• Journal of KIISE:Computer Systems and Theory
• /
• v.32 no.2
• /
• pp.75-84
• /
• 2005

This research is to design a high performance NAND-type flash memory package with a smart buffer cache that enhances the exploitation of spatial and temporal locality. The proposed buffer structure in a NAND flash memory package, called as a smart buffer cache, consists of three parts, i.e., a fully-associative victim buffer with a small block size, a fully-associative spatial buffer with a large block size, and a dynamic fetching unit. This new NAND-type flash memory package can achieve dramatically high performance and low power consumption comparing with any conventional NAND-type flash memory. Our results show that the NAND flash memory package with a smart buffer cache can reduce the miss ratio by around 70% and the average memory access time by around 67%, over the conventional NAND flash memory configuration. Also, the average miss ratio and average memory access time of the package module with smart buffer for a given buffer space (e.g., 3KB) can achieve better performance than package modules with a conventional direct-mapped buffer with eight times(e.g., 32KB) as much space and a fully-associative configuration with twice as much space(e.g., 8KB)

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.10
• /
• pp.1061-1070
• /
• 2009

In this paper, we have designed TDL(True-time Delay Line) for eliminating beam-squint occurring in active phased array antenna with large electrical size operated in wide bandwidth, and have tested its electrical performance. The proposed TDL device is composed of 4-bit microstrip delay line structure and MMIC amplifier for compensation of the delay-line loss. The measured results of gain and phase versus delay state satisfy the electrical requirements, also P1dB output power and noise figure meet the requirement. To verify the performance of fabricated TDL, we have simulated the beam patterns of wide-band active phased array antenna using the measured results and have certified the beam pattern compensation performance. As a result of simulated beam pattern compensation with respect to the 675.8 mm size antenna which is operated in X-band, 800 MHz bandwidth, we have reduced the beam squint error of ${\pm}1^{\circ}$ with ${\pm}0.1^{\circ}$. So this TDL module is able to be applied to active phase array antenna system.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.334-339
• /
• 2008

Construction that over 70% of the structure consists of concrete gets bigger and higher gradually and the demand of that is increasing as well. However, it's not easy to supply young and skilled persons on construction site because of social avoidance phenomena about 3D occupation, so it causes serious problems like aging and shortage of technicians. To solve the problems, executives related to the construction field make a management effort in various ways such as construction period shortening, labor productivity improvement and good quality but recently, they have an increasing interest in the necessity of the modularization of the high-rise building and the automation of the engineering development for the strengthening of international competitive power as more active and long-term alternatives. Therefore, this study is to propose the roadmap in order to make lots of efforts in developing construction technologies of high-rise buildings by performing a foundation study, the strategy for 4-step research development, on modularized construction system of concrete structure of high-rise buildings through domestic and foreign preceding research analyses associated with optimal design modularization technique, module factory automation and assembly automation of modularized objects.

• The KIPS Transactions:PartC
• /
• v.14C no.3 s.113
• /
• pp.209-220
• /
• 2007

IPS(Intrusion Prevention Systems), which is installed in inline mode in a network, protects network from outside attacks by inspecting the incoming/outgoing packets and sessions, and dropping the packet or closing the sessions if an attack is detected in the packet. In the signature based filtering, the payload of a packet passing through IPS is matched with some attack patterns called signatures and dropped if matched. As the number of signatures increases, the time required for the pattern matching for a packet increases accordingly so that it becomes difficult to develop a high performance US working without packet delay. In this paper, we propose a high performance IPS based on signature hashing to make the pattern matching time independent of the number of signatures. We implemented the proposed scheme in a Linux kernel module in a PC and tested it using worm generator, packet generator and network performance measure instrument called smart bit. Experimental results show that the performance of existing method is degraded as the number of signatures increases whereas the performance of the proposed scheme is not degraded.

• Journal of the Korean Institute of Gas
• /
• v.15 no.5
• /
• pp.50-56
• /
• 2011

A preliminary experimental study of new concept air hybrid engine, which stores compressed air in the tank during braking and re-use it to propel vehicle during crusing or acceleration, was carried out in this study. A single cylinder engine was modified to realize the concept of air hybrid engine. Independent variable valve lift system was adopted in one of the exhaust valves to store the compressed air into the air tank during compression period. An air injector module was installed in the place of spark plug, and the stored compressed air was supplied during the expansion period to realize air motoring mode. For air compression mode, the tank with volume of 30 liter could be charged up to more than 13 bar. By utilizing this stored compressed air, motoring work of 0.41 bar of IMEP(Indicated mean effective pressure) at maximum can be generated at the 800rpm conditions, which is higher than the case of normal idle condition by 1.1 bar of IMEP.

• 대한공업교육학회지
• /
• v.34 no.2
• /
• pp.267-285
• /
• 2009

The collaborative learning has been considered as an efficient teaching model and under the recent basic learning environment, even face-to-face classroom circumstance rapidly increases the courses of blended learning which utilize the merits of e-learning environment. Nonetheless, the study on the strategy for systematic blended learning is quite scarce. In this study, the survey was done for developing the blended learning strategy, based on the collaborative learning model at the face-to-face environment and judging the satisfaction on the courses which the model was applied to. The survey consists of demographic questions, satisfaction in the whole courses, satisfaction in the collaborative learning under the blended learning environment and satisfaction in the blended learning strategy and support tools applied to each step of the learning. The result of this study is as follows. First, in response to the question that the blended learning can complement the face-to-face classroom courses, the respondents represented average 4.09 at 5-point Likert scale. And to the question whether the collaborative learning is more efficient under the blended learning environment than the face-to-face classroom, the response corresponds to 4.06 scale on the average. Second, as for the satisfaction in the blended learning strategy and support tools applied to the each step of the blended learning, the satisfaction degree is analyzed as high as over 4.0 on the average toward all the questions. Third, regarding the support tools used for the blended learning strategy, the learners consider the tools as most helpful in order of chatting, team community, mail & note and archive. Lastly, I would like to suggest that the study result should be highly reflected in constructing the collaborative learning module of learning control system in the future.

• Journal of Korea Multimedia Society
• /
• v.7 no.8
• /
• pp.1131-1144
• /
• 2004

In this paper, we investigate a problem with an e-learning system for e-business environments and introduce the solving method of the problem. To be more accurate, existing Web-hosted and ASP (Application Service Provider)-oriented service model is difficult to cooperate and integrate among the different kinds of systems. So we have produced sharable and reusable learning object, they have extracted a principle from pedagogical designs for units of reuse. We call LIO (Learning Item Object). This modeling makes use of a constructing for XML Web Services. So to speak, units of reuse from pedagogical designs are test tutorial, resource, case example, simulation, problem, test, discovery and discussion and then map introduction, fact, try, quiz, test, link-more, tell-more LIO learning object. These typed LIOs are stored in metadata along with the information for a content location. Each one of LIOs is designed with components and exposed in an interface for XML Web services. These services are module applications, which are used a standard SOAP (Simple Object Access Protocol) and locate any computer over Internet and publish, find and bind to services. This guarantees the interoperation and integration of the different kinds of systems. As a result, the problem of e-learning systems for e-business environments was resolved and then the power of understanding about learning objects based on pedagogical design was increased for learner and instruction designers. And organizations of education hope for particular decreased costs in constructing e-learning systems.

• The KIPS Transactions:PartA
• /
• v.12A no.3 s.93
• /
• pp.205-214
• /
• 2005

Flash memory is at high speed used as storage of personal information utilities, ubiquitous computing environments, mobile phones, electronic goods, etc. This is because flash memory has the characteristics of low electronic power, non-volatile storage, high performance, physical stability, portability, and so on. However, differently from hard disks, it has a weak point that overwrites on already written block of flash memory is impossible to be done. In order to make an overwrite possible, an erase operation on the written block should be performed before the overwrite, which lowers the performance of flash memory highly. In order to solve this problem the flash memory controller maintains a system software module called the flash translation layer(FTL). Of many proposed FTL schemes, the log block buffer scheme is best known so far. This scheme uses a small number of log blocks of flash memory as a write buffer, which reduces the number of erase operations by overwrites, leading to good performance. However, this scheme shows a weakness of low page usability of log blocks. In this paper, we propose an enhanced log block buffer scheme, FAST(Full Associative Sector Translation), which improves the page usability of each log block by fully associating sectors to be written by overwrites to the entire log blocks. We also show that our FAST scheme outperforms the log block buffer scheme.

• The KIPS Transactions:PartA
• /
• v.10A no.6
• /
• pp.691-700
• /
• 2003

Due to the fast development of wire&wireless internet and computer hardware, more and more internet services are being developed, such as Internet broadcast, VoD (Video On Demand), etc. So QoS (Qualify of Service) is essentially needed to guarantee the quality of these services. Traditional Internet is Best-Effort service in which all packets are transported in FIFO (First In First Out) style. However, FIFO is not suitable to guarantee the quality of some services, so more research in QoS router and QoS protocol are needed. Researched QoS router and protocol are high cost and inefficient because the existing infra is not used. To solve this problem, a new QoS control method, named Network Adaptive QoS, is introduced and applied to client/server-based streaming systems. Based on network bandwidth monitoring mechanism, network adaptive QoS control method can be used in wire&wireless networks to support QoS in real-time streaming system. In order to reduce application cost, the existing streaming service is used in NAQoS. A new module is integrated into the existing server and client. So the router and network line are not changed. By simulation in heavy traffic network conditions, we proved that stream cannot be seamless without network adaptive QoS method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.6
• /
• pp.13-20
• /
• 2017

High-rise building shapes are changing from orthogonal to irregular form and the current trend is to arrange members in geometric grid-patterns at the perimeter of buildings. This study proposes a simple model for the preliminary design of a hexagrid high-rise building. The size of the cross section is set to be different at each module and hexagrid unit, which is different from the previous studies in which all hexagrid members were the same. To examine the effect of hexagrid size on structural performance, 60-story hexagrid buildings with 1-, 2- and 4-story high modules are designed and analyzed. Maximum lateral displacement, steel tonnage, load carrying percentage of perimeter frame and combined strength ratio are compared for 15 buildings. As the lateral load carrying capacity of hexagrid structure was inferior to a diagrid structural system, proper lateral stiffness should be allocated to the core frame in a hexagrid structure. The best ratio of flexural to shear deformation was 4 and larger unit size was better in considering constructional cost and structural efficiency. As the maximum lateral displacements of the buildings were within 84%~108% of the limit, the proposed method seems to be applicable to preliminary design of hexagrid buildings.