• 천문학회지
• /
• 제42권3호
• /
• pp.33-37
• /
• 2009

We propose a diagnostic that can resolve the planet/binary degeneracy of central perturbations in caustic-crossing high-magnification microlensing events. The diagnostic is based on the difference in the morphology of perturbation inside the central caustics induced by a planet and a wide-separation binary companion. We find that the contours of excess exhibit a concentric circular pattern around the caustic center for the binary-lensing case, while the contours are elongated or off-centered for the planetary case. This difference results in the distinctive features of the individual lens populations in the residual of the trough region between the two peaks of the caustic crossings, where the shape of the residual is symmetric for binary lensing while it tends to be asymmetric for planetary lensing. We determine the ranges of the planetary parameters for which the proposed diagnostic can be used. The diagnostic is complementary to previously proposed diagnostics in the sense that it is applicable to caustic-crossing events with small finite-source effect.

• Carbon letters
• /
• 제10권3호
• /
• pp.213-216
• /
• 2009

The electrochemical deposition of Pt nanoparticles on carbon nanotubes (CNTs) supports and their catalytic activities for methanol electro-oxidation were investigated. Pt catalysts of 4~12 nm average crystalline size were grown on supports by potential cycling methods. Electro-plating of 12 min time by potential cycling method was sufficient to obtain small crystalline size 4.5 nm particles, showing a good electrochemical activity. The catalysts' loading contents were enhanced by increasing the deposition time. The crystalline sizes and morphology of the Pt/support catalysts were evaluated using X-ray Diffraction (XRD) and Transmission Electron Microscopy (TEM). The electrochemical behaviors of the Pt/support catalysts were investigated according to their characteristic current-potential curves in a methanol solution. In the result, the electrochemical activity increased with increased plating time, reaching the maximum at 12 min, and then decreased. The enhanced electroactivity for catalysts was correlated to the crystalline size and dispersion state of the catalysts.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.65-65
• /
• 2008

본 논문의 목표는 유기태양전지의 재료적 특성중 반사율을 측정하여 가장 투명한 oranic solar cell을 제조하기 위한 기초자료를 도출하였다. 먼저 유기태양전지 재료중 일부인 PEDOT,PSS,MEH-PPV,P3HT를 수십 $\AA$ ~ 수백 $\AA$ 두께로 glass 기판위에 spin코팅하여 UV-VIS를 통해 파장열 반사 특성을 분석하였다. 또한, 동일한 시료를 사용하여 FESEM을 통한 표면 Morphology를 확인하였다. 최종적으로 가장 transparent 시료를 이용하여 oranic solar cell을 제작하여 efficiency와 reflectance characteristic를 측정하였다.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1997년도 제26회 추계학술대회
• /
• pp.135-144
• /
• 1997

This wear debris can be harvested from the lubricants of operating machinery and its morphology is directly related to the damage to the interacting surfaces from which the particles originated. The morphologies of the wear particles are therefore directly indica- rive of wear processes occuring in machinery and their severity. The neural network was applied to identify wear debris generated from the lubricated moving system. The four parameter(50% volumetric diameter, aspect, roundness and reflectivity) of wear debris are used as inputs to the network and learned the friction condition of five values(material 3, applied load 1, sliding distance 1). It is shown that identification results depend on the ranges of these shape parameter learned. The three kinds of the wear debris had a different pattern characteristic and recognized the friction condition and materials very well by neural network. We dicuss how the network determines difference in wear debris feature, and this approach can be applied to condition diagnosis of the lubricated moving system.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1997년도 춘계학술대회논문집
• /
• pp.98-105
• /
• 1997

The behaviour of alloys in the semi-solid state strongly depends on the imposed stress state and on the morphology of the phase which can very from dendritic to globular. The estimation of behaviour characteristic in the compression simulation with seim-solid materials are calculated by finite element method with proposed algorithm. The proposed theoretical model and a various boundary conditions for compression process is investigated with the coupling calculation between the liquid phase flow and the solid phase deformation. The simulation process considering soldification phenomena is performed to the isothermal conditions of two dimensional problems. To analysis of compression process by using semi-solid materials, a new stress-strain relationship is described, and compression analysis is performed by viscoelastic model for the solid phase and the Darcy's law for the liquid flow. The calculated results for compression force and ram displacement will be compared to experimental data.

• 한국전기전자재료학회논문지
• /
• 제29권4호
• /
• pp.241-246
• /
• 2016

ZnO thin films have wide application areas due to its versatile properties as transparent conductors, wide-bandgap n-type semiconductors, gas sensor materials, and etc. We have performed a systematic investigation on ultraviolet-assisted CVD (chemical vapor deposition) method. Ultraviolet irradiation during the deposition of ZnO causes chemical reduction on the growing surface; which results in the reduction of the deposition rate, increase in the surface roughness, and decrease of the electrical resistivity. These effects produce larger characteristic variation with various deposition conditions in terms of surface morphology and optical/electrical properties compared to normal CVD deposited ZnO thin films. This versatile controllability of ultraviolet-assisted CVD can provide a larger processing options in the fabrication of nano-structured materials and flexible device applications.

• Mycobiology
• /
• 제40권3호
• /
• pp.147-150
• /
• 2012

This paper provides a description of Opegrapha herbarum, Opegrapha viridis and Phaeographis subdividens, all newly identified in the Republic of Korea. The characteristic features of O. herbarum include Varia-type asci, Subelevata-type ascospores, a lack of secondary metabolites and a saxicolous habitat. O. viridis possesses Calcarea-type asci, Vulgata-type ascospores and no chemicals in the thallus. P. subdividens is recognizable by its curved to sinuous lirellae, divergent labia, a brown and uniformly thick proper exciple which is open at its base, 3~4-septate ascospores, and lack of secondary metabolites. All three taxa are now reported to exist on Bogil Island in the Republic of Korea.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1994년도 추계학술대회 논문집
• /
• pp.198-201
• /
• 1994

Stability improvement of fragile LB films was attempted by polyion complexation of monolayers at the air-water interface and crosslinking of the resulting LB films. The spreading polymers were synthesized by radical copolymerization of monoalkyl itaconate with oligoethyleneglycol methyl vinylether, and poly(allylamine) was employed as the subphase polymer. Formation and characteristic of the monolayers were comfirmed by surface pressure-area($\pi$-A) isotherms. The two different polymers formed polyion-complexed monolayer through the formation of carboxylate/ammonium salt at the air-water interface. Y-type deposition occurred on solid substrates, and the transfer ratio was over 0.7. Pores (diameter, 0.1$\mu\textrm{m}$) of a membrane filter could be covered by polyion-complexed 6 layers. Interactions of the polymers with metal ions were investigated of the air-water interface and in the LB films. The structure change and macroscope morphology of the LB films were confirmed by FT-lR and SEM, respective1y.

• 한국주조공학회지
• /
• 제34권4호
• /
• pp.136-142
• /
• 2014

Numerical solution of thermal stress by CAE analysis could be an effective method in product development stage of castings to predict and treat the problem of solidification cracking of castings. Quantitative stress-strain data are necessary, in this case. Tension type apparatus of a solidification crack test which can measure stress-strain relationship quantitatively was developed and the test procedure was established by this research. Solidification crack strength obtained from the following test procedure could be utilized to evaluate it in terms of effect factors on thermo-plastic characteristic of solidifying alloy such as grain size of solid, grain morphology, distribution of solid grain, etc. Proposed test procedure is as follow: Prediction of temperature at the failure site of solidification cracked specimen by computer simulation of solidification, Calculation of solid fraction of the failure site from thermodynamic solution of solidification under Scheil condition.

• 한국생산제조학회지
• /
• 제7권5호
• /
• pp.92-97
• /
• 1998

The morpholgies of the wear particles are directly indicative of wear processes occuring in machinery and their severity. The neural network was applied to identify wear debris generated from the machine driving system. The four parameters(50% volumetric diameter, aspect, roundness and reflectivity) of wear debris are used as inputs to the network and learned the friction condition of five values(material 3, applied load 1, sliding distance 1). It is shown that identification results depend on the ranges of these shape parameters learned. The three kinds of the wear debris had a different patter characteristic and recognized the friction condition and materials very well by artificial neural network. We discussed how the network determines differencee in wear debris feature, and this approach can be applied to foreseeability and decisio for moving condition of the Machine driving system.