound cam and motor. it is not easy to design and manufacture compound cam, and it has no flexibility. But if servo motor is used, it is easy to changer is developed with servo motor, clutch, ball-screw and spline nut. Experimental results show that automatic tool changer designed with servo motor have good faculties.

• Proceedings of the KIEE Conference
• /
• 2001.04a
• /
• pp.26-29
• /
• 2001

In this paper, a brief overview of problems related to the electromagnetic, mechanical design criteria is reported. Also, we described the results about the comparisons between BLDC motor and induction motor for Turbo Compressor considering motor cost, efficiency and reliability. As a result, we select an induction motor for 12.5RT Turbo compressor for the application of small building's all-conditioning system. Finally, a prototype induction motor was manufactured and tested under compressor set. The test results were successfully met the mechanical, thermal and electromagnetic point of view.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.425-429
• /
• 2008

The present study has been conducted to improve temperature distribution in the motor housing of vacuum cleaner and reduce the development period by CFD analysis. CFD analysis is performed to investigate the thermal flow pattern in the motor housing and validated by experiments. The validation of CFD analysis is conducted by comparing the temperature distribution on motor housing cover. Through the present study the CFD analysis procedure in the motor housing of vacuum cleaner is established and various experimental materials are obtained. These analysis results can be used effectively as design factors of vacuum cleaner.

• Proceedings of the KIEE Conference
• /
• 1999.07a
• /
• pp.330-332
• /
• 1999

At the present, development of microelectronics technology caused an increase in using of induction motor for variable speed motor drive system instead of do motor. This paper is described the design of induction motor fed by inverter and analyzed 1.5kW motor performance using by finite element method (FEM).

• Proceedings of the KSR Conference
• /
• 2002.10a
• /
• pp.427-433
• /
• 2002

An inverter-driven induction motor is usually adapted to the traction motor for a high speed drive system requiring safety, reliability, performance, compact size owing to the space and weight alloted for attaching to train, etc. and AC Traction motor for G7 train will be operated in the worst condition such as mechanical vibration, limited mounting space, severe thermal stress, inverter with non-sinusoidal voltage waveform, dust and so on. therefore, design procedure must be carefully carried out wi th considering the motor size, vibration and thermal expansion of rotor bars, insulation system, reliability of frame, as well as output characteristics. In this paper, we will inform the characteristics and design of the traction motor for G7 train and also analyze the test result of it.

• Proceedings of the KIEE Conference
• /
• 2000.11b
• /
• pp.341-344
• /
• 2000

본 논문에서는 stepper motor 나 BLDC motor를 구동하기 위하여, 최신 microcontroller, PC, control IC board 등으로 구성된 새로운 시스템을 설명하는데 목적이 있다. 이 시스템에서는 인터넷으로 전송되는 microcontroller program를 이용하여 SPDS(smart power development system)을 구동시키고, 이로 인하여 dedicated drive IC를 제어하여 stepper 또는 BLDC motor를 구동시키게 되며, 원격지에 있는 사용자의 motor를 제어함을 목표로 하고 있다. 본 논문에서 사용된 drive IC 는 SGS-Thomson 제품으로써 stepper motor 용으로 L6205/6/7/8, 그리고 BLDC motor 용으로 L6235 이다. SPDS는 ST92F120 16-bit microcontroller를 사용하고 있다. 이 논문에서는 인터넷 Protocol Converter에 의한 프로그램 전송, Operating System Program 및 Driver Software Program의 생성 및 구성, Drive IC의 구성 및 특징, SPDS 의 hardware 및 software 의 구성 등에 대하여 설명한다.

• Design & Manufacturing
• /
• v.9 no.2
• /
• pp.34-37
• /
• 2015

The HEV Traction Motor Core manufacturing technology is a core component of HEV Traction Motor Core (Iron Core) is a key technology for the manufacture of eco-friendly automotive industry is essential for the competitiveness of the country must obtain the technology. In this study, the HEV Motor Core of the Rotor manufacturing technology, the Stator manufacturing technology applied to Press Lamination Die and Core(Iron Core) was developed and the results are discussed.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.11
• /
• pp.2162-2167
• /
• 2009

A Low cost and variable speed brushless motor drive system with single switch per phase is presented. The motor drive is realized with a novel two-phase flux-reversal-free switched reluctance motor and a split AC two switch converter. The strategy of the controller and the converter for its realization are described. Comparisons between a split AC converter, asymmetric converter, split DC converter, single controllable switch converter, and N+1 converter are performed for its device rating, cost, switching losses and conduction losses, and converter efficiency. The split AC converter is analyzed and simulated to verify the characteristics of the converter circuitry and control feasibility and the simulation results are presented. The efficiency with various loads is numerically estimated and experimentally compared from viewpoint of subsystem and system in details. The focus of this paper is to compare the presented motor drive system to the asymmetric converter system throughout experiments and demonstrate single switch per phase converter having comparable efficiency as the asymmetric converter system.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1444-1446
• /
• 2005

Recently most machineries have been small size and mobile type. And human body insertion type endoscope and micro robot technology has been developed. Then the motors used in this field are developed in micro size such as about 2mm in diameter. The structure of this motor is similar to a general brushless DC(BLDC) motor but because of small size there is no position sensor such as hall sensor. In this paper, a design and fabrication result of an ultra-small brushless DC motor is presented. This motor is designed to 3-phase coreless winding and operated with sensor-less type driver. Test results confirmed the feasibility of the proposed motor drive system design.