• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.11
• /
• pp.1988-1993
• /
• 2008

Photovoltaic (PV) modules operate over a large range of conditions but manufacturer's information is not sufficient to determine their overall performance. Designers need a reliable tool to predict energy production from a photovoltaic module under all conditions in order to make a sound decision. The modeling method of photovoltaic (PV) module are useful to perform detailed analysis of PV system performance for changing meteorological conditions, verify actual rated power of PV system sizing and determine the optimal design of PV system and components. This paper indicates a modeling approach of PV module performance in terms of meteorological conditions and identifies validity of PV modules modeling by comparing measured with simulated value.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2009.10a
• /
• pp.263-266
• /
• 2009

In the photovoltaic applications, MPPT(maximum power point tracking) method is essential due to the non-lineality of photovoltaic output characteristics. To ensure stable tracking response, two sensors are required in conventional popular MPPTs. In modularized PV system as an AC module system, the cost of a sensor can have an effect on entire system cost because a power conditioning device is connected in a PV module. Because only a current sensor is required for proposed MPPT, it is helpful in the cost reduction point of view. In this paper, a novel MPPT using current sensor is proposed In the proposed MPPT, the voltage is derived from sensed current value. The proposed method is verified by simulation results.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1996.04a
• /
• pp.381-385
• /
• 1996

본 연구에서는 자동화 제조 시스템 (Automatic Manufacturing System :AMS)의 설계및 구현에 있어서 물리적인 검증 (Physical Validation)을 위한 소프트웨어 시스템의 구조를 제안하고 구현하였다. 제안된 소프트웨어 시스템은 설비들과 물류 흐름에 있어서 간섭 검증과 운영 가능성을 검증하는 기능을 제공하며 크게 4개의 모듈로 나누어져 있다. : 1) 기본 형상들을 이용하여 원하는 형상을 정의하는 "Shape Modeling Module", 2) 실제 설비의 Kinematics와 기능을 모델링하는 "Facility Modeling Module", 3) AMS의 물리적인 배치를 구성하는 "Layout Design Module", 4) 모델링된 AMS를 실행시켜 볼 수 있는 "Factory Emulation Module". 이와 같은 소프트웨어 시스템을 구현하기 위해 수행된 주된 연구는 다음과 같다. : 1) AMS를 구성하는 설비들을 모델링하는 방법을 제시, 2) 표준 설비들의 Instancing Parameter 제시, 3) C++과 GL을 이용하여 소프트웨어로의 구현, 4) Flexible Manufacturing System (FMS)에의 응용.lexible Manufacturing System (FMS)에의 응용.

• The Journal of the Korea Contents Association
• /
• v.6 no.4
• /
• pp.55-62
• /
• 2006

Important issues emerging with the opening of the ubiquitous age are how to present ubiquitous environment and how services and access methods can be provided to users. The present research proposes a system that can provide users with useful information dynamically through intelligent multi agents in mobile environment. The system is composed of profile module, rule generation module, filtering module and service module. It was designed to find users' demands in an intelligent way based on information on users registered through the recommendation agent. We implemented an applied system and proved its performance through an experiment.

• Journal of Korea Multimedia Society
• /
• v.18 no.10
• /
• pp.1172-1179
• /
• 2015

A wireless license plate region extracting module is proposed for LPR system controlling multiple gates. This module is cheaply implemented using Raspberry Pi which is open source and high performance. First, as the upper 1/3 of the captured image is discarded as it has no useful information on license plate. Using the OpenCV libraries the edge image is got by Canny algorithm after applying Gaussian filtering to gray image, and the labeling is conducted for 4 consecutive numbers in license plate. These numbers are located using various decision equations, and expanding the numbers region the final license plate region can be extracted. The result image is transferred to Server using wifi direct. Using the proposed module it becomes easy to set up and maintain the LPR system. The experimental results showed that the successful extracting rate was 98.4% using 500 car images with 640 × 480 resolution.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.40 no.8
• /
• pp.836-844
• /
• 1991

PLC(programmable logic controller) system is widely used for the control of factory. PLC system receives ladder diagram which is drawn by the user to implement hardware logic, converts the ladder diagram into sequence program which is executable in the PLC system, and executes the sequence program indefinitely unless user breaks. The sequence program processes the data of on/off signal, and endures 1 scan delay and missing of pulse-type signal shorter than a scan time. So, data dependency doesn't exist. By applying theis characteristics to multiprocessor architecture, we design parellel PLC functionally and evaluate performance upgrade. Parallel PLC consists of central processing module, N general processing unit, and a shared memory by master-slave type. Each module executes allocated sequence program by the control of central processing module. We can expect performance upgrade by parallel processing, and reliability by relocation of sequence program when error occurs in processing module.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.41 no.6
• /
• pp.55-60
• /
• 2004

Most vehicles having automatic transmission system use fixed standard shift map to provide automatic transmission for driver. In this case, driver who operates vehicle may be complaint with the fixed transmission pattern being different from the driver's intention. In this paper, therefore, to infer the driver's intention module for learning the driver's intention with related input variables using soft computing method is proposed. After inference, the standard shift map will be shifted according to a certain parameter decided from the proposed module for providing proper shift pattern. The efficiency of the proposed module is evaluated by the data acquired from real time driving.

• Proceedings of the KSPS conference
• /
• 2007.05a
• /
• pp.330-333
• /
• 2007

This paper presents a dialogue interface using the dialogue management system as a method for controlling home appliances in Home Network Services. In order to realize this type of dialogue interface, we annotated 96,000 utterance pair sized dialogue set and developed an example-based dialogue system. This paper introduces the automatic error correction module for the SMS-styled sentence. With this module we increase the accuracy of NLU(Natural Language Understanding) module. Our NLU module shows an accuracy of 86.2%, which is an improvement of 5.25% over than the baseline. The task completeness of the proposed SMS dialogue interface was 82%.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2001.11a
• /
• pp.222-226
• /
• 2001

In this paper, 2.4GHz RF Module using Even Harmonic Mixer(EHM) was designed and fabricated for Direct conversion(DC) system. By minimizing performance degradation of DC system with DC offset and LO radiation, the capability of minimization and one chip solution in wireless system was proposed. The designed EHM using anti-parallel diode pair represented 9dB conversion loss and about -60dBm 2LO leakage radiation in RF port, and output reflection and reverse transmission characteristic of low noise amplifier was improved. So superior DC offset suppression characteristic is expected. RF Module which consists of EHM, LNA, RF amplifier, Frequency synthesizer and Duplexer was designed and fabricated.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.2
• /
• pp.325-333
• /
• 2007

A PV system inverter test module using RTDS was developed and performance test of a commercial PV inverter was carried out. The developed module consists of one RTDS hardware rack, RTDS software models representing PV array and simple distribution system, and two power amplifiers that was specifically designed for generating power corresponding to signals from RTDS. Performance test results verified effectiveness and reliability of the test module. It is expected that the developed test module may help PV inverter manufacturers improve ana test their systems in the developing stage.