• Journal of IKEEE
• /
• v.24 no.4
• /
• pp.961-968
• /
• 2020

This paper describes a design of high performance modular multiplier that is essentially used for elliptic curve cryptography. Our modular multiplier supports modular multiplications for five field sizes over GF(p), including 192, 224, 256, 384 and 521 bits as defined in NIST FIPS 186-2, and it calculates modular multiplication in two steps with integer multiplication and reduction. The Karatsuba-Ofman multiplication algorithm was used for fast integer multiplication, and the Lazy reduction algorithm was adopted for reduction operation. In addition, the Nikhilam division algorithm was used for the division operation included in the Lazy reduction. The division operation is performed only once for a given modulo value, and it was designed to skip division operation when continuous modular multiplications with the same modulo value are calculated. It was estimated that our modular multiplier can perform 6.4 million modular multiplications per second when operating at a clock frequency of 32 MHz. It occupied 456,400 gate equivalents (GEs), and the estimated clock frequency was 67 MHz when synthesized with a 180-nm CMOS cell library.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.7
• /
• pp.2610-2630
• /
• 2021

The aim of this paper is to propose the alternative algorithm to finish the process in public key cryptography. In general, the proposed method can be selected to finish both of modular exponentiation and point multiplication. Although this method is not the best method in all cases, it may be the most efficient method when the condition responds well to this approach. Assuming that the binary system of the exponent or the multiplier is considered and it is divided into groups, the binary system is in excellent condition when the number of groups is small. Each group is generated from a number of 0 that is adjacent to each other. The main idea behind the proposed method is to convert the exponent or the multiplier as the subtraction between two integers. For these integers, it is impossible that the bit which is equal to 1 will be assigned in the same position. The experiment is split into two sections. The first section is an experiment to examine the modular exponentiation. The results demonstrate that the cost of completing the modular multiplication is decreased if the number of groups is very small. In tables 7 - 9, four modular multiplications are required when there is one group, although number of bits which are equal to 0 in each table is different. The second component is the experiment to examine the point multiplication process in Elliptic Curves Cryptography. The findings demonstrate that if the number of groups is small, the costs to compute point additions are low. In tables 10 - 12, assigning one group is appeared, number of point addition is one when the multiplier of a point is an even number. However, three-point additions are required when the multiplier is an odd number. As a result, the proposed method is an alternative way that should be used when the number of groups is minimal in order to save the costs.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.3C
• /
• pp.256-262
• /
• 2002

This paper presents a novel radix-4 modular multiplication algorithm based on the sign estimation technique (3). The sign estimation technique detects the sign of a number represented in the form of a carry-sum pair. It can be implemented with 5-bit carry look-ahead adder. The hardware speed of the cryptosystem is dependent on the performance modular multiplication of large numbers. Our algorithm requires only (n/2+3) clock cycle for n bit modulus in performing modular multiplication. Our algorithm out-performs existing algorithm in terms of required clock cycles by a half, It is efficient for modular exponentiation with large modulus used in RSA cryptosystem. Also, we use high-speed adder (7) instead of CPA (Carry Propagation Adder) for modular multiplication hardware performance in fecal stage of CSA (Carry Save Adder) output. We apply RL (Right-and-Left) binary method for modular exponentiation because the number of clock cycles required to complete the modular exponentiation takes n cycles. Thus, One 1024-bit RSA operation can be done after n(n/2+3) clock cycles.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.4
• /
• pp.57-66
• /
• 2004

This paper proposes the design of a 2,048-bit RSA based on RNS(residue number systems) Montgomery modular multiplier As the systems that RNS processes a fast parallel modular multiplication for a large word partitioned into small words, we introduce Montgomery reduction method(MRM)［1］based on Wallace tree modular multiplier and 33 RNS bases with 64-bit size for RNS Montgomery modular multiplication in this paper. Also, for fast RNS modular multiplication, a modified method based on Chinese remainder theorem(CRT)［2］ is presented. We have verified 2,048-bit RSA based on RNS using Samsung 0.35${\mu}{\textrm}{m}$ technology and the 2,048-bit RSA is performed in 2.54㎳ at 100MHz.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.7 no.2
• /
• pp.73-92
• /
• 1997

A modular exponentiation( E$M^{$=varepsilon$}$mod N) is one of the most important operations in Public-key cryptography. However, it takes much time because the modular exponentiation deals with very large operands as 512-bit integers. Modular exponentiation is composed of repetition of modular multiplications, and the number of repetition is the same as the length of the addition-chain of the exponent(E). Therefore, we can reduce the execution time of modular exponentiation by finding shorter addition-chain(i.e. reducing the number of repetitions) or by reducing the execution time of each modular multiplication. In this paper, we propose an addition-chain heuristics and two fast modular multiplication algorithms. Of two modular multiplication algorithms, one is for modular multiplication between different integers, and the other is for modular squaring. The proposed addition-chain heuristics finds the shortest addition-chain among exisiting algorithms. Two proposed modular multiplication algorithms require single-precision multiplications fewer than 1/2 times of those required for previous algorithms. Implementing on PC, proposed algorithms reduce execution times by 30-50% compared with the Montgomery algorithm, which is the best among previous algorithms.

• The Journal of Information Technology
• /
• v.3 no.1
• /
• pp.61-72
• /
• 2000

In this paper, we propose a bit-sliced modular multiplication algorithm and a bit-sliced modular multiplier design meeting the increasing crypto-key size for RSA public key cryptosystem. The proposed bit-sliced modular multiplication algorithm was designed by modifying the Walter's algorithm. The bit-sliced modular multiplier is easy to expand to process large size operands, and can be immediately applied to RSA public key cryptosystem.

• Proceedings of the Korea Institutes of Information Security and Cryptology Conference
• /
• 1995.11a
• /
• pp.173-182
• /
• 1995

모듈라 멱승(modular exponentiation) 연산은 암호학에서 기본적이고 중요한 연산이다. 그러나, 이는 다정도 정수(multiple precision integer)들을 다루기 때문에 그 연산시 간이 무척 많이 걸리므로 이를 단축시킬 필요가 있다. 모듈라 멱승 연산은 모듈라 곱셈(modular multiplication)의 반복으로서, 전체 연산시간을 단축시키기 위해서는 모듈라 곱셈의 수행시간을 단축시키거나, 모듈라 곱셈의 반복횟수를 줄이는 것이 필요하다. 본 논문에서는 모듈라 곱셈을 빠르게 수행하기 위한 알고리즘 두 개를 제안한다. 하나는 서로 다른 두 수의 모듈라 곱셈 알고리즘이고, 다른 하나는 모듈라 제곱을 빠르게 수행하는 알고리즘이다. 이 둘은 기존의 모듈라 곱셈 알고리즘들에 비해 각각 절반과, l/3가량의 단정도 곱셈(single-precision multiplication)만을 필요로 한다. 실제로 PC상에서 구현한 결과 각각 100%와 30%의 속도향상을 보인다.

• Proceedings of the Korea Institutes of Information Security and Cryptology Conference
• /
• 1995.11a
• /
• pp.163-172
• /
• 1995

In this paper, the bit-level 1-dimensionl systolic array for modular multiplication are designed. First of all, the parallel algorithms and data dependence graphs from Walter's Iwamura's methods based on Montgomery Algorithm for modular multiplication are derived and compared. Since Walter's method has the smaller computational index points in data dependence graph than Iwamura's, it is selected as the base algorithm. By the systematic procedure for systolic array design, four 1-dimensional systolic arrays ale obtained and then are evaluated by various criteria. Modifying the array derived from 〔0,1〕 projection direction by adding a control logic and serializing the communication paths of data A, optimal 1-dimensional systolic array is designed. It has constant I/O channels for modular expandable and is good for fault tolerance due to unidirectional paths. And so, it is suitable for RSA Cryptosystem which deals with the large size and many consecutive message blocks.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.12 no.2
• /
• pp.35-44
• /
• 2002

In this paper, an implementation method of RSA exponentiator based on Radix-$2^k$ modular multiplication algorithm is presented and verified. We use Booth receding algorithm to implement Radix-$2^k$ modular multiplication and implement radix-16 modular multiplier using 2K-byte memory and CSA(carry-save adder) array - with two full adder and three half adder delays. For high speed final addition we use a reduced carry generation and propagation scheme called pseudo carry look-ahead adder. Furthermore, the optimum value of the radix is presented through the trade-off between the operating frequency and the throughput for given Silicon technology. We have verified 1,024-bit RSA processor using Altera FPGA EP2K1500E device and Samsung 0.3$\mu\textrm{m}$ technology. In case of the radix-16 modular multiplication algorithm, (n+4+1)/4 clock cycles are needed and the 1,024-bit modular exponentiation is performed in 5.38ms at 50MHz.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.12 no.5
• /
• pp.95-105
• /
• 2002

This paper describes an efficient method to implement a hardware circuit of RSA public key cryptographic algorithm, which is important to public-key cryptographic system for an authentication, a key exchange and a digital signature. The RSA algorithm needs a modular exponential for its cryptographic operation, and the modular exponential operation is consists of repeated modular multiplication. In a numerous algorithm to compute a modular multiplication, the Montgomery algorithm is one of the most widely used algorithms for its conspicuous efficiency on hardware implementation. Over the past a few decades a considerable number of studies have been conducted on the efficient hardware design of modular multiplication for RSA cryptographic system. But many of those studies focused on the decrease of operating time for its higher performance. The most important thing to design a hardware circuit, which has a limit on a circuit area, is a trade off between a small circuit area and a feasible operating time. For these reasons, we modified the Montgomery algorithm for its efficient hardware structure for a system having a limit in its circuit area and implemented the refined algorithm in the IESA system developed for ETRI's smart card emulating system.