• 한국정밀공학회지
• /
• 제27권12호
• /
• pp.48-58
• /
• 2010

In this study, position tracking and force reflection control of a master-slave manipulator which will be used for handling objects contaminated by radioactivity has been addressed. Since available measurements concerning on dynamic motion of the master-slave manipulator are restricted, a simple constrained control structure was suggested. In the consideration of the uncertain dynamic behaviors of the slave manipulator which is dependent upon mass and shape of work pieces grasped and dynamic properties of the environment contacted, a simple structured sliding mode control was suggested to guarantee robustness with respect to parameter uncertainties and external disturbances. The proposed control was applied to a 1-DOF master-slave link system. The control performances were verified along with some computer simulation results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 D
• /
• pp.2821-2823
• /
• 2005

When we deal with the image data through camera lens, much works are necessary for removing image distortions and obtaining accurate informations from the raw data. However, the calibration process is very complicated and requires many trials and errors. In this paper, 3 new approach to image processing is presented by developing a H/W vision system with a tracking camera. Using motor control with encoders the proposed tracking method tells us exact displacements of a moving object. Therefore this method does not require any calibration process for pin cusion. Owing to the mobility one camera covers wide ranges and, by lowering its height, the camera also obtains high resolution of the image. We first introduce the structure of the motion analysis system. Then the construced vision system is investigated by some experiments.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.915-919
• /
• 2003

This paper presents a fuzzy-motion-control based tracking algorithm of mobile robots, which uses the geometrical information derived from the active stereo-vision system mounted on the mobile robot. The active stereo-vision system consists of two color cameras that rotates in two angular dimensions. With the stereo-vision system, the center position and depth information of the target object can be calculated. The proposed fuzzy motion controller is used to calculate the tracking velocity and angular position of the mobile robot, which makes the mobile robot keep following the object with a constant distance and orientation.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.1322-1326
• /
• 1990

In this paper, compliant motion control of a manipualator in manipulator is proposed by using the self-tuning adaptive controller. Compliant motion is needed in order to applicated to complicated and accurate fields such as assembly operation in which several parts are matched. For a control method of compliant motion hybrid control is used so forces and position control are proposed selectively through a closed feedback loop. By contacting with environment, the uncertainties higher. Self-tuning controller which adapts to variable dynamic response is applied to compliant motion control in order to satisfy the desired operation. The applicability of the suggested algorithm was confirmed by simulation of the contour tracking task of four joint manipulator.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년 학술대회 논문집 정보 및 제어부문
• /
• pp.324-326
• /
• 2006

This paper present backstepping control approach for controling chaotic Liu system. The proposed method is a systematic design approach and consists in a recursive procedure that interlaces the choice of a Lyapunov Function. Based on Lyapunov stability theory, control laws are derived. We used the same technique to enable stabilization of chaotic motion to a steady state as well as tracking of any desired trajectory to be achieved in a systematic way. Numerical solution are shown to verify the result.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 합동 추계학술대회 논문집 정보 및 제어부문
• /
• pp.307-310
• /
• 2001

Mobile AGV is one of the nonholon-omic systems. The integration of the kinematic adaptive controller for the dynamic in this pa-per introduction a motion control problem's dynamic state feedback as well as output feedback tracking laws will be constructed with the adaptive extension of the controller is proposed. Feedback control strategies for mobile AGV are important to compensate for disturabances and errors in the initial condition. The problems of path following or tracking and of stabilization about a constant configuration have been treated as separate problems for nonholonomic mobile AGV.

• 정보처리학회논문지B
• /
• 제14B권4호
• /
• pp.311-320
• /
• 2007

본 논문에서는 강건한 얼굴 포즈 추정과 실시간 표정제어가 가능한 비전 기반 3차원 얼굴 모델의 자동 표정 생성 방법 및 시스템을 제안한다. 기존의 비전 기반 3차원 얼굴 애니메이션에 관한 연구는 얼굴의 움직임을 나타내는 모션 추정을 반영하지 못하고 얼굴 표정 생성에 초점을 맞추고 있다. 그러나, 얼굴 포즈를 정확히 추정하여 반영하는 작업은 현실감 있는 얼굴 애니메이션을 위해서 중요한 이슈로 인식되고 있다. 본 연구 에서는 얼굴 포즈추정과 얼굴 표정제어가 동시에 가능한 통합 애니메이션 시스템을 제안 하였다. 제안된 얼굴 모델의 표정 생성 시스템은 크게 얼굴 검출, 얼굴 모션 추정, 표정 제어로 구성되어 있다. 얼굴 검출은 비모수적 HT 컬러 모델과 템플릿 매칭을 통해 수행된다. 검출된 얼굴 영역으로부터 얼굴 모션 추정과 얼굴 표정 제어를 수행한다. 얼굴 모션 추정을 위하여 3차원 실린더 모델을 검출된 얼굴 영역에 투영하고 광류(optical flow) 알고리즘을 이용하여 얼굴의 모션을 추정하며 추정된 결과를 3차원 얼굴 모델에 적용한다. 얼굴 모델의 표정을 생성하기 위해 특징점 기반의 얼굴 모델 표정 생성 방법을 적용한다. 얼굴의 구조적 정보와 템플릿 매칭을 이용하여 주요 얼굴 특징점을 검출하며 광류 알고리즘에 의하여 특징점을 추적한다. 추적된 특징점의 위치는 얼굴의 모션 정보와 표정 정보의 조합으로 이루어져있기 때문에 기하학적 변환을 이용하여 얼굴의 방향이 정면이었을 경우의 특징점의 변위인 애니메이션 매개변수(parameters)를 계산한다. 결국 얼굴 표정 복제는 두 개의 정합과정을 통해 수행된다. 애니메이션 매개변수 3차원 얼굴 모델의 주요 특징점(제어점)의 이동은 획득된 애니메이션 매개변수를 적용하여 수행하며, 정점 주위의 부가적 정점의 위치는 RBF(Radial Basis Function) 보간법을 통해 변형한다. 실험결과 본 논문에서 제안된 비전기반 애니메이션 시스템은 비디오 영상으로부터 강건한 얼굴 포즈 추정과 얼굴의 표정변화를 잘 반영하여 현실감 있는 애니메이션을 생성함을 입증할 수 있었다.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 춘계학술발표대회 논문집
• /
• pp.31-36
• /
• 2009

There have been many solar tracking systems developed for the high accuracy in solar tracking. One of the key components of any motion control system is software. LabVIEW offers an ideal combination of flexibility, ease-of-use and well-integration with other I/O pieces for developing solar tracking system. Real-time solar positions which vary with GPS's data are used simultaneously to control the solar tracker by a chain of operating modes between the open and closed loops. This paper introduces a step by step procedure for the fabrication and performance assessment of a precision solar tracking system. The system developed in this study consists of motion controllers, motor drives, step-motors, feedback devices and application. CRD sensors are applied for the solar tracking system which play a primary role in poor conditions for tracking due to a gear backlash and a strong wind. Mini-dish was used as a concentrator for collecting sun light. The solar position data, in terms of azimuth and elevation, sunrise and sunset times was compared with those of KASI(Korea Astronomy & Space Science Institute). The results presented in this paper demonstrate the accuracy of the present system in solar tracking and utilization.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1988년도 한국자동제어학술회의논문집(국내학술편); 한국전력공사연수원, 서울; 21-22 Oct. 1988
• /
• pp.443-447
• /
• 1988

• 한국정밀공학회지
• /
• 제22권9호
• /
• pp.77-84
• /
• 2005

In most vision applications, we are frequently confronted with determining the position of object continuously. Generally, intertwined processes ire needed for target tracking, composed with tracking and control process. Each of these processes can be studied independently. In case of actual implementation we must consider the interaction between them to achieve robust performance. In this paper, the robust real time visual tracking in complex background is considered. A common approach to increase robustness of a tracking system is to use known geometric models (CAD model etc.) or to attach the marker. In case an object has arbitrary shape or it is difficult to attach the marker to object, we present a method to track the target easily as we set up the color and shape for a part of object previously. Robust detection can be achieved by integrating voting-based visual cues. Kalman filter is used to estimate the motion of moving object in 3D space, and this algorithm is tested in a pan/tilt robot system. Experimental results show that fusion of cues and motion estimation in a tracking system has a robust performance.