• 제목/요약/키워드: Modulation code

검색결과 457건 처리시간 0.025초

BOC 신호 동기화를 위한 새로운 주변 첨두 제거 기법 (A Novel Side-Peak Cancellation Method for BOC Signal Synchronization)

  • 김상훈;윤태웅;이영윤;한태희;윤석호
    • 한국통신학회논문지
    • /
    • 제34권1C호
    • /
    • pp.131-137
    • /
    • 2009
  • Bin offset carrier (BOC) 신호 동기화 과정은 GPS, Galileo와 같은 위성항법시스템에서 가장 중요한 단계이다. BOC 신호 동기화 과정은 일반적으로, 수신 BOC 신호와 단말기의 BOC 신호 사이의 상관함수를 이용하여 이루서진다. 따라서 BOC 자기상관함수의 다중 첨두 문제는 동기화 오차의 주요한 원인이 된다. 최근 Julien에 의해 BOC 상관함수 상의 주변 첨두 크기를 줄일 수 있는 기법이 제안되었다. 그러나 이 기법은 주변 첨두를 완벽히 제거하지 못하며, 적용할 수 있는 신호도 제한적이다. 본 논문에서는 주변 첨두가 완벽히 제거된 새로운 상관함수를 제안하였다. 제안한 상관함수는 sine 위상 및 cosine 위상의 BOC 신호 모두에 적용할 수 있으며, 주변 첨두를 완벽히 제거할 수 있다. 또한 제안한 상관함수를 효율적으로 구현할 수 있는 상관기 구조도 제안하였다.

DSP 기반 MPSK 수신기에서 위상천이 검출을 이용한 동기 알고리즘과 복조 (Synchronization Algorithm and Demodulation using the Phase Transition Detection in the DSP based MPSK Receiver)

  • 이준서;맹준호;유흥균;박철순;장원
    • 한국전자파학회논문지
    • /
    • 제15권10호
    • /
    • pp.952-960
    • /
    • 2004
  • 다양한 디지털 변복조 기술 중에서 PSK(Phase Shift Keying) 변조방식은 보편적으로 사용되는 송신 방식이다. 특히 CDMA 시스템에 이용되는 PSK 방식은 부호 오율 및 대역폭 양면에서 우수하다. 본 연구에서 사용하는 DSP 기술은 소프트웨어만을 이용하는 기술로 부가적인 하드웨어 없이 새로운 여러 가지의 송수신모드를 제공할 수 있다. 본 논문에서는 기존의 복잡한 아날로그 회로를 이용한 PSK계열의 BPSK복조기와 QPSK복조기 대신, DSP 기술을 기반으로 한 M-ary PSK(M=2, 4)복조기를 구현한다. 또한, 기존의 PSK복조기의 경우 아날로그 PLL의 동기포착 회로를 이용하여 동기를 확보하였으나, 동기회로 없이 프로그램을 사용하여 PSK신호를 복조하는 알고리즘을 제안한다. DSP는 TMS320C6203을 이용하였으며, DSP 장비에 프로그램을 에뮬레이션 시킨 후의 결과 파형을 DSP 개발툴인 code builder를 사용하여 graph view 창을 통해 확인했다. 그 결과 복조파형은 기존의 복잡한 아날로그 회로와 동일한 성능으로 정확히 신호를 복조할 수 있으며, 어떠한 주변장치를 사용하지 않고, 소프트웨어만으로 다양한 레벨의 변조파형을 복조함을 확인한다.

백서의 척수강 내로 투여한 Sildenafil의 진통효과에 대한 Opioid 수용체 역할에 관한 연구 (The Role of Opioid Receptor on the Analgesic Action of Intrathecal Sildenafil in Rats)

  • 이형곤;정창영;윤명하;김웅모;신승헌;김여옥;황란희;최금화
    • The Korean Journal of Pain
    • /
    • 제20권1호
    • /
    • pp.21-25
    • /
    • 2007
  • Background: Intrathecal sildenafil has produced antinociception by increasing the cGMP through inhibition of phosphodiesterase 5. Spinal opioid receptor has been reported to be involved in the modulation of nociceptive transmission. The aim of this study was to examine the role of opioid receptor in the effect of sildenafil on the nociception evoked by formalin injection. Methods: Rats were implanted with lumbar intrathecal catheters. Formalin testing was used as a nociceptive model. Formalin-induced nociceptive behavior (flinching response) was observed. To clarify the role of the opioid receptor for the analgesic action of sildenafil, naloxone was administered intrathecally 10 min before sildenafil delivery, and formalin was then injected 10 min later. Results: Intrathecal sildenafil produced dose-dependent suppression of flinches in both phases during the formalin test. Intrathecal naloxone reversed the analgesic effect of sildenafil in both phases. Conclusions: Sildenafil is active against the nociceptive state that's evoked by a formalin stimulus, and the opioid receptor is involved in the analgesic action of sildenafil at thespinal level.

Digitally Controlled Single-inductor Multiple-output Synchronous DC-DC Boost Converter with Smooth Loop Handover Using 55 nm Process

  • Hayder, Abbas Syed;Park, Young-Jun;Kim, SangYun;Pu, Young-Gun;Yoo, Sang-Sun;Yang, Youngoo;Lee, Minjae;Hwang, Keum Choel;Lee, Kang-Yoon
    • Journal of Power Electronics
    • /
    • 제17권3호
    • /
    • pp.821-834
    • /
    • 2017
  • This paper reports on a single-inductor multiple-output step-up converter with digital control. A systematic analog-to-digital-controller design is explained. The number of digital blocks in the feedback path of the proposed converter has been decreased. The simpler digital pulse-width modulation (DPWM) architecture is then utilized to reduce the power consumption. This architecture has several advantages because counters and a complex digital design are not required. An initially designed unit-delay cell is adopted recursively for the construction of coarse, intermediate, and fine delay blocks. A digital limiter is then designed to allow only useful code for the DPWM. The input voltage is 1.8 V, whereas output voltages are 2 V and 2.2 V. A co-simulation was also conducted utilizing PowerSim and Matlab/Simulink, whereby the 55 nm process was employed in the experimental results to evaluate the performance of the architecture.

Mathematical Analysis Power Spectrum of M-ary MSK and Detection with Optimum Maximum Likelihood

  • Niu, Zheng;Jiang, Yuzhong;Jia, Shuyang;Huang, Zhi;Zou, Wenliang;Liu, Gang;Li, Yu
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제15권8호
    • /
    • pp.2900-2922
    • /
    • 2021
  • In this paper, the power spectral density(PSD) for Multilevel Minimum Shift Keyed signal with modulation index h = 1/2 (M-ary MSK) are derived using the mathematical method of the Markov Chain model. At first, according to an essential requirement of the phase continuity characteristics of MSK signals, a complete model of the whole process of signal generation is built. Then, the derivations for autocorrelation functions are carried out precisely. After that, we verified the correctness and accuracy of the theoretical derivation by comparing the derived results with numerical simulations using MATLAB. We also divided the spectrum into four components according to the derivation. By analyzing these figures in the graphic, each component determines the characteristics of the spectrum. It is vital for enhanced spectral characteristics. To more visually represent the energy concentration of the main flap and the roll-down speed of the side flap, the specific out-of-band power of M-ary MSK is given. OMLCD(Optimum Maximum Likelihood Coherent Detection) of M-ary MSK is adopted to compare the signal received with prepared in advance in a code element T to go for the best. And M-ary MSK BER(Bit Error Rate) is compared with the same ary PSK (Phase Shift Keying) with M=2,4,6,8. The results show the detection method could improve performance by increasing the length of L(memory inherent) in the phase continuity.

홀로그램 용 증강현실 객체의 네트워크 랜더링을 위한 보안 기법 설계 (Design of Security Method for Network Rendering of Augmented Reality Object)

  • 김석수;김동현
    • 융합정보논문지
    • /
    • 제9권1호
    • /
    • pp.92-98
    • /
    • 2019
  • 홀로그램 디스플레이 기술의 발전으로 인하여 증강현실에 대한 실감형 콘텐츠를 제공하기 위한 다양한 연구들이 진행되고 있다. 홀로그램용 HMD의 경우 소형의 프로세서에서 증강현실의 객체를 랜더링하여 제공하여야 하기 때문에 저용량의 콘텐츠를 사용해야하는 문제점이 있어 이를 해결하고자 네트워크를 통해 콘텐츠의 리소스를 제공하여 랜더링하는 기술이 필요하다. 기존의 증강현실 시스템의 경우 내부 저장 공간에서 리소스를 불러와 랜더링하기 때문에 콘텐츠 변조의 문제점이 없으나 네트워크를 통해 리소스를 제공할 경우 콘텐츠의 변조, 악의적인 코드 삽입 등 보안의 문제점을 고려해야 한다. 따라서 본 논문에서는 홀로그램 HMD 디바이스에서 증강현실 콘텐츠를 제공함에 있어 보안 기법을 적용한 네트워크 랜더링 기법을 제안한다.

프로그래머블 ROM 기반의 심플 PCM 엔코더 설계 (Design of a Simple PCM Encoder Architecture Based on Programmable ROM)

  • 김건희;진미현;김복기
    • 한국항행학회논문지
    • /
    • 제23권2호
    • /
    • pp.186-193
    • /
    • 2019
  • 본 논문에서는 커뮤테이션 방식을 이용한 심플 프로그래머블 PCM 엔코더 구조를 제시하고 구현하였다. 텔레메트리 시스템은 센서에서 획득한 데이터들로 프레임을 생성하기 위해 각각의 데이터들을 채널에 할당할 수 있는 정보가 필요하다. 이때 상태 정보의 수가 많거나 데이터 타입이 다양할 경우, 각 채널에 대량의 정보를 입력해야 할 필요성이 존재한다. 그러나 채널수와 데이터양이 많을수록 오류가 발생할 가능성이 증가한다. 따라서 본 논문에서는 프로그램을 이용하여 채널 정보를 작성하고, ROM에 채널 정보를 저장할 수 있는 PCM 엔코더를 구현하였다. 본 논문에서 제안한 PCM 엔코더 구조는 오류의 발생 가능성을 줄이고, 채널 정보 입력 소스 코드 길이의 축소 등 개발 속도를 향상시킬 수 있다. 또한 시뮬레이션을 이용하여 제안한 구조의 타당성을 확인하였다.

Kinetics calculation of fast periodic pulsed reactors using MCNP6

  • Zhon, Z.;Gohar, Y.;Talamo, A.;Cao, Y.;Bolshinsky, I.;Pepelyshev, Yu N.;Vinogradov, Alexander
    • Nuclear Engineering and Technology
    • /
    • 제50권7호
    • /
    • pp.1051-1059
    • /
    • 2018
  • Fast periodic pulsed reactor is a type of reactor in which the fission bursts are formed entirely with external reactivity modulation with a specified time periodicity. This type of reactors could generate much larger intensity of neutron beams for experimental use, compared with the steady state reactors. In the design of fast periodic pulsed reactors, the time dependent simulation of the power pulse is majorly based on a point kinetic model, which is known to have limitations. A more accurate calculation method is desired for the design analyses of fast periodic pulsed reactors. Monte Carlo computer code MCNP6 is used for this task due to its three dimensional transport capability with a continuous energy library. Some new routines were added to simulate the rotation of the movable reflector parts in the time dependent calculation. Fast periodic pulsed reactor IBR-2M was utilized to validate the new routines. This reactor is periodically in prompt supercritical state, which lasts for ${\sim}400{\mu}s$, during the equilibrium state. This generates long neutron fission chains, which requires tremendously large amount of computation time during Monte Carlo simulations. Russian Roulette was applied for these very long neutron chains in MCNP6 calculation, combined with other approaches to improve the efficiency of the simulations. In the power pulse of the IBR-2M at equilibrium state, there is some discrepancy between the experimental measurements and the calculated results using the point kinetics model. MCNP6 results matches better the experimental measurements, which shows the merit of using MCNP6 calculation relative to the point kinetics model.

효율적인 자원 활용을 위한 uC/OS-II 기반의 텔레메트리 PCM 엔코더 설계 (Design of uC/OS-II Based Telemetry PCM Encoder for Effective Resource Use)

  • 김건희;김복기
    • 한국항행학회논문지
    • /
    • 제28권3호
    • /
    • pp.315-322
    • /
    • 2024
  • 본 논문에서는 정해진 시간 내에 프레임을 전송해야 하는 텔레메트리 시스템에 적용하기 위한 실시간 운영체제 기반의 PCM 엔코더를 제안한다. 대형 비행체의 경우 각 센서 및 주변장치로부터 많은 상태 정보들을 계측하므로 시스템의 복잡성이 높아지는 추세이다. 또한 계측 데이터가 많아지면서 정해진 시간 내에 프레임을 전송하기 위한 PCM 엔코더의 역할이 중요해지고 있다. 기존 일반적인 엔코더는 규격이 변경되거나, 추가 기능 구현 시 유연성이 떨어지므로 이를 보완하기 위한 설계가 필요하다. 이에 작은 임베디드 소프트웨어에 탑재가 가능한 실시간 운영체제인 uC/OS-II를 적용한 PCM 엔코더 설계를 제안한다. 또한, 타당성을 확인하기 위해 태스크의 실행시간을 측정하는 시뮬레이션을 수행하여 성능을 확인하였다.

영상 압축센싱을 위한 블록기반 변환영역 측정 부호화 (Block-Based Transform-Domain Measurement Coding for Compressive Sensing of Images)

  • ;;;;박영현;전병우
    • 한국통신학회논문지
    • /
    • 제39A권12호
    • /
    • pp.746-755
    • /
    • 2014
  • 압축센싱은 신호의 성긴 (Sparse) 성질을 활용하여 Nyquist 표본화율 보다 낮은 측정 율만으로도 신호의 완벽 복원이 가능하다는 측면에서 새로운 샘플링 기술로 주목 받고 있다. 블록기반의 압축센싱 기술을 사용하여 영상을 샘플링 하는 경우, 측정신호 영역에서도 공간 영역의 유사도가 보존되므로, 본 논문에서는 블록기반 압축센싱 기술을 사용하여 획득한 자연영상의 측정 신호에 대한 새로운 부호화 기술을 제안한다. 측정신호 간 유사성을 제거하기 위해 이산 웨이블릿 변환(DWT)을 적용한 후, 각 DWT 계수에 적절한 양자화를 수행한다. 이를 통해, 측정 신호 내의 중복성을 제거하고, 측정 신호의 비트 율 또한 절약할 수 있었다. 실험 결과, 기존의 블록기반 평활 Projected Landweber 알고리즘에 스칼라 양자화를 적용한 방법, DPCM 방법을 적용한 방법, 그리고 Multihypothesis 기반 블록기반 평활알고리즘에 DPCM을 적용한 방법과 비교할 때, 제안방법의 PSNR이 각각 최대 4dB, 0.9dB, 그리고 2.5dB 더 높은 성능을 보이는 것을 확인 할 수 있었다.