• 폴리머
• /
• 제24권1호
• /
• pp.29-37
• /
• 2000

메탄올/물의 혼합용매에 아닐린 단량체, 산화제, 도판트 그리고 PEO를 넣어 일정시간 교반한 후, 용액을 캐스팅하여 용매를 증발시켜 전도성 고분자인 폴리아닐린 (PANi)과 열가소성 매트릭스 고분자인 폴리에틸렌옥사이드(PEO)가 혼합된 블렌드를 얻었다. 블렌드 내의 중합된 PANi의 양이 많아질수록 전기전도도가 증가함을 알 수 있었고, PANi의 함유량이 11 wt%만 되어도 전기전도도가 약 0.15 S/cm값을 나타내었다. 교반조 내의 체류시간에 따라 PANi/PEO 블렌드의 형태학이 변함을 관찰하였으며, 이러한 형태학이 전기전도도에 영향을 미침을 알았다. 또한 도판트의 분자크기가 커질수록 제조된 블렌드의 전기전도도가 증가함을 관찰하였다. 매트릭스 고분자로 사용된 PEO 분자량을 변화시키며 블렌드를 제조하였을때, PEO의 분자량이 클수록 제조된 PANi/PEO 블렌드의 전기전도도가 증가함을 관찰하였다.

• 멤브레인
• /
• 제29권6호
• /
• pp.308-313
• /
• 2019

본 연구에서는 구리 이온(Cu²⁺ ion) 제거를 위한 산화철(Fe₃O₄)/다공성 탄소 복합체를 합성하였으며, 이를 바탕으로 구리 이온 제거에 대한 특성 평가를 실시하였다. SEM, XRD 분석을 진행하여 수열합성(hydrothermal) 반응을 이용한 산화철/다공성 탄소 복합체의 형태와 구조를 확인하였다. BET 분석을 통해 비표면적과 기공 크기를 확인하였으며, UV-vis 장비를 통해 성능 평가를 실시하여 자성이 있는 Fe₃O₄와 다공성 탄소와의 시너지효과를 통해 액체 상태에서 존재하는 구리 이온을 제거할 수 있는 가능성을 제시하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
• /
• pp.168-171
• /
• 2003

Bismuth layered structure, Cerium-substituted $Bi_4Ti_3O_{12}$ ($(Bi,Ce)_4Ti_3O_{12}$) thin films were prepared on the $Pt/TiO_2/SiO_2/Si$ substrates by the pulsed laser deposition method. We investigated the Ce-subsitituted effect on the grain orientation and ferroelectric properties. $Ce^{3+}$ ion substitution for $Bi^{3+}$ ion in perovskite layers of BTO decreased the deeree of c-axis orientation and increased the remanent polariation (2Pr). The structure and morphology of the films were characterized using X-ray diffraction and atomic force microscopy. The $(Bi,Ce)_4Ti_3O_{12}$ (BCT) thin films, which were annealed $700^{\circ}C\;and\;800^{\circ}C$ for 10min and 30min, showed a perovskite phase and dense microstructure. As the thickness of the BCT film was decresed that the ferroelectric properties of the BCT thin films were good.

• 한국표면공학회지
• /
• 제38권5호
• /
• pp.193-197
• /
• 2005

Highly c-axis oriented Zinc oxide (ZnO) films were successfully deposited at room temperature by oxygen ion-assisted pulsed filtered vacuum arc. The effect of oxygen gas ratio ($O_{2}/O_{2}+Ar$ on the preferred orientation, surface morphology and resistivity of the ZnO films were investigated. Highly crystalline ZnO films with (002) orientation were obtained at over $13\%$ of oxygen gas ratio. Increasing oxygen gas ratio up to $80\%$ was found to improve crystallinity of the films. From hall measurements, it was found that the film has n-type characteristic and carrier concentration and its mobility were closely related with oxygen gas ratio. Minimal resistivity of $3.6{\times}10^{-3}{\Omega}{\cdot}cm$ was obtained in the range of $20\%$ to $40\%$ of oxygen gas ratio.

• 한국분말재료학회지
• /
• 제12권3호
• /
• pp.186-191
• /
• 2005

A formation of aluminum hydroxide by hydrolysis of nano and micro aluminum powder has been studied. The nano aluminum powder of 80 to 100 nm in diameter was fabricated by a pulsed wire evaporation (PWE) method. The micro powder was commercial product with more than $10\;{\mu}m$ in diameter. The hydroxide type and morphology depending on size of the aluminum powder were examined by several analyses such as XRD, TEM, and BET. The hydrolysis procedure of micro aluminum powder was different from that of nano aluminum powder. The nano aluminum powder after immersing in the water was transformed rapidly to a nano fibrous boehmite, accompanying with a remarkable temperature increase, and then further transformed slowly to a stable bayerite. However, the micro powder was changed to the stable bayerite slowly and directly. The formation of fibrous aluminum hydroxide from nano aluminum powder might be due to the fine cracks which were formed by hydrogen gas pressure on the surface hydroxide layer during hydrolysis. The nano powder with large specific surface area and small size reacted more actively and faster than the micro powder, and transformed to meta-stable hydroxide in relatively short reaction time. Therefore, the formation of fibrous boehmite is special characteristic of hydrolysis of nano aluminum powder.

• 자원환경지질
• /
• 제29권1호
• /
• pp.87-103
• /
• 1996

The purposes of this research are to investigate the pollution level of heavy metals due to the urbanization and industrialization in the satellite cities of Seoul, and to assess the chemical species and the sources of heavy metals in highly contaminated soils and dusts. Soil and dust samples were collected from the Uijeongbu and the Koyang cities, which are northern and the northwestern satellite cities of Seoul metropolitan city, respectively. Relatively high pH values($6.3{\sim}9.9$) were found in roadside soils compared with agricultural and forest soils. Difference in pH values of soils was not identified between before and after rainy seasons. In spite of no specific pollution sources in the above cities, the contents of Cu, Pb, and Zn in soils and dusts were much higher than the world average contents. The metal levels in dusts were higher than those in soils, but the metal concentration in dusts was significantly decreased after rainy season. Pollution index was high(> 1.0) in the areas of heavy traffic, industrial complex, and city centres. There is an appreciable proportion of total Zn in exchangeable/water-acid soluble fraction. Copper is predominantly associated with reducible and oxidizable phases, whereas Pb is largely in reducible association. It is concluded that the mobility and bioavailability of metals are high in the order of Zn >> Cu > Pb, on the basis of characteristic particle morphology and chemical composition, Pb-containing particles are originated probably from the automobile exhaust, particularly in heavy traffic areas. The metallic forms and iron-oxide associated forms of Cr, Ni, Cu, Zn, and Pb can be assessed as industrial origin.

• Tribology and Lubricants
• /
• 제30권2호
• /
• pp.108-115
• /
• 2014

The friction behaviors of bulk amorphous thermal spray coating (BAC) and second phase-reinforced composite coatings using a high velocity oxy-fuel spraying process were investigated using a ball-on-disk test rig that slides against a ceramic ball in an atmospheric environment. The surface temperatures were measured using an infrared thermometer installed 50 mm from the contact surface. The crystallinities of the coating layers were determined using X-ray diffraction. The morphologies of the coating layers and worn surfaces were observed using a scanning electron microscope and energy-dispersive spectroscopy. The results show that the friction behavior of the monolithic amorphous coating was sensitive to the testing conditions. Under lower than normal loads, a low and stable friction coefficient of about 0.1 was observed, whereas under a higher relative load, a high and unstable friction coefficient of greater than 0.3 was obtained with an instant temperature increase. For the composite coatings, a sudden increase in friction coefficient did not occur, i.e., the transition region did not exist and during the friction test, a gradual increase occurred only after a significant delay. The BAC morphology observations indicate that viscous plastic flow was generated with low loads, but severe surface damage (i.e., tearing) occurred at high loads. For composite coatings, a relatively smooth surface was observed on the worn surface for all applied loads.

• 생태와환경
• /
• 제33권3호통권91호
• /
• pp.206-212
• /
• 2000

남조류 분리균주들은 주어진 배양조건에 따라서 특징적인 세포모양이 결핍되거나 형태가 변형되기 쉽기 때문에, 형태학적으로 종을 정확하게 구분하기 어렵다. 형태학적 지표대신에 단일 혹은 조합된 반복염기를 프라이머로 이용한 repetitive oligonucleotides-primed PCR (ROP-PCR)을 수행하여 담수계 오염을 일으키는 독성 남조류 Anabaena와 Oscillatoria 속의 구성원들의 DNA 밴드양상을 구별하였다. 그람음성 세균에 빈번하게 분포한 것으로 알려진 ERIC및 REP 반복염기, 남조류의 게놈으로부터 파생된 STRRIA와 LTRR 반복염기, 그리고 진핵생물의 반복염기를 이용하여 수행한 ROP-PCR은 남조류 분리균주들의 특이적이고 반복적인 DNA 지문 및 뚜렷한 유전형을 동정하게 하였다. 분리균주의 그룹분석은 ROP-PCR에 이용된 프라이머에 따라서 유의성있는 차이를 나타내었다.

• 한국잠사곤충학회지
• /
• 제36권1호
• /
• pp.30-36
• /
• 1994

집누에와 멧누에의 종간교잡에 의한 란각구조 및 chorion 단백질의 변이와 양 종간의 유연관계를 검토했다. 1. 교잡종 란의 측면부의 란각표면구조는 양 종이 모두 집누에와 유사한 그물상구조를 나타내지만 각각의 교잡 모체쪽의 구조와 유사했다. 2. 교잡종에서의 란각단면구조는 멧누에의 구조와 유사했으며 최외층인 덮개층은 측면부에서 주변부로 갈수록 더욱 뚜렷이 관찰되었다. 3. Chorion 단백질의 성분분석 결과 등전점이 4.0-6.5 분자량 10-50 kd 사이에 대부분의 성분이 검출되었으며 교잡종이 chorion 단백질성분은 영동 pattern, 성분수, 등전점 및 분자량 등에 있어서 교잡모체의 chorion 단백질과 유사했다.

• 한국재료학회지
• /
• 제16권4호
• /
• pp.257-263
• /
• 2006

We have investigated the effect of silver added to Cu films on the microstructure evolution, resistivity, surface morphology, stress relaxation temperature, and adhesion properties of Cu(Ag) alloy thin films deposited on Mo glue layer upon annealing. In addition, pure Cu films deposited on Mo has been annealed and compared. The results show that the silver in Cu(Ag) thin films control the grain growth through the coarsening of its precipitates upon annealing at $300^{\circ}C{\sim}600^{\circ}C$ and the grain growth of Cu reveals the activation energy of 0.22 eV, approximately one third of activation energy for diffusion of Ag dopant along the grain boundaries in Cu matrix (0.75 eV). This indicates that the grain growth can be controlled by Ag diffusion along the grain boundaries. In addition, the grain growth can be a major contributor to the decreased resistivity of Cu(Ag) alloy thin films at the temperature of $300^{\circ}C{\sim}500^{\circ}C$, and decreases the resistivity of Cu(Ag) thin films to $1.96{\mu}{\Omega}-cm$ after annealing at $600^{\circ}C$. Furthermore, the addition of Ag increases the stress relaxation temperature of Cu(Ag) thin films, and thus leading to the enhanced resistance to the void formation, which starts at $300^{\circ}C$ in the pure Cu thin films. Moreover, Cu(Ag) thin films shows the increased adhesion properties, possibly resulting from the Ag segregating to the interface. Consequently, the Cu(Ag) thin films can be used as a metallization of advanced TFT-LCDs.