• Korean Journal of Applied Biomechanics
• /
• v.27 no.1
• /
• pp.35-43
• /
• 2017

Objective: The purpose of this study was to determine how gaze angle affects muscle activity and kinematic variables during treadmill walking and to offer scientific information for effective and safe treadmill training environment. Method: Ten male subjects who have no musculoskeletal disorder were recruited. Eight pairs of surface electrodes were attached to the right side of the body to monitor the upper trapezius (UT), rectus abdominis (RA), erector spinae (ES), rectus femoris (RF), bicep femoris (BF), tibialis anterior (TA), medialis gastrocnemius (MG), and lateral gastrocnemius (LG). Two digital camcorders were used to obtain 3-D kinematics of the lower extremity. Each subject walked on a treadmill with a TV monitor at three different heights (eye level; EL, 20% above eye level; AE, 20% below eye level; BE) at speed of 5.0 km/h. For each trial being analyzed, five critical instants and four phases were identified from the video recording. For each dependent variable, one-way ANOVA with repeated measures was used to determine whether there were significant differences among three different conditions (p<.05). When a significant difference was found, post hoc analyses were performed using the contrast procedure. Results: This study found that average and peak IEMG values for EL were generally smaller than the corresponding values for AE and BE but the differences were not statically significant. There were also no significant changes in kinematic variables among three different gaze angles. Conclusion: Based on the results of this study, gaze angle does not affect muscle activity and kinematic variables during treadmill walking. However, it is interesting to note that walking with BE may increase the muscle activity of the trapezius and the lower extremity. Moreover, it may hinder proper dorsiflexion during landing phase. Thus, it seems to reasonable to suggest that inappropriate gaze angle should be avoided in treadmill walking. It is obvious that increased walking speed may cause a significant changes in biomechanical parameters used in this study. It is recommended that future studies be conducted which are similar to the present investigation but using different walking speed.

• Journal of Korea Multimedia Society
• /
• v.23 no.1
• /
• pp.43-49
• /
• 2020

Along side with the rapid growth of local governments' advertising bills, there are few studies focused on the effectiveness of these ads. Especially one of the media being used by the local governments is the Korea Express Train (KTX), where they advertise in the train coaches' KTX video monitor. Unfortunately the ads in KTX are exposed without audio mostly. The current study, therefore, probed on the effectiveness of these ads. This study utilized transportation theory and content analysis methodology to give insight to its discourse. We established two analysis units (camera and subtitles), and then analyzed 107 local government ads. From the camera analysis, it is observed that local governments' festival and tour promotion ads more often employ dynamic angles such as drone shot and long shot. Also, from subtitles usage analysis, it is observed that many of the ads make use of large size titles and subtitles which could prevent viewers seeing visual shots. In the special case audio-less KTX ads, this study recommends emphasis on subtitles which will enhance the ad effectiveness of the ad messages.

• Journal of Applied Reliability
• /
• v.9 no.2
• /
• pp.131-148
• /
• 2009

An organic light emitting diode (OLED), also light emitting polymer (LEP) and organic electro luminescence (OEL), is any light emitting diode (LED) whose emissive electroluminescent layer is composed of a film of organic compounds. The layer usually contains a polymer substance that allows suitable organic compounds to be deposited. They are deposited in rows and columns onto a flat carrier by a simple "printing" process. The resulting matrix of pixels can emit light of different colors. Such systems can be used in television screens, computer displays, small, portable system screens such as cell phones and PDAs, advertising, information and indication. OLEDs can also be used in light sources for general space illumination, and large-area light-emitting elements. In this paper, we develop the general guide line of the accelerated life test for assuring B10 life of AMOLED(Active Matrix Organic Light Emitting Diode) and PMOLED(Passive Matrix Organic Light Emitting Diode) which are widely used for display monitor less than 115 mm.

• Child Health Nursing Research
• /
• v.26 no.1
• /
• pp.47-54
• /
• 2020

Purpose: The purpose of this study was to identify the smartphone use patterns of smartphone-dependent children. Methods: The study design was a cross-sectional descriptive study. The data were derived from the 2017 survey on smartphone over-dependence conducted by the Ministry of Science and ICT and the National Information Society Agency. The study sample was 595 elementary school students identified as being smartphone-dependent. The data were analyzed by frequency, percentage, mean, standard deviation, the independent t-test, the x² test, the Pearson correlation coefficient, and multiple regression analysis. Results: The frequency of smartphone use was the factor strongly associated with more severe smartphone dependence in participants. Games were the most commonly used application type among participants, regardless of their degree of dependence. More severe smartphone dependence was associated with greater use of applications such as learning and television/video. Conclusion: As smartphone dependence becomes more severe, children tend to use their smartphones more frequently and to use applications that involve solitary play for the purposes of entertainment and pleasure. The findings suggest that the parents should attentively monitor their children's smartphone use patterns and provide consistent discipline in a way that ensures appropriate smartphone use.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.2
• /
• pp.101-109
• /
• 1998

In this paper, we implemented holographic optical memory systm which can store and reconstruct many images using new input and angular multiplexing method. In the new input method, phase infomation of input image is inputed in the recording material instead of brightness information. To do so, we represented the images, which captured with CCD camera or displayed on the computer monitor, on the liquid crystal television(LCTV) which removed polarizer/analyzer. Therefore, we can generate uniform input beam intensity regardless of the total brightness of input image, and apply the scheduled recording method. Also we can increase the intensity of input beam so reduce the recording time of input image. And reconstructedimage is acquired by transforming phase information into brightness information of image with analyzer. The incident angle of reference beam is acquired by Fourier transform of the binary phase hologram(BPH) which designed with SA algorithm on the LCTV. The proposed optical memory system is stable because the incident angle of the reference beam is controlled easy and electronically. We demonstreated optical experiment which store and reconstruct various type images in BaTiO$_{3}$ using proposed holographic memory system.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.08a
• /
• pp.403-411
• /
• 1999

The steel plate for shadow mask is used in a Cathode-ray tube of TV monitor and is the strictest product in surface quality because hundreds thousand of holes are perforated in a plane of 25 ${\times}$25 inches. To mass-produce this product, a reversible cold rolling mill for silicon steel was used and the rolling technology and the activity for quality improvement are described in this work. Because the steel plate is a mild steel, which is very sensitive to strip-breakage even in a low tension, we reset the minimum tension values matching to the operating conditions. The roll mark due to the multi-segmented araangement of shape controlling roll was prevented by hardening the intermediate shape controlling roll and by changing the existing working-roll into a HSS (Hig Speed Steel) roll. The scratch caused by the speed difference between a idle roll and a strip was prevented by increasing the roll roughness. With these activities, the steel plate for shadow mask can be stable. The continuous improvement of quality is, however, required for the customer satisfaction both of domestic and overseas market.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1027-1028
• /
• 2008

Most of the urban transit operation company in Korea have a passive surveillance system to monitor the status of the passengers and facilities in the urban transit service area. The surveillance system is based on CCTV, closed circuit television, and several sensors, such as a fire sensor. However, this system has some limitations to prevent and cope with the emergency quickly. So the urban transit operation companies have plans to be change their surveillance system to be active. The active surveillance system has an intelligent function to detect the event predefined by managers automatically. To construct the active surveillance system, there are a standard concept design and a function analysis. In this paper, we propose the classification of the functions of the active surveillance system for urban transit. We divide the functions into five parts, ordinary monitoring, safety monitoring, environment monitoring, administration support, and record management. And we describe the systems related to the every functions to clarify the classified functions.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.552-555
• /
• 2002

In order to achieve higher performance and low cost a-Si TFT-LCD panel, new material architecture and its process integration for a-Si TFT array manufacturing method were developed. Material combination of low resistant dry-etchable metal and new pixel electrode under currently adopted 4 mask process made it possible to get more-simplified manufacturing method and better device performance for the a-Si TFT-LCD application. Proposed 4 mask process architecture with optimized wet etchants and dry etching process was applicable to various devices such as notebook, monitor and TV.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.34 no.4
• /
• pp.349-356
• /
• 2016

This study investigates two camera self-calibration approaches, on-site self-calibration and laboratorial self-calibration, both of which are based on self-calibration theory and implemented by using a commercial photogrammetric solution, Agisoft PhotoScan. On-site self-calibration implements camera self-calibration and aerial triangulation by using the same aerial photos. Laboratorial self-calibration implements camera self-calibration by using photos captured onto a patterned target displayed on a digital panel, then conducts aerial triangulation by using the aerial photos. Aerial photos are captured by an unmanned aerial vehicle, and target photos are captured onto a 27in LCD monitor and a 47in LCD TV in two experiments. Calibration parameters are estimated by the two approaches and errors of aerial triangulation are analyzed. Results reveal that on-site self-calibration excels laboratorial self-calibration in terms of vertical accuracy. By contrast, laboratorial self-calibration obtains better horizontal accuracy if photos are captured at a greater distance from the target by using a larger display panel.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2011.11a
• /
• pp.180-183
• /
• 2011

최근 3D 입체영상에 대한 소비자들의 관심 증대로 가전 업체들은 3D TV, 3D Monitor등의 제품들을 출시하고 있고, 이에 따라 3D 콘텐츠 시장도 급격히 성장할 것으로 예상된다. 또한 네트워크 인프라의 발전으로 IP(Internet Protocol)망을 통한 고화질 동영상의 유통이 가능해졌다. 하지만, QoS(Quality of Service)를 보장하지 않는 IP 기반 전송환경에서의 고화질 미디어 스트리밍 서비스는 콘텐츠를 시청하는 소비자 관점에서 필수적으로 보장되어야 하는 끊김 없는 영상서비스를 제공하는데 제약이 있다. 이러한 문제를 해결하기 위해서, IP 망 네트워크 환경을 고려하여 사용자들이 원하는 콘텐츠를 고품질 혹은 저품질로 제공 할 수 있는 Adaptive 스트리밍 서비스에 관한 기술 개발이 등장하게 되었고, 현재 국제 표준화 기구인 MPEG(Moving Picture experts Group)에서 DASH(Dynamic Adaptive Streaming over HTTP)라는 이름으로 표준화가 진행 중에 있다. 이에 본 논문에서는 DASH를 이용한 효율적 3D Adaptive 스트리밍 서비스 제공 방안을 제안한다. DASH를 이용한 3D 서비스는 사용자들에게 IP 망을 통해 다양한 품질의 3D 콘텐츠를 제공할 수 있으며, 또한 하나의 3D 콘텐츠로 다양한 디바이스에 적용 가능하다는 이점이 있다.