• The Journal of the Korea Contents Association
• /
• v.10 no.8
• /
• pp.84-94
• /
• 2010

ESM can do and wishes to investigate ESM software field base technology and investigate ESM software technology, market, standard and evaluation certification trend and develop evaluation model of ESM software that it becomes foundation to protect ESM software effectively that develop quality evaluation model of ESM software in this research by integration security administration system that gather fire wall, IDS, VPN etc. various kind of security solution by one. That is, because reflecting requirement of ESM software, develop evaluation module and proposed evaluation example along with method of exam.

• 한국전산유체공학회:학술대회논문집
• /
• 2011.05a
• /
• pp.117-123
• /
• 2011

The low electric power and high efficiency chips are required because of the appearance of smart phones. Also, high-capacity memory chips are needed. e-MMC(embedded Multi-Media Card) for this is defined by JEDEC(Joint Electron Device Engineering Council). The e-MMC memory for research and development is a memory mulit-chip module of 64GB using 16-multilayers of 4GB NAND-flash memory. And it has simplified the chip by using SIP technique. But mulit-chip module generates high heat by higher integration. According to the result of study, whenever semiconductor chip is about 10 $^{\circ}C$ higher than the design temperature it makes the life of the chip shorten more than 50%. Therefore, it is required that we solve the problem of heating value and make the efficiency of e-MMC improved. In this study, geometry of 16-multilayered structure is compared the temperature distribution of four different geometries along the numerical analysis. As a result, it is con finned that a multilayer structure of stair type is more efficient than a multilayer structure of vertical type because a multi-layer structure of stair type is about 9 $^{\circ}C$ lower than a multilayer structure of vertical type.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.11
• /
• pp.1849-1855
• /
• 2003

Newly commercialized wireless capsule endoscope has many advantages compared to conventional push-type endoscopes. However, it is moved by the peristaltic waves. Therefore, it can not diagnose desired zones actively. In this paper, a locomotive mechanism for wireless capsule endoscope is proposed to increase the efficiency of endoscopy. We designed and fabricated a prototype using SMA springs and bio-mimetic clamping device. The hollow space in the prototype is allocated for further system integration of a camera module, a RF module and a battery. And the sequential control scheme is employed to improve the efficiency of its locomotion. To validate the performance of the locomotive mechanism, experiments on a silicone rubber pad and in vitro tests are carried out. The results of the experiments indicate that proposed mechanism is effective in harsh environments such as digestive organs of a human.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.100-103
• /
• 2008

In this paper, we propose H.264 Encoder integrating Intra Prediction, Deblocking filter, Context-Based Adaptive Variable Length Coding, and Motion Estimation encoder module. This designed module can be operated in 440 cycle for one-macroblock. To verify the Encoder architecture, we developed the reference C from JM 9.4 and verified the our developed hardware using test vector generated by reference C. The designed circuit can be operated in 166MHz clock system, and has 1800k gate counts using Charterd 0.18um process including SRAM memory. Manufactured chip has the size of $6{\times}6mm$ and 208 pins package.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.12
• /
• pp.2647-2654
• /
• 2009

In this paper, we propose H.264 Encoder integrating Intra Prediction, Deblocking Filter, Context-Based Adaptive Variable Length Coding, and Motion Estimation encoder module. This designed module can be operated in 440 cycle for one-macroblock. To verify the Encoder architecture, we developed the reference C from JM 9.4 and verified the our developed hardware using test vector generated by reference C. The designed circuit can be operated in 166MHz clock system, and has 1800K gate counts using Charterd 0.18 um process including SRAM memory. Manufactured chip has the size of $6{\times}6mm$ and 208 pins package.

• KIEAE Journal
• /
• v.7 no.6
• /
• pp.17-22
• /
• 2007

The integration of PV modules into building facades or roof could raise their temperature that results in the reduction of PV system's electrical power generation. Hot air can be extracted from the space between PV modules and building envelope, and used for heating in buildings. The extraction of hot air from the space will enhance the performance of BIPV systems. The solar collector utilizing these two aspects is called PV/T(photovoltaic/thermal) solar collector. This paper compares the experimental performance of two different types of air type PV/T collector units: the base case of a collector unit with 10cm gap for forced ventilation and the other unit with copper pin attached to PV module to enhance its thermal performance. The experimental results shows that the base case unit had the overall efficiency of 41.9% and the improved unit with copper pin attached to PV module had 50.1% efficiency. For these air type PV/T units, the forced ventilation of the air space improved the electrical performance as well as the thermal performance.

• Journal of the Korea Society for Simulation
• /
• v.31 no.4
• /
• pp.1-10
• /
• 2022

This paper describes the development of a modular simulation environment to analyze the performance of guided weapons. For the reusability of the simulation environment, components of the guided weapon simulation are modularized based on MATLAB Simulink. And the module management system is implemented based on Excel and MATLAB GUI for simulation interface and module management. In addition, a method of integration for modules with different interface and a method to set up the guidance and control phase for designing a guided flight scenario are suggested. Finally, to verify the performance of the implemented simulation environment, it was compared with the existing simulation results.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.37 no.2
• /
• pp.154-163
• /
• 2024

The energy demand in the world is expected to exceed 740 million TJ by 2040 and our dependence on fossil fuels needs to be switched to sustainable and renewable energy sources like solar energy. Building Integrated Photovoltaic (BIPV) is one of the best approaches to extracting solar energy. There are more than 200 BIPV products in the market currently but when it comes to integrating these products into the technical aspects such as buildings' structural integrity, thermal, daylight retainment and aesthetic prospects to be considered. The share of BIPV integration potential of different building types in the world of residential, agricultural, industrial, commercial and other buildings account for 66%, 4.8%, 8.1%, 19.9%, and 1.2% accordingly. Many solar technologies developed to achieve architectural requirements, but the main problem is the trade-off between efficiency and aesthetic appeal, which is less than 10% in coloured and transparent solar modules. This paper discusses the different applications of solar photovoltaics (PV) in building architecture, technical requirements, and different module technologies. The article provides a comprehensive guide for researchers and designers working on the development of BIPV integrations.

• Korean Journal of Computational Design and Engineering
• /
• v.12 no.2
• /
• pp.137-145
• /
• 2007

This paper concerns about residential environment analysis program implementation for design and analysis on public housing complexes such that view and daylight analysis processes are automated and integrated into existing design routine to achieve better design efficiency. Considering the architectural design trends this paper chooses ArchiCAD as a platform for a CAD system, which contains the concepts such as integrated object-oriented CAD, virtual building and BIM. Residential environment analysis system consists of three components. The first component is the 3D modeling part defining 3D form information for external geographic contour models, site models and interior/exterior of apartment buildings. The second is the parametric library part handling the design parameters for view and daylight analysis. The last is the user interface for the input/output and integration of data for the environment analysis. Daylight analysis shows rendered images as well as results of daylight reports and grades per time and performs the calculations for floor shadow. It separates the site-only analysis from the analysis of site and exterior environmental parameters. View analysis considers horizontal and vertical view angles to produce view image from each unit and uses the bitmap analysis method to determine opening ratio, scenery ratio and void ratio. We could expect better performance and precision from this residential environment analysis system than the existing 2D drawing based view and daylight analysis methods and overcome the existing one-way flow of design information from 3D form to analysis reports so that site design modifications are automatically reflected on analysis results. Each part is developed in a module so that further integration and extension into other related estimation and construction management systems are made possible.

• Journal of Korea Water Resources Association
• /
• v.35 no.4 s.129
• /
• pp.359-366
• /
• 2002

The damages from the natural disasters, especially from the floods, have been increasing. Therefore, it is imperative to establish a BMP to diminish the damages from the floods and to enhance the welfare of the nation. Developed countries have been generating and utilizing flood risk maps to raise the alertness of the residents, and thereby achieving efficient flood management. The major objectives of this research were to develop a prototype management system for flood risk map to forecast the boundaries oi the inundation and to plot them through the integration of geographic and hydrologic database. For more efficient system development, the user requirement analysis was made. The GIS database design was done based on the results from the research work of river information standardization. A GIS database for the study area was built by using topographic information to support the hydrologic modeling. The developed prototype include several modules; river information edition module, map plotting module, and hydrologic modeling support module. Each module enabled the user to edit graphic and attribute data, to analyze and to represent the modeling results visually. Subjects such as utilization of the system and suggestions for future development were discussed.