• Journal of Environmental Science International
• /
• v.16 no.6
• /
• pp.671-675
• /
• 2007

The objective of this study was to clarify the characteristics of the removed micropollutant since the breakthrough of adsorption ability was occurred in biological activated carbon(BAC) process. The removal efficiency of DOC (Dissolved Organic Carbon) was 36 % in the breakthrough of BAC occurred by NOM (Natural Organic Matter). The most of removal DOC was found out the adsorbable and biodegradable DOC (A&BDOC). But it was not clear to remove by any mechanism because A&BDOC have simultaneously the adsorption of activated carbon and biodegradation by microorganism in BAC. The removal of bromophenol was examined with BAC and rapid sand filter, for investigation of DOC removal mechanism in the breakthrough of BAC. In this experiment, BAC filter has been operated for 20 months for the treatment of reservoir water. The BAC filter was already exhausted by NOM. Bromophenol, adsorbable and refractory matter, was completely removed by BAC filter. Therefore, it might be removed by the adsorption in BAC. Adsorption isotherms of bromophenol were compared to two BACs which was preloaded with 500 daltons and 3,000 daltons of NOM. BAC preloaded with 3,000 daltons of NOM was not decreased to the adsorbability of bromophenol but BAC preloaded with 500 daltons of NOM was greatly decreased to it. These result indicated that NOM of low molecular weight can be removed by adsorption after a long period of operation and the breakthrough by NOM in BAC. Therefore, micropollutants might be removed through adsorption by saturated BAC.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.52 no.5
• /
• pp.201-205
• /
• 2003

We synthesized dendrimers containing light switchable units, azobenzene group. And the dendrimer containing 48 pyridinepropanol functional end group, which could form a complex structure with metal ions was synthesized. To apply to the molecular level devices or data storage system using Langmuir-Blodgett(LB) film, we firstly investigated the monolayer behavior using the surface pressure-area($\pi$-A) isotherms at air-water interface. And then the surface pressure shift of monolayer by light irradiation was also measured to the dendrimer with azobezene group. As a result, the monolayer of dendrimer with azobenzene group showed the reversible photo-switching behavior by the isomerization of azobenzene group in their periphery. The samples for electrical measurement were fabricated to two types which were pure dendrimer with pyridinepropanol group and its complexes with $Pt^4+$ ions by LB method. We have studied the electrical properties of the ultra thin dendrimer LB films investigated by the current-voltage(I-V) characteristics of Metal/Dendrimer LB films/Metal(MIM) structure. And we have investigated different results in the surface activity at the air-water interface as well as the electrical properties for the monolayers of pure dendrimer with pyridinevopanol group and its complex with $Pt^4+$ ions. In conclusion, it is demonstrated that the metal ion around dendrimer with pyri야nepropanol group can contribute to make formation of network structure among dendrimers and it result from the change of electrical properties. This results suggest that the dendrimers with azobenzene group and pvridinedropanol group can be applied to high efficient nano-device of molecular level.

• Applied Microscopy
• /
• v.36 no.spc1
• /
• pp.35-40
• /
• 2006

Self-assembled InAs/GaAs quantum dots (QDs) were grown by the atomic layer epitaxy (ALE) and molecular beam epitaxy (MBE) techniques, The structure and the thermal stability of QDs have been studied by high resolution electron microscopy with in-situ heating experiment capability, The ALE and MBE QDs were found to form a hemispherical structure with side facets in the early stage of growth, Upon capping by GaAs layer, however, the apex of QDs changed to a flat one. The ALE QDs have larger size and more regular shape than those of MBE QDs. The QDs collapse due to elevated temperature was observed directly in atomic scale, In situ heating experiment within TEM revealed that the uncapped QDs remained stable up to $580^{\circ}C$, However, at temperature above $600^{\circ}C$, the QDs collapsed due to the diffusion and evaporation of In and As from the QDs, The density of the QDs decreased abruptly by this collapse and most of them disappeared at above $600^{\circ}C$.

• Journal of Microbiology and Biotechnology
• /
• v.27 no.9
• /
• pp.1576-1585
• /
• 2017

Yeasts, filamentous fungi, and bacteria colonize the surface of fermented sausages during the ripening process. The source of this microbiota is their surrounding environment, and is influenced by the maturing conditions and starter cultures. Debaryomyces hansenii was previously isolated from several dry-cured meat products and associated with the lipolytic and proteolytic changes that occur in these products, influencing their taste and flavor. Therefore, this study isolated the yeast microbiota present in the casing from different meat products ("lomo," "chorizo," and "$salchich{\acute{o}}n$") from the Valle de los Pedroches region in southern Spain. D. hansenii was by far the most abundant species in each product, as all 22 selected isolates were identified as D. hansenii by biochemical and/or molecular methods. In contrast, no yeasts were found in the meat batter. These data constitute the first study of the yeasts present in "lomo" sausages and particularly the highly appreciated Valle de los Pedroches "lomo" sausages. Furthermore, the resistance of these isolates to different pHs, temperatures, and saline stress was studied, together with their catabolic characteristics. Based on the results, certain isolates are proposed as valuable candidate starter cultures that could improve both the manufacture and the flavor of such dry-cured meat products, and provide an understanding of new mechanisms involved in stress tolerance. Applied medium-scale industrial tests are currently in progress.

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.1197-1199
• /
• 1993

The molecular electronic devices of organic materials are of current interest. Langmuir-Blodgett(LB) method is the most possible candidate for the development of the molecular electronic devices. One of the critical problems for applications of the LB films to the commercial products will be an electrical conductivity within a LB film. We studied the monolayer characteristics and electrical conductivity of the 1:1 mixture LB films of N-docosylquinolium-TCNQ and $TCNQ^0$. There were some differences in the $\pi-A$ isotherm and UV-visible absorption spectrum of N-docosylquinolium-TCNQ and 1:1 mixture. The small critical area of the $\pi-A$ isotherm for 1:1 mixture may result from the bilayer formation. We confirmed the incorporation of the $TCNQ^0$ with the N-docosylquinolium-TCNQ from the UV-visible absorption spectrum. But the electrical conductivity measured was $10^{-7}$ S/cm for the 1:1 mixture film layered at the surface pressure of 35 mN/m. We couldn't gain any electrical conductivity by mixing the $TCNQ^0$ into the N-docosylquinolium-TCNQ layer. We supposed that $TCNQ^0$ mixed in was not packed parallel to the TCNQ anion radical faces.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.52 no.5
• /
• pp.201-201
• /
• 2003

We synthesized dendrimers containing light switchable units, azobenzene group. And the dendrimer containing 48 pyridinepropanol functional end group, which could form a complex structure with metal ions was synthesized. To apply to the molecular level devices or data storage system using Langmuir-Blodgett(LB) film, we firstly investigated the monolayer behavior using the surface pressure-area($\pi$-A) isotherms at air-water interface. And then the surface pressure shift of monolayer by light irradiation was also measured to the dendrimer with azobezene group. As a result, the monolayer of dendrimer with azobenzene group showed the reversible photo-switching behavior by the isomerization of azobenzene group in their periphery. The samples for electrical measurement were fabricated to two types which were pure dendrimer with pyridinepropanol group and its complexes with $Pt^4+$ ions by LB method. We have studied the electrical properties of the ultra thin dendrimer LB films investigated by the current-voltage(I-V) characteristics of Metal/Dendrimer LB films/Metal(MIM) structure. And we have investigated different results in the surface activity at the air-water interface as well as the electrical properties for the monolayers of pure dendrimer with pyridinevopanol group and its complex with $Pt^4+$ ions. In conclusion, it is demonstrated that the metal ion around dendrimer with pyri야nepropanol group can contribute to make formation of network structure among dendrimers and it result from the change of electrical properties. This results suggest that the dendrimers with azobenzene group and pvridinedropanol group can be applied to high efficient nano-device of molecular level.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07a
• /
• pp.74-77
• /
• 2004

[ $HfO_2$ ] dielectric layers were grown on the p-type Si(100) substrate by metalorganic molecular beam epitaxy(MOMBE). Hafnium $t-butoxide[Hf(O{\cdot}t-C_4H_9)_4]$ was used as a Hf precursor and Argon gas was used as a carrier gas. The thickness of the layers was measured by scanning electron microscopy (SEM) and high-resolution transmission electron measurement(HR-TEM). The properties of the $HfO_2$ layers were evaluated by X-ray diffraction(XRD), high frequency capacitance-voltage measurement(HF C-V), current-voltage measurement(I-V), and atomic force measurement(AFM). HF C-V measurements have shown that $HfO_2$ layer grown by MOMBE has a high dielectric constant(k=19-21). The properties of $HfO_2$ films are affected by various process variables such as substrate temperature, bubbler temperature, Ar, and $O_2$ gas flows. In this paper, we examined the relationship between the $O_2/Ar$ gas ratio and the electrical properties of $HfO_2$.

• Polymer(Korea)
• /
• v.35 no.4
• /
• pp.308-313
• /
• 2011

The ring-opening isomerization polymerization behavior of 2,5,6,7-tetrahydro-3H-imidazo[2,1-b] [1,3] oxazine(TII) has been studied under various conditions. The present study aimed at improving the low polymerizability of the above monomer (six-membered ring) up to a level comparable to that of 2,5,6-tetrahydroimidazo[2,1-b] [l,3] oxazole(TIO) (five-membered ring). The optimum result could be observed when methyl trifluoromethanesulfonate(MeOTf) and nitrobenzene were used as an initiator and a solvent in the polymerization at $60^{\circ}C$ for 24 h. Polymers were confirmed by$^1H$ NMR과$^{13}C$ NMR, and m measurements. The molecular weight obtained by gel permeation chromatography (GPC) corresponded to the molecular weight theoretically calculated from the feed ratio. The melting temperature ($T_m$) of TII was conspicuously different from that of TIO, because of the difference in the alkyl group.

• Journal of Korean Society on Water Environment
• /
• v.21 no.3
• /
• pp.242-247
• /
• 2005

In this study, we investigated the removal efficiencies of pollutants and permeate fluxes depending on chemistry of feed water, various molecular weight cut-offs (MWCOs) and materials of membrane, operating pressure. We used seven MWCO membranes of YC0.5, YM1, YM3, YM10, YM30, YM100 and PM30, humic acid solution and surface water as feed water, and examined variation in permeate flux. Results of TOC removal experiment demonstrate that MWCO lower 1,000daltons could remove humic acid effectively. As increasing solution pH and decreasing divalent cations ($Ca^{2+}$) concentration, TOC removal increased. But $UV_{254}$ removal efficiency increased with higher divalent cation concentration and solution pH. Membrane fouling increased with increasing electrolyte (NaCl), divalent cation concentration and decreasing solution pH. In spite of initial permeate flux of the hydrophobic membrane (PM30) was higher than that of the hydrophilic membrane (YM30), flux decline of PM30 was significant during operation. At higher operating pressure, compactness of the cake layer on the membrane surface increased, resulting in gradual increase in hydraulic resistance.

• Journal of Life Science
• /
• v.22 no.3
• /
• pp.285-292
• /
• 2012

Genus Spiraea is composed of many long-lived woody species that are primarily distributed throughout Asia and Europe. In this study, we evaluated a representative sample of the 38 taxa in the world, including 14 in Korea, with nuclear ribosomal DNA internal transcribed spacer sequences (ITS) to estimate genetic relationships within the genus. The molecular data allowed us to resolve well-supported clades in the taxa. In 47 world accessions (38 taxa: 14 Korean taxa, 33 world taxa, and 9 overlapping taxa), total alignment length was 689 positions, of which 452 were parsimony informative, 527 variable, 75 singleton, and 159 constant characters. Although the phylogenic tree showed that many taxa of genus Spiraea were well separated from each other, many branches were not congruent with the morphological characteristics and geographical distributions of the genus. There were 430 segregating sites and the nucleotide diversity (${\pi}$) value was 0.281. Under the neutral mutation hypothesis, the probability that the Tajima test statistic (D) is positive (2.325) is more than 0.5. Therefore, there may be a site at which natural selection, which increases genetic variation, is operating.