• Korean Journal of Plant Tissue Culture
• /
• v.27 no.2
• /
• pp.109-115
• /
• 2000

Effects of the heavy-ion ($^{14}$ N or $^{20}$ Ne) beam irradiation on the response of anthers, growth of calli, germination of seeds, and the early growth after the germination of tobacco (Nicotiana tabacum L. cv. BY-4) were investigated. Anthers precultured for 10 days before the irradiation became brown without callus or shoot induction over 20 Gy of $^{14}$ N and $^{20}$ Ne ion beam irradiation. Relative growth rate of the cultured calli was reduced by the irradiation and became brown significantly 2 weeks after the $^{14}$ N and $^{20}$ Ne ion beam irradiation over 50 Gy. The increased intensity of the heavy-ion ($^{14}$ N, $^{20}$ Ne) beam irradiation resulted in the delay of seed germination and the inhibition of the early growth both in water-treated and non-treated seeds before the irradiation. In addition, the heavy-ion beam irradiation to the imbibed seeds inhibited seed germination more than that to the non-imbibed seeds. The screening approach of non-imbibed seeds with heavy-ion beam irradiation using in vitro culture system was more useful than the filter-paper germination method in investigating the characteristics of heavy-ion beam-irradiated seed population and the screening of morphological variants at the early stage of the plant growth.

• Korean Journal of Microbiology
• /
• v.17 no.4
• /
• pp.165-178
• /
• 1979

Phages of Lactobaciilus casei (PLC) isolated from plant drainage were classified and characterized. The results are as follows : 1. On the basis of host range pattern, phages could be divided into 2 groups (PLC-B and PLC-C). PLC-B group phages could be further divided into 5 sub-groups $(B_1, \;B_2, \;B_3, \;B_4, \;and\;B_5)$. Although PLC-C group phages had the same host range, they could be also divided into 2 sub-groups $(C_1\;and\;C_2)$ by morphlogical type. 2. It was $B_3$ group phages that represented a major proportion (44.4%) of phages tested. However, $B_1$ group phages were shown to have the widest host range. 3. Electron micrographs revealed that the phages fell into three different morphological types. $(B_1, \;B_2, \;and\;B_3)$ group phages hd a hexagonal head (52nm in diameter) and a sheathless noncontractile (245 nm in length). $B_4\;and\;C_2$ group phages had a hexagonal head (56 nm) and a short flexible tail (169nm) having no sheath. $B_5\;and\;C_1$ group phages were shown to have a hexagonal head (81 nm) and a contractile tail (140 nm) having a sheath, a base plate and tail fibers. 4. The inactivation of the phages by antisera indicated that serological relationships correlated completely with morphological types. 5. $B_1, \;C_1\;and\;C_2$ group phages produced a large (1, 2 mm in diameter) plaque with a clear ring. The morphology of plaques of $B_3\;and\;B_5$ group phages was the same as those produced by the above, but the average plaque sizes for $B_3\;and\;B_5$ were 0.8 mm abd 0.5 mm, respectively. $B_2\;and\;B_4$ group phages produced a small (0.5 mm) turbid plaque with an irregular edge. 6. The latent period and the average burst size of $B_1\;and\;B_3$ group phages were 90 min and 100, respectively. These phages reuqired calcium ions for their miltiplication. 7. $B_3$ group phages could not be absrobed to R-variant $KC_1$. 8. The order of resistance of phages to heat was $B_2\;>\;B_1, B_4\;and\;B_5\;>\;B_3\;and\;C_2, \;B_5$ group phages were more stable than $B_3$ in various pH values. $C_2$ group phages were more sensitive to UV irradiation than $B_1\;and\;B_3$ group phages. 9. Strains YIT9018 and IAM 1043 were induced by mitomycin C treatment. Phage particles detected in the lysates had a hexagonal head (38 and 49 nm, respectively), but no tail. Any sensitive indicator strain could not be isolated in spite of repaeated trials.

• Archives of Plastic Surgery
• /
• v.38 no.6
• /
• pp.903-906
• /
• 2011

Purpose: Accessory tragus is a fairly common congenital malformation and usually located at pretragal area. Surgical removal is a common treatment of accessory tragus irrespective of location and morphology. Most accessory tragi do not have depression site around them, but some do. So in those cases, simple surgical excision was not enough to promote the aesthetic facial appearance. For depression site remodeling, the excess amount of skin and cartilage need to be remained partially instead of total excision. This method can achieve the symmetric contour of pretragal area. The authors excised the epidermis and cartilaginous tissue totally and remained the dermis for reconstruction of the depression site around accessory tragus. The depression site is filled with dermal turnover flap. The purpose of this report is to present new idea to promote cosmetic result in treatment of accessory tragus containing the depression site. Methods: Two patients had a pair of accessory tragi at pretragal area. One was a common featured accessory tragus, but the other was different. Depression site was found around accessory tragus. After epidermis and cartilaginous tissue were removed from it, dermis component was used as turnover flap for reconstruction of depression site. Results: After accessory tragus was removed and depression site was reconstructed, facial contour and cosmetic result was achieved. Complication such as flap necrosis and wound dehiscence was not observed. Conclusion: The accessory tragus has variant morphology and degree of invasive depth. And some has a depression site around them. In those cases, simple surgical removal results in morphological distorsion and do not promote facial symmetry. The authors suggest dermal turnover flap as reconstruction method of the depression site. This method improves both surgical outcome and cosmetic result.

• Toxicological Research
• /
• v.33 no.2
• /
• pp.141-147
• /
• 2017

Peripheral ameloblastic odontoma is a rare variant of odontogenic tumor occurring in the extraosseous region. The present report describes a spontaneous tumor in male Sprague-Dawley (SD) rats. The clinically confirmed nodule in the right mandibular region was first observed when the rat was 42 weeks and remained until the terminal sacrifice date when the animal was 48 weeks of age. At necropsy, a well demarcated nodule, approximately $2.5{\times}2.0{\times}2.0cm$, protruded from the ventral area of the right mandible. The nodule was not attached to mandibular bone and was not continuous with the normal teeth. Histopathologically, the tumor was characterized by the simultaneous occurrence of an ameloblastomatous component and composite odontoma-like elements within the same tumor. The epithelial portion formed islands or cords resembling the follicle or plexiform pattern typical of ameloblastoma and was surrounded by mesenchymal tissue. Formation of eosinophilic and basophilic hard tissue matrix (dentin and enamel) resembling odontoma was observed in the center of the tumor. Mitotic figures were rare, and areas of cystic degeneration were present. Immunohistochemically, the epithelial component was positive for cytokeratin AE1/AE3 (CK AE1/AE3), and the mesenchymal component and odontoblast-like cells were positive for vimentin, in the same manner as in normal teeth. On the basis of these findings, the tumor was diagnosed as a peripheral ameloblastic odontoma in an extraosseous mandibular region in a SD rat. In the present study, we report the uncommon spontaneous peripheral ameloblastic odontoma in the SD rat. We also discuss here the morphological characteristics, origin, histochemical, and immunohistochemical features for the diagnosis of this tumor.

• Plant Biotechnology Reports
• /
• v.4 no.1
• /
• pp.15-21
• /
• 2010

The over-expression of Arabidopsis CAX1 and CAX2 causes transgenic tomato plants to reveal severe $Ca^{2+}$ deficiency-like symptoms such as tip-burn and/or blossom end rot, despite there being sufficient $Ca^{2+}$ in each plant part. To correct the symptoms and to moderately enhance the calcium level, a worldwide vegetable tomato was genetically engineered using a modified Arabidopsis cation/$H^+$ antiporter sCAX2A, a mutant form of Arabidopsis CAX2. Compared with the wild-type, the sCAX2A-expressing tomato plants demonstrated elevated $Ca^{2+}$ levels in the fruits with almost no changes in the levels of $Mn^{2+}$, $Cu^{2+}$, and $Fe^{2+}$. Moreover, expression of sCAX2A in tomato plants did not show any significant alterations in their morphological phenotypes. Unlike 35S::sCAX1 construct, sCAX2A antiporter gene driven by 35S promoter can be a valuable tool for enriching $Ca^{2+}$ contents in the tomato fruit without additional accumulation of the undesirable cations.

• Carbon letters
• /
• v.15 no.1
• /
• pp.25-31
• /
• 2014

A microstructure analysis is carried out to optimize the process parameters of a randomly oriented discrete length hybrid carbon fiber reinforced carbon matrix composite. The composite is fabricated by moulding of a slurry into a preform, followed by hot-pressing and carbonization. Heating rates of 0.1, 0.2, 0.3, 0.5, 1, and $3.3^{\circ}C/min$ and pressures of 5, 10, 15, and 20 MPa are applied during hot-pressing. Matrix precursor to reinforcement weight ratios of 70:30, 50:50, and 30:70 are also considered. A microstructure analysis of the carbon/carbon compacts is performed for each variant. Higher heating rates give bloated compacts whereas low heating rates give bloating-free, fine microstructure compacts. The compacts fabricated at higher pressure have displayed side oozing of molten pitch and discrete length carbon fibers. The microstructure of the compacts fabricated at low pressure shows a lack of densification. The compacts with low matrix precursor to reinforcement weight ratios have insufficient bonding agent to bind the reinforcement whereas the higher matrix precursor to reinforcement weight ratio results in a plaster-like structure. Based on the microstructure analysis, a heating rate of $0.2^{\circ}C/min$, pressure of 15 MPa, and a matrix precursor to reinforcement ratio of 50:50 are found to be optimum w.r.t attaining bloating-free densification and processing time.

• Korean Journal of Radiology
• /
• v.24 no.12
• /
• pp.1232-1240
• /
• 2023

Objective: To investigate the imaging characteristics of large duct pancreatic ductal adenocarcinoma (LD-PDAC) on computed tomography (CT) and magnetic resonance imaging (MRI). Materials and Methods: Thirty-five patients with LD-PDAC (63.2 ± 9.7 years) were retrospectively evaluated. Tumor morphology on CT and MRI (predominantly solid mass vs. solid mass with prominent cysts vs. predominantly cystic mass) was evaluated. Additionally, the visibility, quantity, shape (oval vs. branching vs. irregular), and MRI signal intensity of neoplastic cysts within the LD-PDAC were investigated. The radiological diagnoses rendered for LD-PDAC in radiology reports were reviewed. Results: LD-PDAC was more commonly observed as a solid mass with prominent cysts (45.7% [16/35] on CT and 37.1% [13/35] on MRI) or a predominantly cystic mass (20.0% [7/35] on CT and 40.0% [14/35] on MRI) and less commonly as a predominantly solid mass on CT (34.3% [12/35]) and MRI (22.9% [8/35]). The tumor morphology on imaging was significantly associated with the size of the cancer gland on histopathological examination (P = 0.020 [CT] and 0.013 [MRI]). Neoplastic cysts were visible in 88.6% (31/35) and 91.4% (32/35) of the LD-PDAC cases on CT and MRI, respectively. The cysts appeared as branching (51.6% [16/35] on CT and 59.4% [19/35] on MRI) or oval shapes (45.2% [14/35] on CT and 31.2% [10/35] on MRI) with fluid-like MRI signal intensity. In the radiology reports, 10 LD-PDAC cases (28.6%) were misinterpreted as diseases other than typical PDAC, particularly intraductal papillary mucinous neoplasms. Conclusion: LD-PDAC frequently appears as a solid mass with prominent cysts or as a predominantly cystic mass on CT and MRI. Radiologists should be familiar with the imaging features of LD-PDAC to avoid misdiagnosis.