• Proceedings of the KSR Conference
• /
• 2003.10c
• /
• pp.606-610
• /
• 2003

The 200 class insulation system which adopted to traction motor have excellent dielectric strength but weaken to thermal stress therefore deterioration phenomena analysis according to thermal stress is necessary. Accelerated thermal aging tests have been used to determine thermal reliability of stator coils used as traction motor in electric multiple unit. The conventional aging test is carried on according to IEC 60034-18-31 and IEEE Std. 275-1992. Variation in insulation resistance, P.I, capacitance, dielectric loss($tan{\delta}$) and partial discharge are measured during the aging cycle. Sample coils for traction motor were tested by accelerated aging test which composed of heat, vibration and moisture. Reliability and expected life were evaluated on the insulation system for traction motor.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.152-155
• /
• 2000

PWM inverter-fed traction motor is able to occur problems by additive transient surge stress and harmonic loss in contrast with motor driven by 60Hz sine wave alternating source. Therefore in this paper, test method and standard of existed already were investigate, "thermal + electric" complex degradation test that considered additive degradation occurred by inverter drive carried out in order to obtain insulation reliability of traction motor driven by inverter. It seems that this test method confers large value of application at reliability estimation which the subject of complete motor not windings sample from now on.

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.1291-1293
• /
• 2003

The korean high speed train (350km/h), composed of 7cars that are 2 power cars, 2 motorized car and 3 trailer cars, has been developed and is under on-line test. To verify the design requirements about the functions and traction performances of this train, KRRI(Korea Railroad Research Institute) decided to evaluate traction performances of the train during on-line test. For this purpose, such as torque, velocity, voltage and current, must be measured. KRRI has developed the measurement system that can be measured vast and various signals effectively. In this paper, we introduce traction performances of korean high speed train. The traction measurement items are focused on the verification of motor block performances. Motor block are consist of 2 motor. For this test, we verified traction performances of korean high speed train.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1998.04a
• /
• pp.154-159
• /
• 1998

In this paper, BLDC spindle motor is designed using CAE/CAT to reduce structural vibration. Motor is modeled and analyzed using a finite element analysis (FEA) program and correlated to the results of modal test. Design sensitivity analysis (DSA) of frequency is carried out and validated by the modal test of modified motor manufactured. This study shows that simulation-based design can improve quality with reduced development time.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2003.02a
• /
• pp.236-238
• /
• 2003

The speed-torque characteristics of the squirrel cage induction motor is determined by the rotor resistance. This paper presents the fabrication and test results of an HTS induction motor. Conventional end rings and short bars were replaced with HTS tapes in the rotor. Test result shows that the speeds of the HTS induction motor were the same with synchronous speed up to 10Nm.

• Journal of Korean Medicine Rehabilitation
• /
• v.18 no.2
• /
• pp.45-60
• /
• 2008

Objectives : Sopung-tang(Shufeng-tang) is a famous herbal prescription that treated ischemic brain injury. This study was designed to evaluate the effects of Sopung-tang(Shufeng-tang) on congnition and motor function recovery after ischemic brain injury in rats. Methods : Male rats were divided into 4 groups. Those rats caused ischemic brain injury by occlusion of MCA as Longa method. Control group I was per os normal saline for 7 days after ischemic brain injury. Control group II was per os normal saline for 14 days after ischemic brain injury. Experimental group I(Ex I) was taken with Sopung-tang(Shufeng-tang) for 7 days after ischemic brain injury. Experimental group II(Ex II) was taken with Sopung-tang(Shufeng-tang) for 14 days after ischemic brain injury. The author carried out neurological, cognitive motor behavior tests and histological assessment. Neurological motor behavior tests consist of limb placement test, beam-walking test and horizontal wire test. Morris water maze test was used for cognitive motor behavior test. In the histological assessment test, TTC(2,3,5-triphenylteterazolium chloride) staining, Hematoxylin & Eosin staining and immunohistochemical staining were experimented. Results : 1. In neurological motor behavior tests, motor function recovery was significantly increased in the experimental groups as compared with control groups(p<0.05). Especially Ex II was significantly increased as compared with Ex I(p<0.05). 2. In Morris water maze test, congnitive motor function recovery was significantly increased in the experimental groups as compared with control group(p<0.05). Especially Ex II was significantly increased as compared with Ex I(p<0.05). 3. In the immunohistochemical staining for the expression of BDNF in hippocampus, more immune reaction was investigated in the experimental groups as compared with control groups. Especially most immune reaction was experimented in the EX II. Conclusions : According to the above results, Sopung-tang(Shufeng-tang) can treat on the congnition and motor function recovery after ischemic brain injury in rats. And it is effective method in expression of BDNF in hippocampus.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.184-188
• /
• 2001

Severe vibration was detected during test operation in motor frame of the Turbo Chiller (300RT). To identify the vibration problem, vibration measurement and modal test were carried out. From the test results, it is concluded that the severe vibration occurred due to the resonance between the motor frame horizontal mode and the motor excitation frequency. Therefore the horizontal mode of the frame could be controlled by the sensitivity analysis results for the length of the supporting plate.

• Proceedings of the KIPE Conference
• /
• 2006.06a
• /
• pp.122-124
• /
• 2006

ADD is under development for the high speed motor. This paper describes simulation and test results for obtaining the maximum output by leading angle of encoder. So we carried out the test for obtaining the optimum leading angle of encoder. Test results on the motor of 7 phases 6 poles were showed the validity of proposed methods and phase-leading angle.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.26 no.5
• /
• pp.343-352
• /
• 2006

In the present paper, the nondestructive test method was suggest to establish the bonding status of a motor case assembly composed of a steel motor case, adiabatic rubber layer and an ablative composite tube with strain data, AE(acoustic emission) signals and UT(ultrasonic test) data. And, finite element analysis was conducted to verify quantitatively the bonding status of motor case assembly under inner pressure loading. The bonding status could be judged whether the bonding status is perfect or contact condition by the data correlation study with AE signals and strain data measured from air pressure test. And, to classify the bonding status of motor case and rubber layer among bonding layers, UT method was also applied. From this study, the bonding status could be classified and detected into fourth types for all bonding layers as follows: (1) initial un-bonding, (2) perfect do-bonding during an air pressure test, (3) partially de-bonding during an air pressure test, and (4) perfect bonding.

• Journal of Korean Medicine Rehabilitation
• /
• v.18 no.3
• /
• pp.1-17
• /
• 2008

Objectives : Ohyaksungi-san(Wuyaoshunqi-san) has been used for many years as a treatment for cerebrovascular diseases in Oriental medicine. This study was designed to evaluate the effects of Ohyaksungi-san(Wuyaoshunqi-san) on cognition and motor function recovery after ischemic brain injury, and also the expression of BDNF in hippocampus. Methods : This study was designed with 4 subgroups to evaluate the effects of Ohyaksungi-san(Wuyaoshunqi-san). As control groups, group I has no treatment during 1 week after ischemic brain injury and group II has no treatment during 2 weeks after ischemic brain injury. As experimental groups, group III has been treated with Ohyaksungi-san(Wuyaoshunqi-san) during 1 week after ischemic brain injury and group IV have treated with Ohyaksungi-san(Wuyaoshunqi-san) during 2 week after ischemic brain injury. Each group has been examined by tests as follows, neurological motor behavioral tests, cognitive motor behavior test and histological test. Neurological motor behavior tests consisted of limb placement test, beam-walking test and horizontal wire test. Cognitive motor behavior test was performed by using Morris water maze. In the histological test, TTC(2,3,5-triphenylteterazolium chloride) staining, hematoxylin & eosin staining, and immunohistochemical staining were used. Results : 1. The tests for motor function recovery change had significantly good result in the experimental groups as compared with control groups(p<.05). 2. The Morris water maze test on cognition also had significantly good result in the experimental groups as compared with control groups(p<.05). 3. In the immunohistochemical staining for the expression of BDNF in hippocampus, more immune reaction was investigated in the experimental groups as compared with control groups. Especially group IV has the greatest immune reaction. Conclusions : Ohyaksungi-san(Wuyaoshunqi-san) has good effects on cognition and motor function recovery after ischemic brain injury, and also the expression of BDNF in hippocampus.