• 한국해양공학회지
• /
• 제14권4호
• /
• pp.35-42
• /
• 2000

The sway control problem of the pendulum motion of a container hanging on the trolly, which transports containers from a container ship to trucks, is considered in the paper. In the container crane control problem, suppressing the residual swing motion of the container at the end of acceleration or the case of that the unexpected disturbance input exists is main issue. For this problem, in general, the trolley motion control strategy is introduced and applied. But in this paper, we introduce and synthesize a new type of swing motion control system. In this control system, a small auxiliary mass is installed on the spreader. And the actuator reacts against the auxiliary mass, applying intertial control forces to the container to reduce the swing motion in the desired manner. In this paper, we apply the LMI approach and simultaneous optimization design method to design the anti-swing motion control system for the controlled plant. And the simulation result shows that the proposed control strategy is shown to be robust to disturbances like winds and initial sway motion.

• 조명전기설비학회논문지
• /
• 제25권8호
• /
• pp.39-47
• /
• 2011

The motion of a conductive spherical particle under uniform electric field is investigated in order to find a suitable method for removing the conducting solid impurities contained in liquid plastic. When the positive dc voltage applied to the upper electrode, the vertical up-and-down motion of a charged particle by electrostatic force is observed by a charge-coupled device (CCD) camera or a high-speed video camera. The experimental data of the static threshold voltage by which the particle starts to move toward the counter electrode in air or silicone oil are in good agreement with theoretical value. When the applied voltage is larger than the static threshold voltage, the particle motion pattern in silicone oil consists of four stages: upward motion, stopping at the upper electrode, downward motion and stopping at the lower electrode. The stopping motion on the electrode is thought to be caused by the liquid flow accompanied by the particle motion. The particle charge calculated by integrating the pulse current, which is generated by the charge exchange between the electrode and the particle, is approximately 0.1~0.25 times of the theoretical value. This study is expected to help understand the electric properties of microparticles in oil circuit breaker (OCB) and oil transformer and improve their performance and longevity.

• 한국정밀공학회지
• /
• 제15권12호
• /
• pp.37-47
• /
• 1998

This study discusses the feed dog feeding mechanism of an industrial lock stitch sewing machine, which is a good example to study a machine kinematics. The feed dog feeding mechanism makes the fabrics directly be fed by an elliptic motion of the feed dog that is moved by a rotation of the top shaft and controlled by the feeding control mechanism. This study makes mathematical expressions of machine's motion in the feed dog feeding mechanism. Thus, the motions of this mechanism are characterized, namely how an elliptic motion of the feed dog is affected by the feeding control mechanism. Therefore, the above mathematical expressions may be a basis for the new design of the feed dog feeding mechanism and may be adapted to analysis. Development of the similar feed dog feeding mechanism can be applied to other type sewing machine.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제12권2호
• /
• pp.121-130
• /
• 2012

This paper proposes an intuitive real-time robot control system using human body movement. Recently, it has been developed that motion generation for humanoid robots with reflecting human body movement, which is measured by a motion capture. However, in the existing studies about robot control system by human body movement, the detailed structure information of a robot, for example, degrees of freedom, the range of motion and forms, must be examined in order to calculate inverse kinematics. In this study, we have proposed Associative Motion Generation as humanoid robot motion generation method which does not need the detailed structure information. The associative motion generation system is composed of two neural networks: nonlinear principal component analysis and Jordan recurrent neural network, and the associative motion is generated with the following three steps. First, the system learns the correspondence relationship between an indication and a motion using training data. Second, associative values are extracted for associating a new motion from an unfamiliar indication using nonlinear principal component analysis. Last, the robot generates a new motion through calculation by Jordan recurrent neural network using the associative values. In this paper, we propose a real-time humanoid robot control system based on Associative Motion Generation, that enables user to control motion intuitively by human body movement. Through the task processing and subjective evaluation experiments, we confirmed the effective usability and affective evaluations of the proposed system.

• 사물인터넷융복합논문지
• /
• 제2권2호
• /
• pp.1-6
• /
• 2016

최근 다양한 형태의 착용형 컴퓨터가 연구되고 있다. 본 논문에서는 사용자가 음악을 들으며 사용할 수 있는 모션헤드셋의 동작분류기 제작을 위해 머리 움직임 정보의 특징을 분석한다. 모션헤드셋 프로토타입은 스마트폰과 블루투스 통신 방법을 이용하여 음악을 수신받으며, 가속도센서가 측정한 동작정보를 스마트폰으로 전송한다. 그리고 스마트폰에서는 모션 분류기를 통해 머리의 움직임을 분류한다. 실험을 위해 프로토타입을 제작하였다. 사용자 머리의 '위', '아래', '왼쪽', 그리고 '오른쪽' 머리 움직임을 베이지안 분류기를 이용하여 분류하였다. 그 결과 '위'와 '아래'의 머리 움직임의 경우 x, z축의 가속도 센서값이 큰 변화가 있었다. 추후에 사용성 평가를 통해 동작 분류기를 제작할 수 있는 적합한 변수를 찾아 낼 계획이다.

• 한국융합학회논문지
• /
• 제10권3호
• /
• pp.135-140
• /
• 2019

본 연구는 가상환경 기반 VR(가상환경)과 실사 환경 기반 VR 중심으로 콘텐츠의 환경에서 사이버 멀미 요인을 분석하는 데 목적이 있다. 1차로 문헌연구를 통해 사이버 멀미의 원인을 규명하기 위해 3D 애니메이션과 다큐멘터리에 관한 이론을 정리하였다. 멀미 정도에 대한 측정 도구로써는 표준화된 SSQ(Simulator Sickness Questionnaire) 설문지를 활용하여 증상 값을 측정하였다. 측정 후에는 SSQ 설문지를 바탕으로 심층 인터뷰를 진행하였다. 연구 결과는 첫째, 가상환경 기반 VR보다는 실사 환경 기반 VR의 콘텐츠가 사이버 멀미를 유발한다, 둘째, VR 콘텐츠는 강한 채도 값이 사이버 멀미를 유발한다. 본 연구는 VR 초기 콘텐츠를 구성하는데 디자인 가이드라인으로 활용할 수 있으며, 사이버 멀미 연구에 활용할 수 있을 것으로 기대한다.

• 대한통합의학회지
• /
• 제10권1호
• /
• pp.119-128
• /
• 2022

Purpose : The purpose of this study was to examine the effects of applying occupational therapy that uses motion recognition on the physical self-efficacy, visual-motor integration ability, and play skills of children who have neurodevelopmental disorder before and after treatment. Methods : This The study chose 16 children with neurodevelopmental disorder as research subjects who were randomly and evenly allocated into an experimental group and a control group. The experiment followed a pretest-posttest design. As an intervention, the experimental group received motion recognition-based occupational therapy and a separate sensory integration program. The control group only participated in the separate sensory integration program. The eight-week experiment duration included 24 intervention sessions where the a 50-minute session was implemented three times a week for eight weeks. To compare the physical self-efficacy, visual-motor integration ability, and play skills before and after the intervention, measurement tools including the Physical self efficacy, Beery VMI-6, and Penn interactive peer play scale were used. All measured variables were analyzed and expressed as mean, standard deviation and percentage. Results : The motion recognition-based occupational therapy demonstrated a significant effect on improving the physical self-efficacy, visual-motor integration ability, and play skills of the experimental group. The intervention also caused a significant difference between the experimental group and control group in terms of the physical self-efficacy, visual-motor integration ability, and play skills. Conclusion : We confirmed the possibility motion recognition-based occupational therapy could be effective in improving the physical self-efficacy, visual-motor integration ability, and play skills for patients who have neurodevelopmental disorder. Based on the study result, further future studies are expected based on this study result that prove the application effect of the motion recognition-based occupational therapy using disabled and non- disabled children as subjects are expected in the future.

• 한국해양공학회지
• /
• 제31권3호
• /
• pp.196-201
• /
• 2017

A cylindrical structure has a very long period of heave and pitch motion response in ocean waves. To obtain the dynamic stability of a cylindrical structure, it is necessary to obtain the suitable metacentric height (GM). However, in a structure with sufficient metacentric height, Mathieu instability can occur if the natural frequency of the heave motion is double the natural frequency of the roll and pitch motion. This study carried out numerical calculations and experiments for vertical-axis wind turbines with cylindrical floaters, which had three different centers of gravity. In the regular wave experiment, the divergence of the structure motion without yaw was observed when the natural frequency of the heave motion was double the natural frequency of the roll and pitch motion. In the irregular wave experiment, the motion spectra of the structures with the different centers of gravity were compared, and one was very high when the natural frequency of the heave motion was double the natural frequency of the roll and pitch motion.

• 한국의류산업학회지
• /
• 제17권4호
• /
• pp.635-645
• /
• 2015

This study analyzed the range of motion of upper body in different configurations of firefighters' protective clothing and equipment. The purpose of this study was to understand the influence of firefighters' protective clothing and equipment over upper body motion in order to improve design of firefighters' protective clothing and equipment. 12 firefighters' upper body range of motion was analyzed while performing standing and walking trials in five different garment configurations including turnout ensemble, fire boots and the self-contained breathing apparatus. Analysis of upper body range of motion included spinal joints of L5S1, L4L3, T1C7, and C1Head. During standing trials, garment configurations caused a significant difference in range of motions at joints of L5S1, L4L3, T1C7, and C1Head. Analysis on the mean of range of motions at L5S1 and L4L3, showed that firefighters' waist bent forward significantly to a greater extent while they wore a self-contained breathing apparatus. A significantly increased range of motion was found for T1C7 and C1Head while carrying a self-contained breathing apparatus, which indicated an increase in the extension of the trunk and neck backward to stand upright and look squarely. A significant difference in range of motion was also found for L5S1 and L4L3 during walking trials.

• 한국의상디자인학회지
• /
• 제14권2호
• /
• pp.75-87
• /
• 2012

This study aims at measuring and comparing the joint range of motion(ROM) of the elderly, quantitatively understanding the joint ROM and duration for their dressing and undressing of pants with 3D motion analysis equipment, and thereby providing basic data necessary for the future development of clothes carrying functional designs. The findings are as follows. As for the study method, the 9-item joint ROM measurements were conducted with goniometer, and the questionnaire analyses were carried out for t-test, ANOVA, and regression analysis with spss12.0 program. The 3D motion analyses were handled with 3D Motion Analysis Package Version 3.1 Program. The findings are as follows. First, the ROM was shown to be significantly low, as the arthritis-pain consciousness level was felt higher by the subject than the average one. Seven ROM variables, such as hip flexion, hip adduction, hip internal rotation, hip external rotation, knee flexion, ankle dorsiflexion, and ankle plantar flexion, were shown to significantly affect the discomfort level experienced at the time of dressing or undressing. Second, in the motion of inserting the remaining leg into the pant crotch part(3e), the difference of angles in the hip joint and knee joint was the largest between the women in their 20s and the elderly women with arthritis. Third.