• 전자공학회논문지B
• /
• 제33B권4호
• /
• pp.141-147
• /
• 1996

In this paper an improved morphological algorithm for directional defect detection is proposed, where the defect is parallel to the texture image. The algorithm is based on obtaining the background image while removing the defect by comparing every directional morphological result with max or min except that of defect. The defect can of defect and the background image. For a computer simulation, it is shown that the proposed method has better performance than the conventional algorithm.

• 한국멀티미디어학회논문지
• /
• 제23권5호
• /
• pp.633-640
• /
• 2020

Defect region segmentation of TFT-LCD images is performed by combining defect pixels detected by a defect detection method into defect region, or by using morphological operations to segment defect region. Therefore, the result of segmentation of the defect region is highly dependent on the defect detection result. In this paper, we propose a method which segments defect regions sequentially according to the possibility of being included in defect regions in TFT-LCD images. The proposed method repeats the process of detecting a seed using the median value and the median absolute deviation of the image, and segments the defect region using the seeded region growing method. We confirmed the superiority of the proposed method to segment defect regions using pseudo-images and real TFT-LCD images.

• 한국산업정보학회논문지
• /
• 제20권2호
• /
• pp.73-83
• /
• 2015

본 논문에서는 순차적 결함 검출 방법을 이용하여 TFT-LCD의 결함 영역(Blob)을 효과적으로 검출하는 알고리즘을 제안한다. 먼저 결함과 배경 간의 휘도 차를 이용하여 영상의 각 화소들에 대한 결함 확률을 판단하고, 결함 확률에 따른 순차적 결함 검출 방법을 이용하여 결함 후보 화소를 검출한다. 여기서 결함 확률이란 결함 후보 화소가 검출된 단계에 따라 결함 영역에 포함될 가능성을 나타내다. 형태학 연산을 적용함으로써 검출된 후보 화소들을 후보 결함 영역으로 형성하고, 각 후보 결함 영역에 대한 결함 가능성을 계산하여 결함 영역을 검출한다. 모의 TFT-LCD 영상을 생성하여 제안 방법의 타당성을 검증하고, 실제 TFT-LCD 영상에 적용함으로서 제안 알고리즘의 우수한 결함 검출 성능을 확인하였다.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제26권2호
• /
• pp.197-203
• /
• 2000

Maxillary defect may be induced by trauma, inflammation, cyst, tumor and surgical procedure. In case of limited wall defect, free bone graft has been preferred. But it has some problems such as postoperative bone resorption and soft tissue inclusion to recipient site. And we can not use free bone in the case who has inflammation in the donor site. So we used the micro-titanium mesh as reconstructive material for the maxillary wall defect. We had operated 8 patients who were diagnosed as maxillary partial defects from June 1997 to September 1998 in the Chin-Hae military hospital. They were 1 case of antral wall defect, 1 case of palatal wall defect, 5 cases of infra-orbital wall defects and 1 case of oroantral fistula case. As a result, the micro-titanium mesh has shown the morphological stability and biocompatibility and it could be used in case who has infection. And mesh structure could prevent soft tissue ingrowth to bony defect area. Thus it can be used to the case of maxillary partial defect successfully.

• Journal of Chest Surgery
• /
• 제25권12호
• /
• pp.1471-1475
• /
• 1992

Within the group of congenital cardiac anomalies manifesting atrioventricular discordance, there exists a subset of hearts characterized by the additional presence of double outlet of the morphological right ventricle. Most of these hearts have associated pulmonary stenosis and abnormal direction of the cardiac apex, and all have a ventricular septal defect. Recently, a 10-year old boy underwent successful surgical correction of double outlet right ventricle with atrioventricular discordance. Diagnostic confirmation was made by 2-D echocardiography, cardiac catheterization and cineangiocardiography. The operation consisted of patch closure of ventricular septal defect so as to leave both great arteries draining the systemic[morphologically right] ventricle, and insertion of an extracardiac valved conduit between the morphological left ventricle and the distal end of the proximally oversewn pulmonary artery. Postoperative course was uneventful.

• 반도체디스플레이기술학회지
• /
• 제9권3호
• /
• pp.59-63
• /
• 2010

This paper proposes computer visual inspection algorithms for various LCD defects which are found in a manufacturing process. Modular vision processing steps are required in order to detect different types of LCD defects. Those key modules include RGB filtering for pixel defects, gray-scale morphological processing and Hough transform for line defects, and adaptive threshold for spot defects. The proposed algorithms can give users detailed information on the type of defects in the LCD panel, the size of defect, and its location. The machine vision inspection system is implemented using C language in an embedded Linux system for a high-speed real-time image processing. Experiment results show that the proposed algorithms are quite successful.

• 제어로봇시스템학회논문지
• /
• 제2권4호
• /
• pp.337-343
• /
• 1996

In this paper, we investigate the defect detection by making use of pre-made reference image data and classify the defects by using the artificial neural network. The approach is composed of three main parts. The first step consists of a proper generation of two reference image data by using a low level morphological technique. The second step proceeds by performing three times logical bit operations between two ready-made reference images and just captured image to be tested. This results in defects image only. In the third step, by extracting four features from each detected defect, followed by assigning them into the input nodes of an already trained artificial neural network we can obtain a defect class corresponding to the features. All of the image data are formed in a bit level for the reduction of data size as well as time saving. Experimental results show that proposed algorithms are found to be effective for flexible defect detection, robust classification, and high speed process by adopting a simple logic operation.

• Journal of Chest Surgery
• /
• 제21권4호
• /
• pp.748-756
• /
• 1988

Transaortic closure of ventricular septal defect, suturing a patch on the morphological right ventricular side in patients with congenitally corrected transposition of great arteries might help to avoid postoperative complete heart block if the aorta is large and the subaortic conus is not well developed. In two patients[aged 6 and 16 years] with congenitally corrected transposition of great arteries, ventricular septal defect, and pulmonary stenosis, transaortic closure of ventricular septal defect was performed. No postoperative complete heart block resulted. One hospital death occurred because of sepsis who had underwent reoperation due to bleeding from the aortotomy site. Minimal aortic regurgitation developed in another patient.

• 전기전자학회논문지
• /
• 제18권2호
• /
• pp.234-239
• /
• 2014

This paper proposes a new automatic detection method to inspect mura defects on display film surface using morphological image processing and labeling. This automatic detection method for mura defects on display films comprises 3 phases of preprocessing with morphological image processing, Gabor filtering, and labeling. Since distorted results could be obtained with the presence of non-uniform illumination, preprocessing step reduces illumination components using morphological image processing. In Gabor filtering, mura images are created with binary coded mura components using Gabor filters. Subsequently, labeling is a final phase of finding the mura defect area using the difference between large mura defects and values in the periphery. To evaluate the accuracy of the proposed detection method, detection rate was assessed by applying the method in 200 display film samples. As a result, the detection rate was high at about 95.5%. Moreover, the study was able to acquire reliable results using the Semu index for luminance mura in image quality inspection.

• Asian-Australasian Journal of Animal Sciences
• /
• 제31권8호
• /
• pp.1160-1168
• /
• 2018

Objective: This study was conducted to compare morphological defects, viability, motility (MOT), fertility (F), and hatchability (H) in four Korean native chicken breeds (KNCBs), and to evaluate whether defective segments of spermatozoa are associated with MOT, F, and H. Methods: Four KNCBs, including Korean Ogye (KO), Hwangbong (HB), Hyunin Black (HH), and Hoengseong Yakdak (HY) were used. White Leghorn (WL) was used as a control. Nine cocks from each breed were randomly assigned into three groups. Semen was collected by abdominal massage method. Eosin-nigrosin staining method was used to identify live-dead spermatozoa. Different segments and specific morphological defects of spermatozoa were identified using 4', 6-diamidino-2-phenylidole and MitoTracker Red CMXRos. F and H rates were evaluated following artificial insemination (AI). Results: KO had the highest MOT rate compared to HY. Viable normal sperm rates of KO and HH were high and comparable with WL. HY spermatozoa had the highest viable abnormal sperm (VAS) or morphological defect rate followed by HB. Likewise, HB spermatozoa had the highest dead sperm (dead) rate compared to KO, HY, and WL. Bent, coiled, detached, broken, and knotted were common identified specific morphological defects for all breeds. Most morphological defects were at the head and tail in all breeds. VAS showed strong negative correlation with MOT (r = -0.697) and F (r = -0.609). Similarly, defective tail was negatively correlated with MOT (r = -0.587), F (r = -0.797), and H (r = -0.448). The F and H rates of KO and WL were comparable. Conclusion: These data indicate that most identified specific morphological defects are at the head and tail. VAS and defective tail were associated with poor motility, F, and H. KNCBs showed more morphological defects than WL. Finally, these results will facilitate successful AI and semen cryopreservation.