• 한국수산과학회지
• /
• 제36권4호
• /
• pp.333-339
• /
• 2003

New manufacturing process was applied to manufacture the low salted Squid-Jeotgal to improve the quality variation salty taste and shelf-life. It's optimum salting and sugaring process was made by the addition of $17\%$ NaCl for 3 hr and $15\%$ corn syrup for 4 hr with 10 rpm agitation. Quality variations of Squid-Jeotgal produced by the improved and the conventional process were packed by jar, polyethylene lerephthalatefpolyethyleneilinear low density polyethylene (PET) and low density polyethylene (PE). And then quality variations of them were investigated at storage temperature of 10, 20, and $30^{\circ}C.$ Decreasing rate of pH, increasing rates of VBN and viable cell counts of Squid-Jeotgal produced by the improved process were slower than those of the conventional process at all storage temperature. Sensory evaluation indicated that the production of Squid-Jeotgal by the improved process extended the shelf-life about 10-20 days.

• International Journal of Precision Engineering and Manufacturing
• /
• 제2권1호
• /
• pp.62-75
• /
• 2001

The design and manufacture of injection molded polymeric parts with desired properties is a costly process dominated by empiricism including repeated modification of actual tooling. This paper presents and expert design evaluation system which can predict the mechanical performance of a molded product and diagnose the design before the actual mold is machined. The knowledge-based system synergistically combines a rule-based expert system with CAE programs. An iterative boundary pressure reflection method(IBPR) is developed to automate the cavity filling simulation program and to predict thermo-mechanical properties of a molded part precisely. Mathematical models of weldline and frozen-in molecular orientation are established to determine the spatial variation of microstructural anisotropies of a molded part from the result of cavity filling simulation. The strength ellipse is devised as and index which represents th spatial distribution of the microstructural anisotropies of a molded part, Heuristic knowledge of injection molding, flow simulation, and mechanical performance prediction is formalized as rules of an expert consultation system. The expert system interprets the analytical results of the process simulation, predicts the performance, evaluates the design and generates recommendations for optimal design alternative.

• 접착 및 계면
• /
• 제14권4호
• /
• pp.197-211
• /
• 2013

계면활성제는 상간의 경계면 활성화를 통한 표면장력의 강하능력을 가져 모든 세제(detergents)와 화장품(cosmetics)에 사용되는 필수 주원료이다. 합성세제란 석유화학계의 EO (ethylene oxide), LAB (linear alkylbenzene) 등의 합성계면활성제로 제조한 제품으로 이는 난분해성으로 지구환경, 특히 하천과 강물오염의 주범으로 생태계파괴의 원인이 되고 있다. 이는 또한 분자가 작아 침투력이 강해 피부를 자극하여 아토피피부염을 유발하고 모세관을 통해 기관으로 들어가면 암을 유발할 수도 있다. 최근 합성계면활성제를 대체할 수 있는 양친매성의 생분해성 친환경 및 무자극의 다기능성물질로서 천연 계면활성제 또는 생합성의 생물 계면활성제(biosurfactants)의 개발에 국제적인 관심이 고조되고 있다.

• 센서학회지
• /
• 제26권6호
• /
• pp.379-385
• /
• 2017

In this study, an amperometric non-enzymatic glucose sensor was developed on the surface of a glassy carbon electrode by simply drop-casting the synthesized homogeneous suspension of hexagonal boron nitride (h-BN) nanosheets with a copper metal-organic framework (Cu-MOF) composite. Comprehensive analytical methods, including field-emission scanning electron microscopy (FE-SEM), Fourier-transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), cyclic voltammetry, electrochemical impedance spectroscopy, and amperometry, were used to investigate the surface and electrochemical characteristics of the h-BN-Cu-MOF composite. The FE-SEM, FT-IR, and XRD results showed that the h-BN-Cu-MOF composite was formed successfully and exhibited a good porous structure. The electrochemical results showed a sensor sensitivity of $18.1{\mu}A{\mu}M^{-1}cm^{-2}$ with a dynamic linearity range of $10-900{\mu}M$ glucose and a detection limit of $5.5{\mu}M$ glucose with a rapid turnaround time (less than 2 min). Additionally, the developed sensor exhibited satisfactory anti-interference ability against dopamine, ascorbic acid, uric acid, urea, and nitrate, and thus, can be applied to the design and development of non-enzymatic glucose sensors.

• 한국임상수의학회지
• /
• 제35권4호
• /
• pp.119-125
• /
• 2018

In vitro diagnostic veterinary medical reagents (IVDVMRs) were diverted the medical devices from medicine by the revision of the pharmaceutical affairs act enforcement regulations in 2015 in Korea. It classified into class I-IV according to risks of individual and public health. However, good manufacturing practices requirements on IVDVMRs were exempted from the current system. The registration of IVDVMRs by the Animal and Plant Quarantine Agency has gradually increased since 2012, and total of 584 products from 68 companies were registered from 1978 to 2017. Most of these items are clinical immunochemistry (infection disease), clinical immunochemistry (non-infection disease), molecular genetics, endocrinology, blood gas analysis, clinical microbiology, toxin, heavy metal and drug of abuse, other etc. The market size of IVDVMRs reported from the Korea Animal Health Products Association was estimated to be approximately 51.9 billion won in 2017. The domestic consumption and the export sales were approximately 31.2 and 20.7 billion won, respectively. They are increasing 23.9% (CAGR) in domestic consumption and 40.4% (CAGR) in export from 2011 to 2017.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1722-1724
• /
• 1996

Enhancing the electrical conductivity of the ultrathin organic films is one of the important factors for the development of molecular electronic devices. The Langmuir-Blodgett(LB) technique has recently been attracted as out of the ways of deposition ultrathin films. We have studied manufacturing conditions and physical properties of Hexadecyl Dipyridinium-$(TCNQ^-)_2$ LB films made by Kuhn type apparatus. A ${\pi}-A$ isotherm shows that a limiting area is around $180{\AA}^2/molecule$ and a proper surface pressure for a deposition is around 22mN/m. A transfer ratio shows that Hexadecyl Dipyridinium-$(TCNQ^-)_2$ is able to be deposited as an Y-type. UV /visible absorption spectra shows that TCNQ dimer peak is apeared at about 600nm in LB films. In solution, $TCNQ^-$ peak is observed at about 400nm and charge transfer band at $830{\sim}900nm$. A horizontal conductivity of the Hexadecyl Dipyridinium-$(TCNQ^-)_2$ LB film is about $10^{-7}(S/cm)$.

• Journal of the Korean Wood Science and Technology
• /
• 제26권1호
• /
• pp.29-37
• /
• 1998

Alkali-soluble extracts were prepared from medium-sized barks of Radiata pine(Pinus radiata). There are difficulties in the production of extracts with uniform quality and in the preparation of adhesives with suitable viscosity. Ultrafiltration using an Amicon cell was subjected to fractionate extracts according to molecular sizes in order to overcome the above problem. The filtration efficiency was studied by using thin channel filtration systems. Adhesive manufacturing was also examined. Removal of particles greater than 0.45m from the extracts increased both filtration speed (flux) and yields of solids in the filtrates. Ultrafiltration with PM 10 membrane was very effective to fractionate and concentrate the extracts. Stiasny precipitates from the filtrates obtained by PM 10 membrane were very lower than that(83%) of the retentates. This ultrafiltration method was efficient for obtaining high yield purified phenolic compounds(mainly polyflavanoids) and thus important for preparing wood adhesives from barks. The extracts were shown excessive high viscosities at the concentrations required for adhesive formulation, but this high viscosity and short gelation time was reduced by lowering pH of the extracts and addition of urea. The highest bonding strength of plywoods(340g/$m^2$ of adhesive spreads) was achieved with adhesive formulated by 100parts of mixed alkali extracts and urea(70/30,w/w), 10parts of p-formaldehyde and 3.5parts of wheat flour at pH 6, and by hot pressing at the conditions of 12kg/$cm^2$ at $120^{\circ}C$ for 10 minutes.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 1996년도 춘계학술발표회 초록집
• /
• pp.73-87
• /
• 1996

The outer-most electrons of metal atoms and the remining valence electrons of any molecular atoms make three dimensional crystallizing $\pi$-bondings. The electrons on the $\pi$-bonding orbital rotate clockwise or counter-clockwise and they then make electro-magnetic waves between atoms on the orbital because electron move between plus charged ions. The three dimensional crystallizing $\pi$-bonding orbitals are quantum-mechanically modeled by a cyclic Kronig-Penny Model and energy band structures are analyzed with their potential barrier thickness. The waves generated between plus charged ions are the particular $\pi$-far infrared rays, which have dual properties between material and electro-magnetic waves and can be measured not by modern electro-magnetic tester but biosensor such as finger's force tester. Because the $\pi$-rays can be modulated with electro-magnetic waves it can be applied for harmful electro-magnetic wave killers. Because the $\pi$-rays make new three dimensional crystallizing $\pi$-bonding orbitals in the material the food and drink can be transformed into a helpful physical constitutional property for human health. Distinction between crystalline and amorphous metals is possible because very strong crystalline $\pi$-bonding orbitals can not easily be transformed into another. The $\pi$-rays can also be applied for biofunctional diagnostics and therapy. Gravitational field is one of the electro-magnetic fields. And also magnetic field and gravitational force field make charge's movement. ($\times$ = q, : magnetic field, : force field, q: plus charge, : velocity field)

• Food Science and Biotechnology
• /
• 제18권2호
• /
• pp.362-366
• /
• 2009

This research was conducted to determine the effect of far-infrared ray (FIR) irradiation of grape berries as a potential application for manufacturing grape products with a high amount of antioxidant chemicals. Two grape cultivars, the red grape cv. Campbell Early and the white grape cv. Thompson Seedless, produced increased amounts of crude extracts, in the FIR treatments compared to a non-FIR treatment control with same temperature. However, total phenolic concentrations and antioxidant activity in a 'Campbell Early' increased in the extracts following FIR treatment, whereas those of 'Thompson Seedless' did not increase significantly. High performance liquid chromatography (HPLC) analysis indicated that functional components affecting antioxidant activity were significantly increased in the extract of 'Campbell Early' following FIR treatment. Our results indicate that application of FIR treatment in heat process of grapes increases levels of antioxidative phenolic chemicals and it may help to enhance the availability of antioxidative compounds in various grape food products.

• Carbon letters
• /
• 제15권4호
• /
• pp.290-294
• /
• 2014

New precursors, poly(acrylonitrile-co-crotonic acid) (poly(AN-CA)) and poly(acrylonitrile-co-itaconic acid-co-crotonic acid) (poly(AN-IA-CA)) copolymers, for the preparation of carbon fibers, were explored in this study. The effects of comonomers with acidic groups, such as crotonic acid (CA) and/or itaconic acid (IA), on the stabilization of nanofibrous polyacrylonitrile (PAN) copolymers were studied. The extent of stabilization, evaluated by Fourier transform infrared spectroscopy, revealed that the CA comonomer could retard/control the stabilization rate of PAN, in contrast to the IA comonomer, which accelerated the stabilization process. Moreover, the synthesized PAN copolymers containing CA possessed higher Mv than those of the IA copolymers and also showed outstanding dimension stability of nanofibers during the stabilization, which may be a useful property for improving the dimensional stability of polymer composites during manufacturing.