• 조명전기설비학회논문지
• /
• 제24권9호
• /
• pp.49-55
• /
• 2010

Many electric poles in the softground have been collapsed due to external load. In this study, 10 types of tests were performed with variation of location, numbers and depths of anchor blocks as well as depth of poles to find stresses acting on concrete electric poles. The stresses of concrete poles are relaxed at 600~700[kg] of tensile load, and stresses are concentrated at top of pole, and spread to lower part of pole. In the concrete pole collapse test, tensile load at failure was approximately 1,400[kg], which is twice of design load. As passive zone in the soil increases, the stresses acting on concrete pole are concentrated at lower part of pole based on moment arm earth pressure distribution.

• 대한인간공학회:학술대회논문집
• /
• 대한인간공학회 1994년도 춘계학술대회논문집
• /
• pp.124-135
• /
• 1994

A biomechanical model of lower extremity in seated postures was developed to assess muscular activities of lower extremity involved in a variety of foot pedal operations. It is found that nonlinear optimization method which has been used for modeling the articulated body segments does not predict the forces generated from biarticular muscles reasonably, so the revised nonlinear optimization scheme was employed to consider the synergistic effects of biarticular muscles in the model, assuming that the muscle forces are distributed proportionally based on their physiological cross sectional area and moment arm. The model incorporated four rigid body segments with the nine muscles to represent lower extreimity. For the model valida- tion, three male subjects performed the experiments in which EMG activities of the nine lower extremity muscles were measured. Predicted muscle forces were compared with the corresponding EMG amplitudes and it showed no statistical difference. The developed model can be used to design and to assess the pedals and foot-related equipments design.

• 대한기계학회논문집
• /
• 제13권5호
• /
• pp.855-861
• /
• 1989

본 연구에서는 평행 사변형 구조를 갖는 매니퓰레이터의 운동에너지와 포텐셜 에너지를 구하고, 운동 에너지 식에서 매니퓰레이터 관성 모멘트 행렬 (manipulator inertia matrix)를 구한다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.1229-1234
• /
• 2001

There are three items, which are panhead displacement, tilting angle of pan head, required moment of main shaft, which representing kinematic performance of pantograph. Kinematic variables effective on kinematic performance are length of each components and installation angle, In this study, cost function is defined with 3 items, By this cost function, length of thrust rod was optimized. Finite element analysis was used to consider structural soundness. Finite element model was qualified by comparison between analysis result with experiment result. By qualified F.E, model various severe condition was simulated to consider structural soundness.

• 아태비즈니스연구
• /
• 제10권4호
• /
• pp.197-204
• /
• 2019

The transfer pricing mechanism is a tool commonly used to transfer the tax base from countries with high taxation in countries with low taxation. In many countries, this financial operations generate significant tax revenue losses. In an attempt to limit tax revenue losses, many public authorities have introduced regulations on transfer pricing, but the effectiveness of these rules has proved limited, and they contributed to the increasing complexity of tax laws and to the appearance of additional costs for companies. Historically, transfer pricing (TP) was not a substantial issue in Mongolia. The tax legislation contains basic TP rules, but there is limited guidance and enforcement in practice. At the moment, Mongolian tax authorities are not conducting specific transfer pricing audits. Nevertheless, tax authorities are starting to pay more attention to transactions between related parties and potential transfer pricing adjustments. This study examines a transfer pricing regulations of Mongolia.

• Clinics in Shoulder and Elbow
• /
• 제24권3호
• /
• pp.178-182
• /
• 2021

A 50-year-old woman who had been previously diagnosed with systemic lupus erythematosus consulted our clinic for pain and weakness in her right shoulder. On examination, she had an atrophied deltoid muscle, a painful right shoulder on movement, and a tender mass in the deltoid area. The patient was diagnosed with corticosteroid-induced deltoid myopathy, shoulder pain, and loss of range of motion that did not resolve with conservative treatment. We decided to perform reverse shoulder arthroplasty. No complications were observed at the last follow-up visit at 3 years postoperative. Unlike deltoid insufficiency that results from axillary nerve injury, deltoid myopathy due to corticosteroid use contains intact fibers,. Therefore, we increased the effectivity of the remaining deltoid fibers by extending the moment arm of the anterior fibers using reverse shoulder arthroplasty and achieved reliable improvements in clinical symptoms and function without increasing the risk of dislocation.

• The Journal of Korean Physical Therapy
• /
• 제18권6호
• /
• pp.1-11
• /
• 2006

연구목적: 이 연구는 피부표면 냉각이 생체내의 건구조 점탄성 특성에 미치는 영향을 비교하였다. 방법: 7명의 남성 실험 대상자는 족저굴곡 운동을 10회$\times$10set, 60초 간격으로 최대 수의적 수축을 6초간 각각 실시하였다. 각 측정 전후에 내측 비복근(MG)의 건과 건막의 신장은 초음파 검사법에 의하여 직접 측정되었다(건 장력과 건 신장의 관계로 평가 되었다). 건 횡단면적과 족 관절 모멘트 암은 자기공명영상법(MRI)으로부터 얻어졌다. 건 장력은 관절 모멘트와 건 모멘트 암으로 계산되었다. 또한 스트레스는 횡단면적영역(CSA)을 힘으로 나눔으로써 얻어졌다. 스트레인은 건의 길이로 표준화된 치환으로부터 측정되었다. 결과: 냉각 후에 건 장력은, 비냉각 보다 냉각한 측이 유의하게 높았다. 스티프네스는 비냉각 조건 보다 냉각 조건하에서 높은 유의수준을 나타냈다. 최대의 스트레인과 스트레스는 냉각조건하에서 $7.4{\pm}0.7$와 $36.4{\pm}1.8$ MPa을 나타냈고, 비냉각 조건하가 $7.8{\pm}8.5$ 와 $31.8{\pm}1.1$ MPa (p<0.05)을 나타냈다. 결론: 이 연구의 결과는 피부표면 냉각으로 인해 인간의 근지구력이 건 스티프네스와 탄성률을 증가시키는 것을 시사하는 연구라 하겠다. 피부 표면 냉각으로 인한 근지구력의 개선이 근과 건에 직접적인 영향을 미침을 나타내주고 있다.

• 해양환경안전학회지
• /
• 제30권2호
• /
• pp.176-183
• /
• 2024

주로 소형어선에서 발생하고 있는 연근해에서의 전복사고를 예방하기 위해 소형어선의 복원성 평가는 중요하다. 하지만 국내 「어선법」에서는 24m 미만의 소형어선에 대한 복원성 평가 규정이 미비한 실정이다. 2022년 해양수산부에서 안전복지를 강화하여 고시한 표준어선형에 관한 안전성 기준에 따르면, 표준어선형을 따르는 선박은 길이와 무관하게 안전성 기준에 따른 복원성을 가져야 한다. 이에 본 연구에서는 상기 기준을 활용하여 24m 미만에 해당하는 4.99톤급 어선에 대한 복원성 평가를 수행하고 해당 기준으로 복원성을 평가하는 것이 적합한지 검토하는 것을 목표로 한다. 또한 다양한 상부구조물을 가지는 4.99톤급 소형어선에 대해서도 해당 기준이 유효한지 검토를 수행한다. 이를 위해 어선의 초기횡메타센타높이(GM)를 이용한 초기복원성과 한계경사각에서의 복원정(GZ_α)을 평가하였다. 그리고 현재 표준어선형의 소형어선에서 주로 활용되는 상부구조물의 형태를 활용하여 대상선과 동일한 하부 선형과 제원을 가지는 소형어선 6종을 추가로 선정하여 상부구조물 변화에 따른 복원성 변화도 검토하였다. 4.99톤급의 표준어선형을 대상으로 한 연구 결과, 안전복지를 강화한 표준어선형에 대한 안전성 기준은 4.99톤급 표준어선형의 어선에도 적용 가능하며, 상부구조물에 변화에 따른 복원성 변화는 크지 않은 것으로 확인되었다.

• Korea-Australia Rheology Journal
• /
• 제14권1호
• /
• pp.33-45
• /
• 2002

Recent results obtained for the port-pom model and the constitutive equations with time-strain separability are examined. The time-strain separability in viscoelastic systems Is not a rule derived from fundamental principles but merely a hypothesis based on experimental phenomena, stress relaxation at long times. The violation of separability in the short-time response just after a step strain is also well understood (Archer, 1999). In constitutive modeling, time-strain separability has been extensively employed because of its theoretical simplicity and practical convenience. Here we present a simple analysis that verifies this hypothesis inevitably incurs mathematical inconsistency in the viewpoint of stability. Employing an asymptotic analysis, we show that both differential and integral constitutive equations based on time-strain separability are either Hadamard-type unstable or dissipative unstable. The conclusion drawn in this study is shown to be applicable to the Doi-Edwards model (with independent alignment approximation). Hence, the Hadamardtype instability of the Doi-Edwards model results from the time-strain separability in its formulation, and its remedy may lie in the transition mechanism from Rouse to reptational relaxation supposed by Doi and Edwards. Recently in order to describe the complex rheological behavior of polymer melts with long side branches like low density polyethylene, new constitutive equations called the port-pom equations have been derived in the integral/differential form and also in the simplifled differential type by McLeish and carson on the basis of the reptation dynamics with simplifled branch structure taken into account. In this study mathematical stability analysis under short and high frequency wave disturbances has been performed for these constitutive equations. It is proved that the differential model is globally Hadamard stable, and the integral model seems stable, as long as the orientation tensor remains positive definite or the smooth strain history in the flow is previously given. However cautious attention has to be paid when one employs the simplified version of the constitutive equations without arm withdrawal, since neglecting the arm withdrawal immediately yields Hadamard instability. In the flow regime of creep shear flow where the applied constant shear stress exceeds the maximum achievable value in the steady flow curves, the constitutive equations exhibit severe instability that the solution possesses strong discontinuity at the moment of change of chain dynamics mechanisms.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.181-184
• /
• 2008

단순지지된 콘크리트 보 부재의 경우 전단 경간에서 내부 모멘트 팔길이가 변화하는 아치 현상이 발생하게 된다. 최근 이러한 점을 고려한 전단해석모델이 개발되었으나 집중 하중에 대해서만 적용할 수 있어 등분포 하중과 같은 보다 일반적인 하중에 대해서는 적용할 수 없는 실정이다. 따라서 본 연구에서는 일반적인 분포하중에 대해 내부 모멘트 팔길이의 변화에 대한 기본 식을 유도하고, 특히 등분포하중이 작용할 경우 아치 작용에 의한 전단력의 비율을 산정하는데 있어 이용되는 전단변형적합 조건을 도출하였다. 제안된 해석 모델을 이용하여 기존 연구자가 수행했던 RC보를 해석하여 그 경향을 분석한 결과, 등분포하중을 받는 RC보의 경간에 따른 전단변형률의 변화를 어느 정도 잘 묘사하는 것으로 나타났다. 하지만, 전단변형률이 작게 예측되는 것으로 보아 아치 작용에 의한 전단력의 영향을 추가적으로 고려해야 할 것으로 사료된다.