• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.4
• /
• pp.653-659
• /
• 2002

This paper describes a probabilistic fracture mechanics(PFM) analysis based on Monte Carlo(MC) simulation. In the analysis of CANDU pressure tube, the depth and aspect ratio of an initial semi-elliptical surface crack, a fracture toughness value and delayed hydride cracking(DHC) velocity are assumed to be probabilistic variables. As an example, some failure probabilities of piping and CANDU pressure tube are calculated using MC method with the stratified sampling MC technique, taking analysis conditions of normal operations. In the stratified MC simulation, a sampling space of probabilistic variables is divided into a number of small cells. For the verification of analysis results, a comparison study of the PFM analysis using other commercial code is carried out and a good agreement was observed between those results.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.3
• /
• pp.197-204
• /
• 2021

If a failure or an abnormal maneuver occurs during the flight test of a missile, the missile is deliberately self-destructed so as not to continue the flight. At this time, debris are produced and it is important to estimate the impact area in real-time whether it is out of the safety area. In this paper, we propose a method to estimate the debris dispersion area and falling time in real-time using a Fully-Connected Neural Network (FCNN). We applied the Unscented Transform (UT) to generate a large amount of training data. UT parameters were selected by comparing with Monte-Carlo (MC) simulation to secure reliability. Also, we analyzed the performance of the proposed method by comparing the estimation result of MC.

• 한국방재학회:학술대회논문집
• /
• 2008.02a
• /
• pp.683-686
• /
• 2008

Flood damage has been increased due to the abnormal climate and extreme rainfall. So, quantitative and qualitative hydrologic data should be improved in oder to enhance accuracy of hydrologic forecast. However, research regarding hydrologic data have not been thorough enough. Therefore, in this study, monte carlo simulation was applied to rainfall runoff model to improve the reliability of runoff analysis and risk analysis. Rainfall-Stage-Discharge curve was developed as a consequence of MCS and it is possible to get correct rating curve for high water level.

• Progress in Medical Physics
• /
• v.19 no.1
• /
• pp.21-34
• /
• 2008

The parallel Monte Carlo electron and photon transport (PMCEPT) code [Kum and Lee, J. Korean Phys. Soc. 47, 716 (2006)] for calculating electron and photon beam doses has been developed based on the three dimensional geometry defined by computed tomography (CT) images and implemented on the Beowulf PC cluster. Understanding the limitations of Monte Carlo codes is useful in order to avoid systematic errors in simulations and to suggest further improvement of the codes. We evaluated the PMCEPT code by comparing its normalized depth doses for electron and photon beams with those of MCNP5, EGS4, DPM, and GEANT4 codes, and with measurements. The PMCEPT results agreed well with others in homogeneous and heterogeneous media within an error of $1{\sim}3%$ of the dose maximum. The computing time benchmark has also been performed for two cases, showing that the PMCEPT code was approximately twenty times faster than the MCNP5 for 20-MeV electron beams irradiated on the water phantom. For the 18-MV photon beams irradiated on the water phantom, the PMCEPT was three times faster than the GEANT4. Thus, the results suggest that the PMCEPT code is indeed appropriate for both fast and accurate simulations.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.667-670
• /
• 2001

For major structural components periodic inspections and integrity assessments are needed for the safety. However, many flaws are undetectable because sampling inspection is carried out during in-service inspection. Probabilistic integrity assessment is applied to take into consideration of uncertainty and variance of input parameters arise due to material properties and undetectable cracks. This paper describes a Probabilistic Fracture Mechanics(PEM) analysis based on the Monte Carlo(MC) algorithms. Taking a number of sampling data of probabilistic variables such as fracture toughness value, crack depth and aspect ratio of an initial surface crack, a MC simulation of failure judgement of samples is performed. For the verification of this analysis, a comparison study of th PFM analysis using a commercial code, mathematical method is carried out and a good agreement was observed between those results.

• Journal of electromagnetic engineering and science
• /
• v.9 no.4
• /
• pp.202-210
• /
• 2009

In this paper, we have analyzed the effect of interference between ultra-wideband(UWB) and intelligent transport systems(ITS). The maximum possible UWB emission power and minimum possible distance between UWB devices and ITS are found. In order to analyze the interference, we employ the Monte-Carlo(MC) method. We consider six situations, which are indoor office line-of-sight(LOS), indoor office non-line-of-sight(NLOS), indoor residential LOS, indoor residential NLOS, outdoor rural LOS, and outdoor rural NLOS environments. From the simulation results, it is confirmed that coexistence between UWB and ITS devices can be realized in accordance with the emission mask of 19.3 dB for indoor application or 19.3 dB for an image system. And in the outdoors, coexistence between UWB and ITS devices can be realized if the emission mask is at least 1.6 dB for vehicles' radar systems.

• Proceedings of the KSME Conference
• /
• 2001.06a
• /
• pp.459-464
• /
• 2001

For major nuclear power plant components periodic inspections and integrity assessments are needed for the safety. But many flaws are undetectable due to sampling inspection. Probabilistic integrity assessment is applied to take into consideration of uncertainty and variance of input parameters arise due to material properties, applied load and undetectable flaws. This paper describes a Probabilistic Fracture Mechanics(PFM) analysis based on Monte Carlo(MC) algorithms. Taking important parameters as probabilistic variables such as fracture toughness, crack growth rate and flaw shape, failure probability of major nuclear power plant components is archived as a results of MC simulation. For the verification of these analysis, a comparison study of the PFM analysis using other commercial code, mathematical method is carried out and a good agreement was observed between those results.

• Proceeding of EDISON Challenge
• /
• 2015.03a
• /
• pp.53-60
• /
• 2015

본 연구에서는 random walk하는 입자와 암세포 확산을 비교하여 Fick's law를 따르는 확산 모형과 암세포 확산의 차이를 밝힌다. 암세포 확산은 암 전이 메커니즘을 이해하는데 매우 중요하다. 하지만 아직까지 암세포 확산은 정확하게 이해되지 않고 있다. 따라서 이번 연구에서는 가장 간단한 2차원 random walk와 암세포 확산을 비교하고, 동역학적인 차이를 규명해 암세포 확산을 이해하고자 한다. Random walk하는 입자는 EDISON 전산화학 전문센터의 프로그램 중 dynamic Monte Carlo(dynamic MC) 전산 모사 소프트웨어를 이용하여 2차원에서 움직이는 레나드-존스 입자의 운동을 통해 살펴보았다. 암세포 확산은 실제 암세포의 시간에 따른 위치 변화 정보 (세포의 궤적)를 직접 구하여 분석하였다. Dynamic MC 결과는 Fickian 확산 모형을 잘 따르는 것을 평균 제곱 거리와 밀도 함수를 통해 확인할 수 있었다. 암세포 확산의 경우 평균 제곱 거리는 시간에 대해서 선형적으로 비례하지만 밀도 함수는 가우시안 형태로 나오지 않으며 Fick's law를 따르는 확산 모형과 다른 확산 형태를 보인다. 이러한 확산 형태는 암세포의 동역학적인 다양성 때문에 나타나며 각각의 암세포가 다른 운동성을 가지는 것에 기인하는 것으로 보인다.

• Journal of the Semiconductor & Display Technology
• /
• v.6 no.3
• /
• pp.25-33
• /
• 2007

A computationally efficient and accurate Monte Carlo (MC) simulator of electron beam lithography process, which is named SCNU-EBL, has been developed for semiconductor nanometer pattern design and fabrication. The simulator is composed of a MC simulation model of electron trajectory into solid targets, an Gaussian-beam exposure simulation model, and a development simulation model of photoresist using a string model. Especially for the trajectories of incident electrons into the solid targets, the inner-shell electron scattering of an target atom and its discrete energy loss with an incident electron is efficiently modeled for multi-layer resists and heterogeneous multi-layer targets. The simulator was newly applied to the development profile simulation of ZEP520 positive photoresist for NGL(Next-Generation Lithography). The simulation of ZEP520 for electron-beam nanolithography gave a reasonable agreement with the SEM experiments of ZEP520 photoresist.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.1
• /
• pp.95-98
• /
• 2003

Enantioselectivity of the propranolol on β-cyclodextrin was simulated by molecular modeling. Monte Carlo (MC) docking and molecular dynamics (MD) simulations were applied to investigate the molecular mechanism of enantioselective difference of both enantiomeric complexes. An energetic analysis of MC docking simulations coupled to the MD simulations successfully explains the experimental elution order of propranolol enantiomers. Molecular dynamics simulations indicate that average energy difference between the enantiomeric complexes, frequently used as a measure of chiral recognition, depends on the length of the simulation time. We found that, only in case of much longer MD simulations, noticeable chiral separation was observed.